FprEN 14063-1

Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation

This document specifies the characteristics for loose-fill expanded clay lightweight aggregate products for in-situ installation in roofs, ceilings, floors and ground floors.
This document is a specification for the insulation products before installation.
This document also describes the product characteristics and includes procedures for testing, assessment and verification of the constancy of performance (AVCP), marking and labelling.
This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application.
This document does not specify performance characteristics for airborne sound insulation and for acoustic absorption applications.

Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung aus Blähton-Leichtzuschlagsstoffen - Teil 1: Spezifikation für die Schüttdämmstoffe vor dem Einbau

Dieses Dokument legt die Eigenschaften für Schüttdämmstoffe aus Blähton-Leichtzuschlagstoffen für die Verwendung in Dächern, Decken, Fußböden und Erdgeschossen fest.
Dieses Dokument enthält eine Spezifikation der Wärmedämmstoffe vor dem Einbau.
Dieses Dokument beschreibt außerdem die Produkteigenschaften und enthält Verfahren für Prüfung, Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP), Kennzeichnung und Etikettierung.
Dieses Dokument legt keine Anforderungsstufen für eine bestimmte Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungszweck gebrauchstauglich zu sein.
Dieses Dokument legt keine Leistungsmerkmale an die Luftschalldämmung und die Schallabsorption von Anwendungen fest.

Produits isolants thermiques pour le bâtiment - Isolation thermique formée en place à base de granulats légers d'argile expansée - Partie 1: Spécification des produits en vrac avant la mise en oeuvre

Le présent document spécifie les exigences concernant les produits en vrac de granulats légers d’argile expansée destinés à être installés dans les toitures, plafonds et planchers, y compris les planchers sur terre-plein.
Le présent document est une spécification pour les produits isolants avant la mise en oeuvre.
Le présent document décrit également les caractéristiques des produits et comprend des modes opératoires pour l’essai, le marquage et l’étiquetage.
Le présent document ne spécifie pas le niveau exigé pour une propriété donnée que doit présenter un produit pour démontrer son aptitude à l’emploi dans le cadre d’une application particulière. Les niveaux exigés pour une application particulière figurent dans les réglementations ou dans les normes non contradictoires.
Le présent document ne spécifie pas d’exigences de performance pour les applications d’isolement aux bruits aériens et d’absorption acoustique.

Toplotnoizolacijski materiali in proizvodi - Proizvodi iz ekspandiranega glinenega agregatnega proizvoda (LWA), oblikovani na mestu vgradnje - 1. del: Specifikacija za vezane in razsute proizvode pred vgradnjo

General Information

• Status: Not Published
• Publication Date: 27-Jan-2019
• Withdrawal Date: 28-Jul-2019
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 15 - In situ formed insulation products
• Current Stage: 5098 - Decision to abandon - Formal Approval
• Completion Date: 02-Sep-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: kSIST FprEN 14063-1:2018 - Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation

Relations

• Revises: EN 14063-1:2004 - Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14063-1:2016
01-oktober-2016
Toplotnoizolacijski materiali in proizvodi - Proizvodi iz ekspandiranega glinenega
agregatnega proizvoda (LWA), oblikovani na mestu vgradnje - 1. del: Specifikacija
za vezane in razsute proizvode pred vgradnjo
Thermal insulation products for buildings - In-situ formed expanded clay lightweight
aggregate products - Part 1: Specification for the loose-fill products before installation
Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte
Wärmedämmung aus Blähton-Leichtzuschlagsstoffen - Teil 1: Spezifikation für die
Schüttdämmstoffe vor dem Einbau
Produits isolants thermiques destinés aux applications du bâtiment - Isolation thermique
formée en place à base de granulats légers d’argile expansée - Partie 1 : Spécification
des produits en vrac avant la mise en œuvre
Ta slovenski standard je istoveten z: prEN 14063-1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN 14063-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14063-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN 14063-1:2016


DRAFT
EUROPEAN STANDARD
prEN 14063-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2016
ICS 91.100.60 Will supersede EN 14063-1:2004
English Version

Thermal insulation products for buildings - In-situ formed
expanded clay lightweight aggregate products - Part 1:
Specification for the loose-fill products before installation
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für Gebäude - An der
Isolation thermique formée en place à base de Verwendungsstelle hergestellte Wärmedämmung aus
granulats légers d'argile expansée - Partie 1 : Blähton-Leichtzuschlagsstoffen - Teil 1: Spezifikation
Spécification des produits en vrac avant la mise en für die Schüttdämmstoffe vor dem Einbau
oeuvre
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 88.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14063-1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14063-1:2016
prEN 14063-1:2016 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols, units and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Symbols, units and abbreviated terms . 6
4 Product characteristics .
...