iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14908-6:2010

(Main)

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements

Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements

This European Standard provides mechanisms through which various vendors of building automation, control, and building management systems may exchange information in a standardised way.
This document provides specifications for the Application Elements of Control Network Protocol packets as follows:
-   definitions of standardized packet (network-variable) data types;
-   definitions of device-interface files;
-   definitions of standardized configuration-property types;
-   definitions of standardized enumeration types;
-   definitions of standardized functional profiles;
-   definition of the standardized method of file transfer between devices.
The purpose of this specification is to insure interoperability between various CNP implementations. This document contains all the information necessary to read and interpret the format of data and control information that is used by EN 14908-5. It also defines the device interface for a device as specified, which is necessary to exchange data between various devices from different manufacturers.

Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 6: Anwendungselemente

Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 6 : Éléments d'application

Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Protokol regulacijske mreže - 6. del: Uporaba elementov

Ta evropski standard podaja mehanizme, prek katerih različni prodajalci avtomatizacije stavb in izvršnih elementov ter pri upravljanju stavb lahko izmenjujejo informacije na standardiziran način. Ta dokument podaja specifikacije za izvršne elemente protokolnih paketov nadzornega omrežja: - definicije tipov podatkov standardiziranega paketa (omrežje-spremenljivka); definicije datotek naprava-vmesnik; - definicije standardiziranih tipov konfiguracija-lastnosti; definicije standardiziranih tipov preštevanja; definicije standardiziranih funkcionalnih profilov; definicije standardizirane metode prenosa datoteke med napravami. Namen te specifikacije je zagotoviti medobratovalnost med različnimi CNP implementacijami. Ta dokument vsebuje vse informacije, potrebne za branje in razlago formata podatkov in nadzornih informacij, uporabljenih v EN 14908-5. Prav tako opredeljuje vmesnik naprave za opredeljeno napravo, ki je potrebna za izmenjavo podatkov med različnimi napravami različnih proizvajalcev.

General Information

Status
Withdrawn
Publication Date
05-Oct-2010
Withdrawal Date
16-Dec-2014
ICS
35.240.67 - IT applications in building and construction industry
35.240.99 - IT applications in other fields
91.140.01 - Installations in buildings in general
97.120 - Automatic controls for household use
Technical Committee
CEN/TC 247 - Controls for mechanical building services
Drafting Committee
CEN/TC 247/WG 4 - Open System Data Transmission
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Dec-2014
Ref Project
SIST EN 14908-6:2011 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements

Relations

Replaced By
EN 14908-6:2014 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
Effective Date
08-Jun-2022

Buy Standard

EN 14908-6:2011EN 14908-6:2011
PreviousNext
Standard
EN 14908-6:2011
English language
574 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Protokol regulacijske mreže - 6. del: Uporaba elementovFirmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Gebäude Netzwerk Protokoll - Teil 6: AnwendungselementeRéseau ouvert de communication de données pour l'automatisation la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment - Partie 6: Eléments pour l'applicationOpen Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements97.120Avtomatske krmilne naprave za domAutomatic controls for household use35.240.99IT applications in other fieldsICS:Ta slovenski standard je istoveten z:EN 14908-6:2010SIST EN 14908-6:2011en01-februar-2011SIST EN 14908-6:2011SLOVENSKI
STANDARD



SIST EN 14908-6:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14908-6
October 2010 ICS 35.240.99; 91.140.01; 97.120 English Version
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Protocole de réseau pour le bâtiment -Partie 6 : Éléments d'application
Firmenneutrale Datenkommunikation für die Gebäudeautomation und Gebäudemanagement -Gebäude Netzwerk Protokoll - Teil 6: Anwendungselemente This European Standard was approved by CEN on 28 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14908-6:2010: ESIST EN 14908-6:2011



EN 14908-6:2010 (E) 2 Contents Page Foreword . 15Introduction . 161 Scope . 172 Normative references . 173 Terms and definitions . 174 Standard network-variable type – SNVT . 254.1 Introduction . 254.2 SNVT_amp . 254.3 SNVT_amp_mil . 254.4 SNVT_angle . 254.5 SNVT_angle_vel . 254.6 SNVT_btu_kilo . 264.7 SNVT_btu_mega .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-4:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
SIST EN 14908-4:2014

