Railway applications - Vehicle reference masses

This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles.
The reference masses defined in this document are as follows:
-   dead mass;
-   design mass in working order;
-   design mass under normal payload;
-   design mass under exceptional payload;
-   operational mass in working order;
-   operational mass under normal payload.
These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component.
The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard.
Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.

Bahnanwendungen - Fahrzeugreferenzmassen

Applications ferroviaires - Masses de référence des véhicules

Železniške naprave - Določitev mase železniškega vozila

General Information

Status
Not Published
Publication Date
01-Nov-2023
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
29-Sep-2022
Due Date
08-Sep-2022
Completion Date
29-Sep-2022

Relations

Buy Standard

Draft
EN 15663:2017+A1:2019/oprA2:2022
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15663:2017+A1:2019/oprA2:2022
01-september-2022
Železniške naprave - Določitev mase železniškega vozila
Railway applications - Vehicle reference masses
Bahnanwendungen - Fahrzeugreferenzmassen
Applications ferroviaires - Masses de référence des véhicules
Ta slovenski standard je istoveten z: EN 15663:2017+A1:2018/prA2:2022
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN en,fr,de
15663:2017+A1:2019/oprA2:2022
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15663:2017+A1:2019/oprA2:2022

---------------------- Page: 2 ----------------------
SIST EN 15663:2017+A1:2019/oprA2:2022


DRAFT
EUROPEAN STANDARD
EN 15663:2017+A1:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
July 2022
ICS 45.060.01
English Version

Railway applications - Vehicle reference masses
Applications ferroviaires - Masses de référence des Bahnanwendungen - Fahrzeugreferenzmassen
véhicules
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A2, if approved, will modify the European Standard EN 15663:2017+A1:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN
worldwide for CEN national Members. 15663:2017+A1:2018/prA2:2022:2022 E

---------------------- Page: 3 ----------------------
SIST EN 15663:2017+A1:2019/oprA2:2022
EN 15663:2017+A1:2018/prA2:2022 (E)
Contents Page

European foreword . 3
1 Modifications to Clause 2, Normative references . 4
2 Modifications to Clause 3, “Terms, definitions and abbreviations” . 4
3 Modifications to 3.2, “Abbreviations” . 5
4 Modifications to 4.1, “General” . 5
5 Modification to 4.3, “Dead mass” . 6
6 Modifications to 4.6, “Additional or alternative mass definitions and payload states”
. 6
7 Modification to Annex B, “Application standards” . 6
8 Modification to Annex C, “Application of EN 15663:2009 reference masses in TSI” . 6
9 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 2016/797/EC . 6
10 Modifications to Bibliography .10


2

---------------------- Page: 4 ----------------------
SIST EN 15663:2017+A1:2019/oprA2:2022
EN 15663:2017+A1:2018/prA2:2022 (E)
European foreword
This document (EN 15663:2017+A1:2018/prA2:2022) has been prepared by Technical Committee
CEN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.