Thermoplastics valves - Torque - Test method (ISO 8233:1988)

Specifies a test method for the determination of the opening and closing torque of thermoplastic valves. Testing shall be carried out by nominal pressure before and after a conditioning period.

Armaturen aus Thermoplasten - Drehmoment - Prüfmethode (ISO 8233:1988)

Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:1988)

La présente Norme internationale spécifie une méthode d'essai pour la détermination du couple d'ouverture et de fermeture des robinets en matériaux thermoplastiques.
La présente Norme internationale s'applique à tout type de robinet en matériaux thermoplastiques pour emploi dans le transport de fluides.

Plastomerni ventili - Vrtilni moment - Preskusna metoda (ISO 8233:1988)

General Information

Status
Withdrawn
Publication Date
11-Dec-1990
Withdrawal Date
12-Mar-2024
Technical Committee
Current Stage

Relations

Buy Standard

Standard
EN 28233:1997 (EN)
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 28233:1997 (DE)
German language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastomerni ventili - Vrtilni moment - Preskusna metoda (ISO 8233:1988)Armaturen aus Thermoplasten - Drehmoment - Prüfmethode (ISO 8233:1988)Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:1988)Thermoplastics valves - Torque - Test method (ISO 8233:1988)83.140.30Cevi, fitingi in ventili iz polimernih materialovPlastics pipes, fittings and valvesICS:Ta slovenski standard je istoveten z:EN 28233:1990SIST EN 28233:1997en01-februar-1997SIST EN 28233:1997SLOVENSKI
STANDARD



SIST EN 28233:1997



SIST EN 28233:1997



SIST EN 28233:1997



IS0 INTERNATIONAL STANDARD 8233 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXAYHAPOflHAfl OPI-AHM3AuMR n0 CTAHflAPTM3A~MM Thermoplastics valves - Torque - Test method Rob/nets en mathaux thermoplastiques - Couple de mantwvre - Mkthode d’essai First edition 1988-12-15 Corrected and reprinted 1989~05- 15 Reference number IS0 8233 : 1988 (E) SIST EN 28233:1997



Iso 8233 : 1988 (El Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS0 8233 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. 0 International Organization for Standardization, 1988 Printed in Switzerland SIST EN 28233:1997



INTERNATIONAL STANDARD IS0 8233 : 1988 (El Thermoplastics valves - Torque - Test method I Scope This International Standard specifies a test method for the determination of the opening and closing torque of thermo- plastics valves. 2 Field of application This International Standard applies to all types of thermo- plastics valves intended to be used for the transport of fluids. 3 References IS0 W-1, Thermoplastics pipes for the transport of fluids - Nominal outside diameters and nominal pressures - Part I: Metric series. I SO 6708, Pipe components - Definition of nominal size. IS0 7349, Thermoplastics valves - Connection references. 4 Definitions For the purposes of this International Standard, the definition of the nominal diameter (DN) given in IS0 6708 and the follow- ing definitions apply. 4.1 closing torque: Torque exerted over the full closing operation to achieve full tightness of the valve at nominal pressure. 4.2 opening torque : Torque exerted initially to open the valve from fully closed or over the full opening operation. 4.3 nominal pressure (PN): Alphanumeric designation, used for reference purposes, related to the mechanical strength of a valve. Usually it corresponds to the service pr
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastomerni ventili - Vrtilni moment - Preskusna metoda (ISO 8233:1988)Armaturen aus Thermoplasten - Drehmoment - Prüfmethode (ISO 8233:1988)Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:1988)Thermoplastics valves - Torque - Test method
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.