EN ISO 4892-2:2006/A1:2009
(Amendment)Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1 (ISO 4892-2:2006/Amd 1:2009)
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1 (ISO 4892-2:2006/Amd 1:2009)
Amandma A1:2009 je dodatek k standardu SIST EN ISO 4892-2:2006
This part of ISO 4892 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass. The specimens are exposed to filtered xenon-arc light under controlled conditions (temperature, humidity and/or wetting). Various types of xenon-arc light source and various filter combinations may be used to meet different requirements. Specimen preparation and evaluation of the results are covered in other International Standards for specific materials. General guidance is given in ISO 4892-1.
Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2: Xenonbogenlampen - Änderung 1 (ISO 4892-2:2006/Amd 1:2009)
Dieser Teil von EN ISO 4892 legt die Verfahren fest, bei denen Probekörper in einem Gerät einer Xenonbogenstrahlung,
Wärme und Wasser ausgesetzt werden, um die Bewitterungseffekte nachzubilden, die
auftreten, wenn Werkstoffe in realen, im Endgebrauch vorhandenen Umgebungen der Globalstrahlung oder
Globalstrahlung hinter Fensterglas ausgesetzt sind.
Die Probekörper werden bei geregelten Umgebungsbedingungen (Temperatur, Luftfeuchte und/oder
Benässung) gefilterter Xenonlampenstrahlung ausgesetzt. Um verschiedene Anforderungen zu erfüllen,
können unterschiedliche Typen Xenonbogenlampen und unterschiedliche Filterkombinationen verwendet
werden.
Die Vorbereitung der Probekörper und die Auswertung der Ergebnisse werden in anderen, für bestimmte
Werkstoffe vorgesehenen Internationalen Normen behandelt.
Eine allgemeine Anleitung ist in ISO 4892-1 gegeben.
ANMERKUNG Die Beanspruchung von Beschichtungsstoffen durch Xenonbogenstrahlung ist in ISO 11341 [2]
beschrieben.
Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 2: Lampes à arc au xénon - Amendement 1 (ISO 4892-2:2006/Amd 1:2009)
Polimerni materiali - Metode izpostavitve laboratorijskim virom svetlobe - 2. del: Ksenonske svetilke - Dopolnilo 1 (ISO 4892-2:2006/Amd 1:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2009
Polimerni materiali - Metode izpostavitve laboratorijskim virom svetlobe - 2. del:
Ksenonske svetilke - Dopolnilo 1 (ISO 4892-2:2006/Amd 1:2009)
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps -
Amendment 1 (ISO 4892-2:2006/Amd 1:2009)
Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2:
Xenonbogenlampen (ISO 4892-2:2006/Amd 1:2009)
Plastiques - Méthodes d'exposition a des sources lumineuses de laboratoire - Partie 2:
Lampes a arc au xénon - Amendement 1 (ISO 4892-2:2006/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 4892-2:2006/A1:2009
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 4892-2:2006/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 83.080.01
English Version
Plastics - Methods of exposure to laboratory light sources - Part
2: Xenon-arc lamps - Amendment 1 (ISO 4892-2:2006/Amd
1:2009)
Plastiques - Méthodes d'exposition à des sources Kunststoffe - Künstliches Bestrahlen oder Bewittern in
lumineuses de laboratoire - Partie 2: Lampes à arc au Geräten - Teil 2: Xenonbogenlampen (ISO 4892-
xénon - Amendement 1 (ISO 4892-2:2006/Amd 1:2009) 2:2006/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 4892-2:2006; it was approved by CEN on 17 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4892-2:2006/A1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This Amendment (EN ISO 4892-2:2006/A1:2009) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This Amendment to the European Standard EN ISO 4892:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and
conflicting national standards shall be withdrawn at the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 4892-2:2006/Amd 1:2009 has been approved by CEN as a EN ISO 4892-2:2006/A1:2009
without any modification.
INTERNATIONAL ISO
STANDARD 4892-2
Second edition
2006-02-01
AMENDMENT 1
2009-07-15
Plastics — Methods of exposure to
laboratory light sources —
Part 2:
Xenon-arc lamps
AMENDMENT 1
Plastiques — Méthodes d'exposition à des sources lumineuses de
laboratoire —
Partie 2: Lampes à arc au xénon
AMENDEMENT 1
Reference number
ISO 4892-2:2006/Amd.1:2009(E)
©
ISO 2009
ISO 4892-2:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED D
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.