EN ISO 18113-5:2009
(Main)In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
ISO 18113-5:2009 specifies requirements for information supplied by the manufacturer of in vitro diagnostic (IVD) instruments for self-testing.
ISO 18113-5:2009 also applies to apparatus and equipment intended to be used with IVD instruments for self-testing.
ISO 18113-5:2009 can also be applied to accessories.
In-vitro-Diagnostika - Bereitstellung von Informationen durch den Hersteller - Teil 5: Geräte für in-vitro-diagnostische Untersuchungen zur Eigenanwendung (ISO 18113-5:2009)
Der vorliegende Teil von ISO 18113 legt Anforderungen an die Bereitstellung von Informationen durch den Hersteller von Geräten für in vitro diagnostische Untersuchungen zur Eigenanwendung fest.
Dieser Teil von ISO 18113 gilt auch für Geräte und Ausrüstungen, die für den Gebrauch von Geräten für in vitro diagnostische Untersuchungen zur Eigenanwendung vorgesehen sind.
Dieser Teil von ISO 18113 kann auch auf Zubehör angewendet werden.
Der vorliegende Teil von ISO 18113 gilt nicht für:
a) Anweisungen für die Geräteinstandhaltung oder reparatur;
b) IVD Reagenzien, einschließlich Kalibriermittel und Kontrollmaterialien zur Kontrolle des Reagenz; oder
c) IVD Instrumente zum Gebrauch durch Fachpersonal.
Dispositifs médicaux de diagnostic in vitro - Informations fournies par le fabricant (étiquetage) - Partie 5: Instruments de diagnostic in vitro pour auto-tests (ISO 18113-5:2009)
L'ISO 18113-5:2009 spécifie les exigences relatives aux informations fournies par le fabricant d'instruments de DIV pour auto-tests.
L'ISO 18113-5:2009 s'applique aussi aux appareillages et aux équipements destinés à être utilisés avec les instruments de DIV pour auto-tests.
L'ISO 18113-5:2009 peut aussi s'appliquer aux accessoires, le cas échéant.
Diagnostični preskusni sistemi in vitro - Informacije proizvajalca (označevanje) - 5. del: Diagnostični instrumenti in vitro za samopreskušanje (ISO 18113-5:2009)
Ta del ISO 18113 določa zahteve za informacije proizvajalca diagnostičnih instrumentov in vitro za samopreskušanje. Ta del ISO 18113 velja tudi za aparate in opremo, ki se uporabljajo z diagnostičnimi instrumenti in vitro za samopreskušanje. Ta del ISO 18113 lahko velja tudi za dodatno opremo. Ta del ISO 18113 ne velja za a) navodila za servisiranje ali popravilo instrumentov, b) diagnostične reagente in vitro, vključno s kalibratorji in kontrolnimi materiali, ki se uporabljajo pri nadzoru reagenta, c) diagnostične instrumente in vitro za poklicno uporabo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.In-vitro-Diagnostika - Bereitstellung von Informationen durch den Hersteller - Teil 5: Geräte für in-vitro-diagnostische Untersuchungen zur Eigenanwendung (ISO 18113-5:2009)Dispositifs médicaux de diagnostic in vitro - Informations fournies par le fabricant (étiquetage) - Partie 5: Instruments de diagnostic in vitro pour auto-tests (ISO 18113-5:2009)In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)11.100.10In vitro diagnostic test systemsICS:Ta slovenski standard je istoveten z:EN ISO 18113-5:2009SIST EN ISO 18113-5:2010en01-marec-2010SIST EN ISO 18113-5:2010SLOVENSKI
STANDARDSIST EN 592:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 18113-5
December 2009 ICS 11.100.10 Supersedes EN 592:2002English Version
In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)
Dispositifs médicaux de diagnostic in vitro - Informations fournies par le fabricant (étiquetage) - Partie 5: Instruments de diagnostic in vitro pour auto-tests (ISO 18113-5:2009)
In-vitro-Diagnostika - Bereitstellung von Informationen durch den Hersteller - Teil 5: Geräte für in-vitro-diagnostische Untersuchungen zur Eigenanwendung (ISO 18113-5:2009) This European Standard was approved by CEN on 18 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 18113-5:2009: ESIST EN ISO 18113-5:2010
Relationship between this European Standard and the Essential Requirements of the EU Directive 98/79/EC on “in vitro Diagnostic Medical Devices” .4 SIST EN ISO 18113-5:2010
Relationship between this European Standard and the Essential Requirements of the EU Directive 98/79/EC on “in vitro Diagnostic Medical Devices” This European Standard has been prepared under a mandate given to CEN by the European Commission to provide a means of conforming to the Essential Requirements of the New Approach Directive 98/79/EC on “in vitro Diagnostic Medical Devices”.
