Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates and digests - Analysis by inductively coupled plasma mass spectrometry (ICP-MS)

This document specifies the method for the determination of major, minor and trace elements in eluates and in aqua regia and nitric acid digests of construction products by inductively coupled plasma mass spectrometry (ICP-MS). It refers to the following 67 elements:
aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rubidium (Rb), rhenium (Re), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulphur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
NOTE 1   Construction products include e.g. mineral-based products (S); bituminous products (B); metals (M); wood-based products (W); plastics and rubbers (P); sealants and adhesives (A); paints and coatings (C), see also CEN/TR 16045.
The working range depends on the matrix and the interferences encountered.
NOTE 2   The limit of detection of most elements will be affected by their natural abundance, ionization behaviour, on abundance of isotope(s) free from isobaric interferences and by contamination (e.g. handling and airborne). Handling contaminations are in many cases more important than airborne ones.
The limit of detection (MDL) will be higher in cases where the determination is likely to be interfered (see Clause 6) or in case of memory effects (see e.g. EN ISO 17294-1).
The method in this document is applicable to construction products and validated for the product types listed in Annex A (informative).

Bauprodukte: Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von anorganischen Stoffen in Aufschlusslösungen und Eluaten - Analyse mittels Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP‑MS)

Dieses Dokument legt Analyseverfahren für die Bestimmung von Haupt-, Neben- und Spurenelementen in Eluaten und in Königswasser- und Salpetersäureaufschlusslösungen von Bauprodukten durch Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP-MS) fest. Es bezieht sich auf die folgenden 67 Elemente:
Aluminium (Al), Antimon (Sb), Arsen (As), Barium (Ba), Beryllium (Be), Bismut (Bi), Blei (Pb), Bor (B), Cadmium (Cd), Calcium (Ca), Cäsium (Cs), Cer (Ce), Chrom (Cr), Cobalt (Co), Dysprosium (Dy), Eisen (Fe), Erbium (Er), Europium (Eu), Gadolinium (Gd), Gallium (Ga), Germanium (Ge), Gold (Au), Hafnium (Hf), Holmium (Ho), Indium (In), Iridium (Ir), Kalium (K), Kupfer (Cu), Lanthan (La), Lithium (Li), Lutetium (Lu), Magnesium (Mg), Mangan (Mn), Molybdän (Mo), Natrium (Na), Neodym (Nd), Nickel (Ni), Palladium (Pd), Phosphor (P), Platin (Pt), Praseodym (Pr), Quecksilber (Hg), Rhenium (Re), Rhodium (Rh), Rubidium (Rb), Ruthenium (Ru), Samarium (Sm), Scandium (Sc), Schwefel (S), Selen (Se), Silber (Ag), Silicium (Si), Strontium (Sr), Tellur (Te), Terbium (Tb), Thallium (Tl), Thorium (Th), Thulium (Tm), Titan (Ti), Uran (U), Vanadium (V), Wolfram (W), Ytterbium (Yb), Yttrium (Y), Zink (Zn), Zinn (Sn) und Zirconium (Zr).
ANMERKUNG 1   Bauprodukte umfassen z. B. mineralische Produkte (S), bituminöse Produkte (B), Metalle (M), Holzprodukte (W), Kunststoffe und Gummi (P), Dichtstoffe und Kleber (A), Farben und Beschichtungen (C), siehe auch CEN/TR 16045.
Der Arbeitsbereich hängt von der Matrix und den zu erwartenden Interferenzen ab.
ANMERKUNG 2   Die Nachweisgrenze der meisten Elemente wird durch deren natürliche Häufigkeit, Ionisationsverhalten, Häufigkeit von Isotop(en), die frei von isobaren Interferenzen sind, und durch Kontamination (z. B. durch Handhabung und Luftübertragung) beeinflusst. Handhabungsbedingte Kontaminationen sind in den meisten Fällen von größerer Bedeutung als luftgetragene Kontaminationen.
Die Nachweisgrenze (MDL) wird höher ausfallen, wenn bei der Bestimmung Interferenzen möglich sind (siehe Abschnitt 6) oder Memoryeffekte auftreten (siehe z. B. EN ISO 17294 1).
Die in diesem Dokument beschriebenen Verfahren sind für Bauprodukte geeignet und sind für die in Anhang A (informativ) aufgeführten Produkttypen validiert.

