iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 9453:2014

(Main)

Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)

Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)

ISO 9453:2014 specifies the requirements for chemical composition for soft solder alloys containing two or more of tin, lead, antimony, copper, silver, bismuth, zinc, indium and/or cadmium.

Weichlote - Chemische Zusammensetzung und Lieferformen (ISO 9453:2014)

Diese Internationale Norm legt die Anforderungen für die chemische Zusammensetzung für Weichlote die zwei oder mehr der folgenden Elemente enthalten fest:
- Zinn, Blei, Antimon, Kupfer, Silber, Bismut, Zink, Indium und/oder Cadmium;
Eine Angabe für allgemein erhältliche Lieferformen ist ebenfalls erfasst.

Alliages de brasage tendre - Compositions chimiques et formes (ISO 9453:2014)

L'ISO 9453:2014 spécifie les exigences relatives à la composition chimique d'alliages de brasage tendre contenant au moins deux éléments étain, plomb, antimoine, cuivre, argent, bismuth, zinc, indium et/ou cadmium.

Mehke spajke - Kemijska sestava in oblike (ISO 9453:2014)

Standard EN ISO 9453 določa zahteve glede kemijske sestave mehkih spajk, ki vsebujejo vsaj dva od naslednjih elementov: kositer, svinec, antimon, baker, srebro, bizmut, cink, indij in/ali kadmij. Vključena je tudi navedba oblik, ki so običajno na voljo.

General Information

Status
Withdrawn
Publication Date
05-Aug-2014
Withdrawal Date
06-Oct-2020
ICS
25.160.50 - Brazing and soldering
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121 - Welding
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
07-Oct-2020
Ref Project
SIST EN ISO 9453:2014 - Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)

Relations

Replaces
EN ISO 9453:2006 - Soft solder alloys - Chemical compositions and forms (ISO 9453:2006)
Effective Date
13-Aug-2014
Replaced By
EN ISO 9453:2020 - Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
Effective Date
14-Oct-2020

Buy Standard

EN ISO 9453:2014EN ISO 9453:2014
PreviousNext
Standard
EN ISO 9453:2014
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9453:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 9453:2007
Mehke spajke - Kemijska sestava in oblike (ISO 9453:2014)
Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)
Weichlote - Chemische Zusammensetzung und Lieferformen (ISO 9453:2014)
Alliages de brasage tendre - Compositions chimiques et formes (ISO 9453:2014)
Ta slovenski standard je istoveten z: EN ISO 9453:2014
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9453:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9453:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 9453:2014

EUROPEAN STANDARD
EN ISO 9453

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2014
ICS 25.160.50 Supersedes EN ISO 9453:2006
English Version
Soft solder alloys - Chemical compositions and forms (ISO
9453:2014)
Alliages de brasage tendre - Compositions chimiques et Weichlote - Chemische Zusammensetzung und
formes (ISO 9453:2014) Lieferformen (ISO 9453:2014)
This European Standard was approved by CEN on 10 July 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9453:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9453:2014
EN ISO 9453:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9453:2014
EN ISO 9453:2014 (E)
Foreword
This document (EN ISO 9453:2014) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2015, and conflicting national standards shall be withdrawn
at the latest by February 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9453:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9453:2014 has been approved by CEN as EN ISO 9453:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 9453:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 9453:2014
INTERNATIONAL ISO
STANDARD 9453
Third edition
2014-08-01
Soft solder alloys — Chemical
compositions and forms
Alliages de brasage tendre — Compositions chimiques et formes
Reference number
ISO 9453:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 9453:2014
ISO 9453:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9455-17:2024(Main)
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2024)
SIST EN ISO 9455-17:2024

This document specifies a method of testing for deleterious effects that can arise from flux residues after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes, as specified in ISO 9454-1, in solid or liquid form, or in the form of flux-cored solder wire, solder preforms or solder paste constituted with eutectic or near-eutectic tin/lead (Sn/Pb) or Sn95,5Ag3Cu0,5 or other lead-free solders as agreed between user and supplier (see ISO 9453).
This test method is also applicable to fluxes for use with lead-containing and lead-free solders. However, the soldering temperatures can be adjusted with agreement between tester and customer.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18279:2023(Main)
Brazing - Imperfections in brazed joints (ISO 18279:2023)
SIST EN ISO 18279:2024