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.
The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specification that are specific to EN 14908-1.
Figure 1 shows a possible configuration of such CNP devices and networks connected to an IP network.
Figure 1 depicts two types of CNP devices: CNP nodes and CNP routers. It should be noted that the routers shown can route packets between typical CNP channels (such as twisted pair or power line) and an IP channel or it can route CNP packets between two IP channels. In this European Standard the IP channel will be defined in such a way to allow it to be used like any other CNP channel.
In the above diagram, the IP network can be considered to be one or more IP channels. This European Standard covers only how CNP packets are transported over IP channels. It does not cover how CNP packets are routed between standard CNP channels and IP channels. This specification is not intended to cover the lower layers (physical, MAC and link layers) of either standard CNP or IP channels.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-3:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
SIST EN 14908-3:2014

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this part of EN 14908 will prevail.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-2:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
SIST EN 14908-2:2014

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-5:2009(Main)
Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation
SIST EN 14908-5:2009

This specification contains all the information necessary to facilitate the exchange of data and control information in an interoperable fashion using EN 14908-1 and its associated data-transport media specifications.
This specification establishes a minimal set of rules for compliance. It does not rule-out extended services to be provided, given that the rules are adhered-to within the system. It is the intention of the standard to permit extended services to coexist and defines the bounds in which those services function, including the format for internal device-documentation of those services. Services outside purvey of this specification so long as they are adherents of the system are permitted but will not necessarily be interoperable with any other devices and shall not be essential for the functioning of the device.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this document, this document will prevail.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN ISO 16484-2(Main)
Building Automation and Control Systems (BACS) - Part 2: Hardware
oSIST prEN ISO 16484-2:2016

This European Standard specifies the requirements of hardware and functions for products and systems for the control and management of the HVAC processes (Building Control and Automation System BAC), and provides for the integration of non HVAC processes.

  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-1:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
SIST EN 14908-1:2014

This European Standard applies to a communication protocol for networked control systems in commercial Building Automation, Controls and Building Management. The protocol provides peer-to-peer communication for networked control and is suitable for implementing both peer-to-peer and master-slave control strategies. This specification describes services in layers 2 to 7. In the layer 2 (data link layer) specification, it also describes the MAC sub-layer interface to the physical layer. The physical layer provides a choice of transmission media. The interface described in this specification supports multiple transmission media at the physical layer. In the layer 7 specification, it includes a description of the types of messages used by applications to exchange application and network management data.

  • Standard
    415 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-4:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
SIST EN 14908-4:2014

This European Standard specifies the transporting of the Control Network Protocol (CNP) packets for commercial Building Automation, Controls and Building Management over Internet Protocol (IP) networks using a tunnelling mechanism wherein the CNP packets are encapsulated within IP packets. It applies to both CNP nodes and CNP routers.
The purpose of this European Standard is to ensure interoperability between various CNP devices that wish to use IP networks to communicate using the CNP protocol.
The main body of this European Standard is independent of the CNP protocol being transported over the IP network. The reader is directed to Annex A and Annex B for the normative and informative, respectively, aspects of this specification that are specific to EN 14908-1.
Figure 1 shows a possible configuration of such CNP devices and networks connected to an IP network.
Figure 1 depicts two types of CNP devices: CNP nodes and CNP routers. It should be noted that the routers shown can route packets between typical CNP channels (such as twisted pair or power line) and an IP channel or it can route CNP packets between two IP channels. In this European Standard the IP channel will be defined in such a way to allow it to be used like any other CNP channel.
In the above diagram, the IP network can be considered to be one or more IP channels. This European Standard covers only how CNP packets are transported over IP channels. It does not cover how CNP packets are routed between standard CNP channels and IP channels. This specification is not intended to cover the lower layers (physical, MAC and link layers) of either standard CNP or IP channels.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-3:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
SIST EN 14908-3:2014

This European Standard specifies all the information necessary to facilitate the exchange of data and control information over the power line medium for networked control systems in commercial Building Automation, Controls and Building Management.
This European Standard establishes a minimal set of rules for compliance. It does not rule out extended services to be provided, given that the rules are adhered to within the system. It is the intention of the standard to permit extended services (defined by users) to coexist.
Certain aspects of this standard are defined in other documents. These documents are referenced where relevant. In the case where a referenced standard conflicts with this European Standard, this part of EN 14908 will prevail.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14908-2:2014(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
SIST EN 14908-2:2014

This European Standard specifies the control network protocol (CNP) free-topology twisted-pair channel for networked control systems in commercial Building Automation, Controls and Building Management and is used in conjunction with EN 14908-1:2014. The channel supports communication at 78,125 kbit/s between multiple nodes, each of which consists of a transceiver, a protocol processor, an application processor, a power supply, and application electronics.
This European Standard covers the complete physical layer (OSI Layer 1), including the interface to the Media Access Control (MAC) sub-layer and the interface to the medium. Parameters that are controlled by other layers but control the operation of the physical layer are also specified.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day