Produits de construction : Évaluation de l'émission de substances dangereuses - Analyse des substances inorganiques dans les digestats et les éluats - Analyse par spectrométrie de masse avec plasma à couplage inductif (ICP-MS)

Le présent document spécifie la méthode de détermination des éléments majeurs, mineurs et des éléments traces dans les éluats et dans les digestats d'eau régale et d'acide nitrique de produits de construction par spectrométrie de masse avec plasma à couplage inductif (ICP-MS). Il fait référence aux 67 éléments suivants :
aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), béryllium (Be), bismuth (Bi), bore (B), cadmium (Cd), calcium (Ca), cérium (Ce), césium (Cs), chrome (Cr), cobalt (Co), cuivre (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), or (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), fer (Fe), lanthane (La), plomb (Pb), lithium (Li), lutécium (Lu), magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène (Mo), néodyme (Nd), nickel (Ni), palladium (Pd), phosphore (P), platine (Pt), potassium (K), praséodyme (Pr), rubidium (Rb), rhénium (Re), rhodium (Rh), ruthénium (Ru), samarium (Sm), scandium (Sc), sélénium (Se), silicium (si), argent (Ag), sodium (Na), strontium (Sr), soufre (S), tellure (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), étain (Sn), titane (Ti), tungstène (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn) et zirconium (Zr).
NOTE 1 Les produits de construction comprennent par exemple les produits à base de minéraux (S) ; les produits bitumineux (B) ; les métaux (M) ; les produits à base de bois (W) ; les plastiques et les caoutchoucs (P) ; les produits d'étanchéité et les adhésifs (A) ; les peintures et les revêtements (C), voir également le CEN/TR 16045.
L'étendue de mesure dépend de la matrice et des interférences rencontrées.
NOTE 2 La limite de détection de la plupart des éléments sera affectée par leur abondance naturelle, leur comportement d'ionisation, l'abondance du ou des isotopes exempts d'interférences isobariques et par la contamination (par exemple, par manipulation et par voie aérienne). Les contaminations dues à la manipulation sont dans de nombreux cas plus importantes que celles dues à l'air.
La limite de détection (LDM) est plus élevée lorsque la détermination est sujette à des interférences (voir l'Article 6) ou en cas d'effets mémoire (voir par exemple l'EN ISO 17294-1).
La méthode présentée dans le présent document est applicable aux produits de construction et validée pour les types de produits énumérés à l'Annexe A (informative).

Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza anorganskih snovi po razklopu in v izlužkih - Analiza z masno spektrometrijo z induktivno sklopljeno plazmo (ICP-MS)

Ta evropski standard opisuje metodo za določanje glavnih in stranskih elementov ter elementov v sledovih v zlatotopki in izvlečku dušikove kisline ter v izlužkih gradbenih proizvodov z masno spektrometrijo z induktivno sklopljeno plazmo (ICP‐ MS). Sklicuje se na naslednjih 67 elementov:
aluminij (Al), antimon (Sb), arzen (As), barij (Ba), berilij (Be), bizmut (Bi), bor (B), kadmij (Cd), kalcij (Ca), cerij (Ce), cezij (Cs), krom (Cr), kobalt (Co), baker (Cu), disprozij (Dy), erbij (Er), evropij (Eu), gadolinij (Gd), galij (Ga), germanij (Ge), zlato (Au), hafnij (Hf), holmij (Ho), indij (In), iridij (Ir), železo (Fe), lantan (La), svinec (Pb), litij (Li), lutecij (Lu), magnezij (Mg), mangan (Mn), živo srebro (Hg), molibden (Mo), neodim (Nd), nikelj (Ni), paladij (Pd), fosfor (P), platina (Pt), kalij (K), prazeodim (Pr), rubidij (Rb), renij (Re), rodij (Rh), rutenij (Ru), samarij (Sm), skandij (Sc), selen (Se), silicij (Si), srebro (Ag), natrij (Na), stroncij (Sr), žveplo (S), telurij (Te), terbij (Tb), talij (Tl), torij (Th), tulij (Tm), kositer (Sn), titan (Ti), volfram (W), uran (U), vanadij (V), iterbij (Yb), itrij (Y), cink (Zn) in cirkonij (Zr).
OPOMBA 1: Gradbeni proizvodi vključujejo npr. mineralne proizvode (S); bitumenske proizvode (B); kovine (M); lesne proizvode (W); plastične mase in gume (P); tesnila in lepila (A); barve in premaze (C), glej tudi CEN/TR 16045.
Delovni razpon je odvisen od matrice in motenj, ki se pojavijo.
OPOMBA 2: Na mejo zaznavanja za večino elementov bo vplival njihov delež v naravi, obnašanje ionizacije ali delež izotopov brez izobaričnih interferenc ter onesnaženje (npr. pri ravnanju, v zraku). Onesnaženja pri ravnanju so v veliko primerih pomembnejša od onesnaženja v zraku.
Meja zaznavanja bo višja v primerih, ko obstaja možnost motnje določevanja (glej točko 4) ali v primeru spominskih učinkov (glej npr. EN ISO 17294-1:2006, 8.2).
Ta metoda v tem standardu se uporablja za gradbene proizvode in je potrjena za vrste proizvodov, navedene v dodatku B.