This document details a classification of imperfections that can occur in brazing joints. In addition, guidance is provided on quality levels and suggested limits for imperfections are detailed.
For requirements not covered by this document, reference can be made to other sources, such as statutory regulations, codes of practice and technical delivery conditions.
No information is given on how imperfections are to be assessed in individual cases because this depends on the requirements for the particular brazed joint. These imperfections are not always detectable by the use of non-destructive testing alone.
This document covers only imperfections that can occur in connection with brazing without the effect of any additional service loads. Only the type, shape and position of such imperfections are covered; no indication is given of the conditions of occurrence or causes.
For requirements for brazed joints which are relevant and essential to the particular function of the component, reference can be made to the relevant documentation, for example manufacturing documents or procedure sheets.
It is important that these requirements be precisely prescribed and that conformity with them be verifiable. Conformity can be established by testing either the brazed assembly itself or a test piece produced under comparable conditions.
This document does not specify requirements for acceptance levels for imperfections, since these will differ very markedly depending on the application, but it does suggest some quality levels which can be of value in the absence of more detailed information.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5179:2023(Main)
Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)
SIST EN ISO 5179:2023

This document specifies three test methods for investigating brazeability.
A spreading test shows testing method with measurement of the spread area of the filler metals.
A T-joint test describes a scheme to construct a T-shape design by the test pieces and a testing method.
A varying gap test describes a test piece and a testing method for assessing the influence of the various parameters which can influence brazing during manufacture as a function of clearances.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-6:2022(Main)
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022)
SIST EN ISO 9455-6:2023

This document specifies three quantitative methods for the determination of the ionic halide (excluding fluoride) content of soldering fluxes. Halides are calculated as chlorides. A useful qualitative test method for the detection of ionic halides is also described.
Method A is a potentiometric titration method for the determination of halide (excluding fluoride) content and is applicable to flux classes 1 and 2, defined in ISO 9454-1. This method, which is considered the reference method for these fluxes, is suitable for halide contents generally within the range of 0,05 % mass fraction to 2 % mass fraction in the non-volatile matter of the flux.
Method B is a titration method for the determination of the total halide (excluding fluoride) content of water-soluble fluxes. It is applicable to flux classes 2122 to 2124, 3112 to 3114 and 3212 to 3214, as defined in ISO 9454-1.
Method C is a titration method for the determination of the halide (excluding fluoride) content of water-soluble fluxes containing phosphates and is applicable to flux class 331, as defined in ISO 9454-1.
Method D is a qualitative test, using silver chromate test paper, for the presence of ionic halides. The technique can be used for all classes of flux.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-1:2022(Main)
Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022)
SIST EN ISO 9455-1:2023

This document specifies a gravimetric method for the determination of the content of non-volatile matter in soft soldering fluxes. It is applicable to liquid and paste fluxes of type 1, as defined in ISO 9454-1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18496:2021(Main)
Brazing - Fluxes for brazing - Classification and technical delivery conditions (ISO 18496:2020)
SIST EN ISO 18496:2022

This document specifies the classification of fluxes used for brazing metals and characterizes these fluxes on the basis of their properties and use, and gives technical delivery conditions and health and safety precautions.
This document covers two classes of flux, FH and FL. Class FH is used for the brazing of heavy metals (steels, stainless steels, copper and its alloys, nickel and its alloys, precious metals, molybdenum and tungsten). Class FL is used for the brazing of aluminium and its alloys.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-9:2020(Main)
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:2020)
SIST EN ISO 9455-9:2020

This document specifies a distillation method for the determination of the ammonia content of solid, paste or liquid fluxes. The method is applicable to fluxes of class 311 and 321 only, as defined in ISO 9454‑1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9454-2:2020(Main)
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:2020)
SIST EN ISO 9454-2:2020

This document specifies the performance requirements for fluxes in solid, liquid and paste forms intended for use with soft solders.
NOTE 1    ISO 9454‑1 specifies the requirements for labelling and packaging as well as the coding system for the classification of the fluxes.
NOTE 2    Some of the fluxes intended for inert gas and vapour phase soldering may not pass some of the criteria in Tables 1 and 2.
Requirements for these fluxes are agreed between the purchaser and the supplier.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-5:2020(Main)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
SIST EN ISO 9455-5:2020

This document specifies a qualitative method for assessing the aggressiveness of a flux towards copper.
The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9453:2020(Main)
Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
SIST EN ISO 9453:2020

This document specifies the requirements for chemical composition for soft solder alloys containing two or more of: tin, lead, antimony, copper, silver, bismuth, zinc, indium and/or cadmium.
An indication of the forms generally available is also included.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day