Once this European Standard is cited in the Official Journal of the European Union under that Directive and has been implemented as national standard in at least one Member State, compliance with the clauses of this standard given in Table ZA confers, within the limits of the scope of this International Standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA — Correspondence between this European Standard and European Directive 98/79/EC
Clause(s)/subclause(s) of this International Standard Essential Requirements (ERs) of Directive 98/79/EC Qualifying remarks/Notes 4 B.8.1, B.8.2
5.1 B.8.2
5.2.1 B.8.4 (b)
5.2.2 B.8.4 (d)
5.2.3 B.8.4 (g)
6 B.8.1
7.1 B.8.7 (a) See Notes 1 and 2 7.2.1 B.8.7 (a) See Note 2 7.2.2 B.8.7 (e)
7.3 B.7, B.8.5
7.4 B.8.7 (a) See Note 2 7.5 B.8.7 (a), B.8.7 (q), B.8.7(r), B.8.7 (s) See Note 2 7.6 B.8.7 (m), B.8.7 (n)
7.7 B.8.7 (h), B.8.7 (t)
7.8 B.8.7 (d)
7.10 B.8.7 (e), B.8.7 (f), B.8.7 (m), B.8.7 (n), B.8.7 (o)
7.11 B.7, B.8.7 (a), B.8.7 (g), B.8.7 (h) See Note 2 7.12 B.7.2, B.8.7 (k), B.8.7 (t)
7.13 B.8.7 (t)
7.14 B.8.7 (g), B.8.7 (k), B.8.7 (t)
7.15 B.8.7 (g)
7.16 B.8.7 (n), B.8.7 (s)
7.17 B.8.7 (n), B.8.7 (q)
7.18 B.8.7 (j), B.8.7 (t)
7.19 B.8.7 (t)
GENERAL NOTE The presumption of conformity depends on applying all relevant requirements of ISO 18113-1.
NOTE 1 In the European Union, the name and address of the manufacturer’s “EC Authorized representative” is required on the outer container label or in the instructions for use, if the legal manufacturer is not located within the European Union.
NOTE 2 Essential requirement B.8.7 of Directive 98/79/EC should be consulted for a comprehensive list of the information required.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this International Standard.
Reference numberISO 18113-5:2009(E)© ISO 2009
INTERNATIONAL STANDARD ISO18113-5First edition2009-12-15In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 5: In vitro diagnostic instruments for self-testing Dispositifs médicaux de diagnostic in vitro — Informations fournies par le fabricant (étiquetage) — Partie 5: Instruments de diagnostic in vitro pour auto-tests SIST EN ISO 18113-5:2010
ISO 18113-5:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 18113-5:2009(E) © ISO 2009 – All rights reserved iii Contents Page Foreword.iv Introduction.v 1 Scope.1 2 Normative references.1 3 Terms and definitions.2 4 Essential requirements.2 5 Labels and marking.2 5.1 General.2 5.2 Identification of the IVD instrument.2 6 Elements of the instructions for use.3 7 Content of the instructions for use.3 7.1 Manufacturer.3 7.2 Identification of the IVD instrument.3 7.3 Intended use.4 7.4 Storage and handling.4 7.5 Warnings and precautions.4 7.6 Instrument installation.4 7.7 Principles of measurement.5 7.8 Performance of the IVD instrument.5 7.9 Limitations of use.5 7.10 Preparation prior to operation.5 7.11 Operating procedure.5 7.12 Control procedure.6 7.13 Reading of examination results.6 7.14 Special functions.6 7.15 Shut-down procedure.6 7.16 Disposal information.6 7.17 Maintenance.7 7.18 Troubleshooting.7 7.19 Follow-up action.7 Bibliography.8
ISO 18113-5:2009(E) iv © ISO 2009 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.