EN ISO 3630-5:2011

Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2011)

This part of ISO 3630 specifies requirements and test methods for root canal instruments used for hand or mechanically operated instruments used to perform root canal procedures not cited in ISO 3630-1, 3630-2, 3630-3, or 3630-4. This document specifies requirements for size, marking, product designation, safety considerations, and their labeling and packaging, including the instructions for use.

Zahnheilkunde - Endodontische Instrumente - Teil 5: Form- und Reinigungsinstrumente (ISO 3630-5:2011)

Dieser Teil von ISO 3630 legt Anforderungen an und Prüfverfahren für von Hand oder mechanisch betätigte Form- und Reinigungsinstrumente für Wurzelkanalbehandlungen fest, die nicht in ISO 3630 1, ISO 3630 2, ISO 3630 3 oder ISO 3630 4 beschrieben werden.
Dieser Teil von ISO 3630 legt Anforderungen an Größe, Kennzeichnung, Produkt¬bezeichnung, Sicherheitsüberlegungen sowie Beschilderung und Verpackung fest.

Médecine bucco-dentaire - Instruments d'endodontie - Partie 5: Instruments de mise en forme et de nettoyage (ISO 3630-5:2011)

L'ISO 3630-5:2011 spécifie les exigences et méthodes d'essai, non citées dans l'ISO 3630‑1, l'ISO 3630‑2, l'ISO 3630‑3, ou l'ISO 3630‑4, relatives aux instruments de mise en forme et de nettoyage, à usage manuel ou mécanique, utilisés pour effectuer des traitements sur des canaux radiculaires.
Elle spécifie les exigences relatives à la taille, au marquage, à la désignation des produits et aux considérations de sécurité, ainsi qu'à leur étiquetage et emballage.

Zobozdravstvo - Instrumenti za zobni kanal - 5. del: Instrumenti za oblikovanje in čiščenje (ISO 3630-5:2011)

Ta del ISO 3630 določa zahteve in preskusne metode za instrumente za zobni kanal, ki se uporabljajo kot ročno ali mehansko upravljani instrumenti za izvedbo posegov v zobnem kanalu in niso navedeni v ISO 3630-1, 3630-2, 3630-3 ali 3630-4. Ta dokument določa zahteve za velikost, označevanje, poimenovanje proizvodov, varnostne vidike in uporabo nalepk ter pakiranje, vključno z navodili za uporabo.

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2011
• Withdrawal Date: 15-Sep-2020
• ICS: 11.060.20 - Dental equipment
• ICS: 11.060.25 - Dental instruments
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Sep-2020
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Ref Project: SIST EN ISO 3630-5:2011 - Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2011)

Relations

• Replaced By: EN ISO 3630-5:2020 - Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2020)
• Effective Date: 20-Feb-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3630-5:2011
01-december-2011
=RER]GUDYVWYR,QVWUXPHQWL]D]REQLNDQDOGHO,QVWUXPHQWL]DREOLNRYDQMHLQ
þLãþHQMH,62
Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630
-5:2011)
Zahnheilkunde - Wurzelkanalinstrumente - Teil 5: Form- und Reinigungsinstrumente
(ISO 3630-5:2011)
Médecine bucco-dentaire - Instruments pour canaux radiculaires - Partie 5: Instruments
de mise en forme et de nettoyage (ISO 3630-5:2011)
Ta slovenski standard je istoveten z: EN ISO 3630-5:2011
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 3630-5:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3630-5:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 3630-5:2011


EUROPEAN STANDARD
EN ISO 3630-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2011
ICS 11.060.20
English Version
Dentistry - Endodontic instruments - Part 5: Shaping and
cleaning instruments (ISO 3630-5:2011)
Médecine bucco-dentaire - Instruments d'endodontie - Zahnheilkunde - Endodontische Instrumente - Teil 5: Form-
Partie 5: Instruments de mise en forme et de nettoyage und Reinigungsinstrumente (ISO 3630-5:2011)
(ISO 3630-5:2011)
This European Standard was approved by CEN on 30 September 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3630-5:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3630-5:2011
EN ISO 3630-5:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3630-5:2011
EN ISO 3630-5:2011 (E)
Foreword
This document (EN ISO 3630-5:2011) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the
latest by April 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3630-5:2011 has been approved by CEN as a EN ISO 3630-5:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3630-5:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 3630-5:2011
INTERNATIONAL  ISO
STANDARD 3630-5
First edition
2011-10-01
Dentistry — Endodontic instruments —
Part 5:
Shaping and cleaning instruments
Médecine bucco-dentaire — Instruments d’endodontie —
Partie 5: Instruments de mise en forme et de nettoyage
Reference number
ISO 3630-5:2011(E)
©
 ISO 2011

---------------------- Page: 7 -------------
...