EN ISO 9863-1:2005

Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005)

ISO 9863-1:2005 specifies a method for the determination of the thickness of geosynthetics at specified pressures and defines the pressure at which the nominal thickness is determined.
The test results are intended for identification purposes and for use in technical data sheets and/or as part of other test methods, e.g. tests of hydraulic properties.
The method is applicable to all geosynthetics.

Geokunststoffe - Bestimmung der Dicke unter festgelegten Drücken - Teil 1: Einzellagen (ISO 9863-1:2005)

Géosynthétiques - Détermination de l'épaisseur à des pressions spécifiées - Partie 1: Couches individuelles

L'ISO 9863-1:2005 spécifie une méthode permettant de déterminer l'épaisseur des géosynthétiques à des pressions spécifiées et définit la pression à laquelle l'épaisseur nominale est déterminée.
Les résultats d'essai sont prévus à des fins d'identification et utilisés pour les fichiers techniques et/ou comme éléments d'autres méthodes d'essai, par exemple les essais des propriétés hydrauliques.
Cette méthode est applicable à tous les géosynthétiques.

Geosintetika - Ugotavljanje debeline pri predpisanih tlakih - 1. del: Enojne plasti (ISO 9863-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Feb-2005
• Withdrawal Date: 09-Aug-2016
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 2 - Terminology, identification, sampling and classification
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Aug-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 9863-1:2005 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005)

Relations

• Replaces: EN 964-1:1995 - Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: Single layers
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 9863-1:2016 - Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016)
• Effective Date: 17-Aug-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9863-1:2005
01-maj-2005
1DGRPHãþD
SIST EN 964-1:1999
Geosintetika - Ugotavljanje debeline pri predpisanih tlakih - 1. del: Enojne plasti
(ISO 9863-1:2005)
Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
(ISO 9863-1:2005)
Geokunststoffe - Bestimmung der Dicke unter festgelegten Drücken - Teil 1: Einzellagen
(ISO 9863-1:2005)
Géosynthétiques - Détermination de l'épaisseur a des pressions spécifiées - Partie 1:
Couches individuelles
Ta slovenski standard je istoveten z: EN ISO 9863-1:2005
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 9863-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9863-1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 9863-1:2005
EUROPEAN STANDARD
EN ISO 9863-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 59.080.70
English version
Geosynthetics - Determination of thickness at specified
pressures - Part 1: Single layers (ISO 9863-1:2005)
Géosynthétiques - Détermination de l'épaisseur à des Geokunststoffe - Bestimmung der Dicke unter festgelegten
pressions spécifiées - Partie 1: Couches individuelles (ISO Drücken - Teil 1: Einzellagen (ISO 9863-1:2005)
9863-1:2005)
This European Standard was approved by CEN on 15 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9863-1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9863-1:2005
EN ISO 9863-1:2005 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.4
5 Apparatus .5
6 Specimens .5
7 Procedure .5
7.1 General.5
7.2 Procedure A (New specimens for each pressure).6
7.3 Procedure B (Incremental loading of individual specimens).6
7.4 Procedure C (Polymeric and bituminous geosynthetic barriers of non-uniform thickness).6
8 Expression of results .6
9 Test report .
...