General Information

Status
Published
Publication Date
21-Nov-2023
Withdrawal Date
03-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Nov-2023
Due Date
11-Aug-2022
Completion Date
22-Nov-2023

Relations

Buy Standard

Standard
EN 17200:2024
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2024
Nadomešča:
SIST-TS CEN/TS 17200:2019+AC:2019
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Analiza
anorganskih snovi po razklopu in v izlužkih - Analiza z masno spektrometrijo z
induktivno sklopljeno plazmo (ICP-MS)
Construction products - Assessment of release of dangerous substances - Analysis of
inorganic substances in eluates and digests - Analysis by inductively coupled plasma
mass spectrometry (ICP-MS)
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Analyse von
anorganischen Stoffen in Aufschlusslösungen und Eluaten - Analyse mit induktiv
gekoppeltem Plasma - Massenspektrometrie (ICP-MS)
Produits de construction : Évaluation de l'émission de substances dangereuses -
Analyse des substances inorganiques dans les digestats et les éluats - Analyse par
spectrométrie de masse avec plasma à couplage inductif (ICP-MS)
Ta slovenski standard je istoveten z: EN 17200:2023
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17200
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.100.01 Supersedes CEN/TS 17200:2018+AC:2018
English Version
Construction products: Assessment of release of
dangerous substances - Analysis of inorganic substances in
eluates and digests - Analysis by inductively coupled
plasma mass spectrometry (ICP-MS)
Produits de construction : Évaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Analyse des substances gefährlichen Stoffen - Analyse von anorganischen
inorganiques dans les digestats et les éluats - Analyse Stoffen in Aufschlusslösungen und Eluaten - Analyse
par spectrométrie de masse avec plasma à couplage mit induktiv gekoppeltem Plasma -
inductif (ICP-MS) Massenspektrometrie (ICP-MS)
This European Standard was approved by CEN on 14 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17200:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Abbreviations . 8
5 Principle . 9
6 Interferences . 9
6.1 General . 9
6.2 Spectral interferences . 9
6.2.1 Isobaric elemental interferences . 9
6.2.2 Isobaric molecular and doubly charged ion interferences . 9
6.3 Non-spectral interferences .10
7 Reagents .10
8 Apparatus .13
9 Procedure.14
9.1 Test sample .14
9.2 Test portion .14
9.3 Instrument set up .14
9.4 Calibration .15
9.4.1 Calibration function .15
9.4.2 Standard addition calibration .15
9.4.3 Determination of correction factors .15
9.4.4 Variable isotope ratio .15
9.5 Sample measurement .15
10 Calculation .16
10.1 Calculation for digests of construction products .16
10.2 Calculation for eluates of construction products .16
11 Expression of results .16
12 Performance characteristics .16
12.1 General .16
12.2 Blank .17
12.3 Calibration check .17
12.4 Internal standard response .17
12.5 Interference .17
12.6 Recovery .17
12.7 Indicative values for MDL .17
13 Test performance .17
14 Test report .18
Annex A (informative) Validation results for analysis of inorganic substances in eluates
and digests from construction products . 20
A.1 General . 20
A.2 Precision data for analysis of eluates from construction products . 20
A.3 Precision data for analysis of aqua regia digests from construction products . 27
Annex B (informative) Indicative values for MDL . 34
Bibliography . 35

European foreword
This document (EN 17200:2023) has been prepared by Technical Committee CEN/TC 351 “Construction
products: Assessment of release of dangerous substances”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 17200:2018+AC:2018.
In comparison with the previous edition, the following technical modifications have been made:
— the addition of performance data and data from intercomparison validation;
— alignment of terms and definitions within the working groups of CEN/TC 351, i.e. through the revised
version of EN 16687.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Following an extended evaluation of available methods for content and eluate analysis in construction
products (CEN/TR 16045) it was concluded that multi element analysis methods have preference over
methods developed for single elements or small groups of elements. This implies that for inorganic
substances ICP methods are preferred for the analysis of extracts obtained from digestion or eluates
obtained from leaching.
This standard has been adopted from the work carried out in the context of CEN/TC 400 (project
HORIZONTAL) and is very similar to EN 16171.
The outcome of the analysis of materials that due to considerations of reuse/recycling could fall under
an evaluation as construction products would be considered to fall within the uncertainties as specified
by the respective methods and as such would not require an additional analysis, thus avoiding double
testing.
NOTE 1 A similar method has been validated for the determination of elements in aqua regia digests
(EN ISO 54321) for the following matrices: municipal sludge, industrial sludge, sludge from electronic industry, ink
waste sludge, sewage sludge, biowaste, compost, composted sludge, agricultural soil, sludge amended soil, waste,
city waste incineration fly ash (“oxidised” matrix), city waste incineration bottom ash (“silicate” matrix), ink waste
sludge (organic matrix), electronic industry sludge (“metallic” matrix), sewage sludge (BCR 146R), city waste
incineration ash (BCR 176).
NOTE 2 A similar method has been validated for the determination of elements in hydrochloric (HCl), nitric
(HNO ) and tetrafluoroboric (HBF ) or hydrofluoric (HF) acid mixture digests (EN 13656) for the following
3 4
matrices: city waste incineration ash (BCR176/BCR176R), ink waste sludge (organic matrix), electronic industry
sludge (“metallic” matrix), sediment, coal fly ash, steel slag, copper slag, city waste incineration fly ash (“oxidised”
matrix), city waste incineration bottom ash (“silicate” matrix), sewage sludge (BCR 146R).
This document is part of a modular horizontal approach which was adopted in CEN/TC 351. “Horizontal”
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.