EN ISO 10893-6:2019

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)

This document specifies requirements for film-based radiographic X-ray testing of the longitudinal or helical weld seams of automated fusion arc-welded steel tubes for the detection of imperfections.
It can also be applicable to the testing of circular hollow sections.
NOTE       As an alternative, see ISO 10893-7 for digital radiographic testing.

Zerstörungsfreie Prüfung von Stahlrohren - Teil 6: Durchstrahlungsprüfung der Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten (ISO 10893-6:2019)

Essais non destructifs des tubes en acier - Partie 6: Contrôle radiographique du cordon de soudure des tubes en acier soudés pour la détection des imperfections (ISO 10893-6:2019)

Ce document spécifie les prescriptions relatives au contrôle radiographique sur film par rayons X des cordons de soudure longitudinaux ou hélicoïdaux des tubes en acier soudés en automatique par fusion à l'arc pour la détection des imperfections.
Ce document s'applique également au contrôle des profils creux circulaires.
NOTE       De manière alternative, le contrôle radiographique numérique est spécifié dans l'ISO 10893‑7.

Neporušitveno preskušanje jeklenih cevi - 6. del: Ugotavljanje napak varov pri jeklenih ceveh, obločno varjenih pod praškom, z radiografsko preiskavo (ISO 10893-6:2019)

Ta dokument določa zahteve za ugotavljanje napak vzdolžnih ali vijačnih varov pri avtomatsko talilno obločno varjenih jeklenih ceveh z radiografsko rentgensko preiskavo na podlagi filma.
Lahko se uporablja tudi za preskušanje krožnih votlih profilov.
OPOMBA: Za alternativne metode glej standard ISO 10893-7 za digitalno radiografsko preiskavo.

General Information

• Status: Published
• Publication Date: 12-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.040.20 - Non-destructive testing of metals
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Mar-2019
• Completion Date: 13-Mar-2019
• Ref Project: SIST EN ISO 10893-6:2019 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)

Relations

• Replaces: EN ISO 10893-6:2011 - Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)
• Effective Date: 30-Sep-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10893-6:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 10893-6:2011
1HSRUXãLWYHQRSUHVNXãDQMHMHNOHQLKFHYLGHO8JRWDYOMDQMHQDSDNYDURYSUL
MHNOHQLKFHYHKREORþQRYDUMHQLKSRGSUDãNRP]UDGLRJUDIVNRSUHLVNDYR,62

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of
welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 6: Durchstrahlungsprüfung der
Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten (ISO
10893-6:2019)
Essais non destructifs des tubes en acier - Partie 6: Contrôle radiographique du cordon
de soudure des tubes en acier soudés pour la détection des imperfections (ISO 10893-
6:2019)
Ta slovenski standard je istoveten z: EN ISO 10893-6:2019
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN ISO 10893-6:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10893-6:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 10893-6:2019


EN ISO 10893-6
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 23.040.10; 77.040.20; 77.140.75 Supersedes EN ISO 10893-6:2011
English Version

Non-destructive testing of steel tubes - Part 6:
Radiographic testing of the weld seam of welded steel
tubes for the detection of imperfections (ISO 10893-
6:2019)
Essais non destructifs des tubes en acier - Partie 6: Zerstörungsfreie Prüfung von Stahlrohren - Teil 6:
Contrôle radiographique du cordon de soudure des Durchstrahlungsprüfung der Schweißnaht
tubes en acier soudés pour la détection des geschweißter Stahlrohre zum Nachweis von
imperfections (ISO 10893-6:2019) Unvollkommenheiten (ISO 10893-6:2019)
This European Standard was approved by CEN on 29 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-6:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10893-6:2019
EN ISO 10893-6:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10893-6:2019
EN ISO 10893-6:2019 (E)
European foreword
This document (EN ISO 10893-6:2019) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and steel fittings” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10893-6:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin
...