Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter) ferromagnetischer Stahlrohre zum Nachweis von Unvollkommenheiten in Längs- und/oder Querrichtung - Änderung 2: Änderung der Zulässigkeitskriterien (ISO 10893-3:2011/Amd 2:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - Amendement 2: Changement des critères d'acceptation (ISO 10893-3:2011/Amd 2:2020)

Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih (razen obločno varjenih pod praškom), z avtomatizirano preiskavo z magnetno sondo - Dopolnilo A2: Sprememba meril sprejemljivosti (ISO 10893-3:2011/Amd 2:2020)

General Information

Status
Published
Publication Date
02-Jun-2020
Withdrawal Date
30-Dec-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Jun-2020
Completion Date
03-Jun-2020

Relations

Buy Standard

Amendment
EN ISO 10893-3:2011/A2:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 10893-3:2011/oprA2:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-3:2011/A2:2020
01-september-2020
Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih
napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih
(razen obločno varjenih pod praškom), z avtomatizirano preiskavo z magnetno
sondo - Dopolnilo A2: Sprememba meril sprejemljivosti (ISO 10893-3:2011/Amd
2:2020)
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage
testing of seamless and welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2:
Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
ferromagnetischer Stahlrohre zum Nachweis von Unvollkommenheiten in Längs-
und/oder Querrichtung - Änderung 2 (ISO 10893-3:2011/Amd 2:2020)
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite
sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections
longitudinales et/ou transversales - Amendement 2: Changement des critères
d'acceptatio: (ISO 10893-3:2011/Amd 2:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-3:2011/A2:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-3:2011/A2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-3:2011/A2:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-3:2011/A2:2020


EN ISO 10893-3:2011/A2
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 77.140.75; 77.040.20; 23.040.10
English Version

Non-destructive testing of steel tubes - Part 3: Automated
full peripheral flux leakage testing of seamless and welded
(except submerged arc-welded) ferromagnetic steel tubes
for the detection of longitudinal and/or transverse
imperfections - Amendment 2: Change acceptance criteria
(ISO 10893-3:2011/Amd 2:2020)
Essais non destructifs des tubes en acier - Partie 3: Zerstörungsfreie Prüfung von Stahlrohren - Teil 3:
Contrôle automatisé par flux de fuite sur toute la Automatisierte Streuflussprüfung nahtloser und
circonférence des tubes en acier ferromagnétique sans geschweißter (ausgenommen
soudure et soudés (sauf à l'arc immergé sous flux en unterpulvergeschweißter) ferromagnetischer
poudre) pour la détection des imperfections Stahlrohre zum Nachweis von Unvollkommenheiten in
longitudinales et/ou transversales - Amendement 2: Längs- und/oder Querrichtung - Änderung 2 (ISO
Changement des critères d'acceptation (ISO 10893- 10893-3:2011/Amd 2:2020)
3:2011/Amd 2:2020)
This amendment A2 modifies the European Standard EN ISO 10893-3:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-3:2011/A2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10893-3:2011/A2:2020
EN ISO 10893-3:2011/A2:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10893-3:2011/A2:2020
EN
...

SLOVENSKI STANDARD
SIST EN ISO 10893-3:2011/oprA2:2019
01-november-2019
Neporušitveno preskušanje jeklenih cevi - 3. del: Ugotavljanje prečnih/vzdolžnih
napak po celotnem obodu feromagnetnih jeklenih cevi, nevarjenih in varjenih
(razen obločno varjenih pod praškom), z avtomatizirano preiskavo z magnetno
sondo - Dopolnilo A2: Sprememba meril sprejemljivosti (ISO 10893-3:2011/DAM
2:2019)
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage
testing of seamless and welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2:
Change acceptance criteria (ISO 10893-3:2011/DAM 2:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 3: Automatisierte Streuflussprüfung
nahtloser und geschweißter (ausgenommen unterpulvergeschweißter)
ferromagnetischer Stahlrohre zum Nachweis von Unvollkommenheiten in Längs-
und/oder Querrichtung - Änderung 2 (ISO 10893-3:2011/DAM 2:2019)
Essais non destructifs des tubes en acier - Partie 3: Contrôle automatisé par flux de fuite
sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés
(sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections
longitudinales et/ou transversales - Amendement 2: Changement des critères
d'acceptatio: (ISO 10893-3:2011/DAM 2:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-3:2011/prA2
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
SIST EN ISO 10893-3:2011/oprA2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10893-3:2011/oprA2:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 10893-3:2011/oprA2:2019
DRAFT AMENDMENT
ISO 10893-3:2011/DAM 2
ISO/TC 17/SC 19 Secretariat: UNI
Voting begins on: Voting terminates on:
2019-08-27 2019-11-19
Non-destructive testing of steel tubes —
Part 3:
Automated full peripheral flux leakage testing of seamless
and welded (except submerged arc-welded) ferromagnetic
steel tubes for the detection of longitudinal and/or
transverse imperfections
AMENDMENT 2: Change acceptance criteria
Essais non destructifs des tubes en acier —
Partie 3: Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier
ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des
imperfections longitudinales et/ou transversales
AMENDEMENT 2: .
ICS: 77.140.75; 77.040.20; 23.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.