EN ISO 17450-1:2011

Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)

ISO 17450-1:2011 provides a model for geometrical specification and verification and defines the corresponding concepts. It also explains the mathematical basis of the concepts associated with the model and defines general terms for geometrical features of workpieces.
ISO 17450-1:2011 defines the fundamental concepts for the GPS system in order to provide nonambiguous GPS language to be used in design, manufacturing and verification, to identify features, characteristics and rules to provide the basis for specifications, to provide a complete symbology language to indicate GPS specifications, to provide simplified symbology by defining default rules, and to provide consistent rules for verification.

Geometrische Produktspezifikation (GPS) - Grundlagen - Teil 1: Modell für die geometrische Spezifikation und Prüfung (ISO 17450-1:2011)

Dieser Teil von ISO 17450 stellt ein Modell für die geometrische Produktspezifikation und -prüfung zur
Verfügung und legt die entsprechenden Konzepte fest. Er beschreibt außerdem die mathematischen
Grundlagen der Konzepte, die dem Modell zugeordnet sind, und legt allgemeine Begriffe für geometrische
Elemente von Werkstücken fest.
Dieser Teil von ISO 17450 legt die Grundlagen für das GPS-System fest, um
- eine eindeutige GPS-Sprache zur Verwendung in der Konstruktion, Herstellung und Prüfung bereitzustellen,
- Geometrieelemente, Merkmale und Regeln als Grundlage für Spezifikationen festzulegen,
- eine vollständige Symbolsprache zur Angabe von GPS-Spezifikationen zur Verfügung zu stellen,
- eine vereinfachte Symbologie durch die Festlegung von Standardregeln bereitzustellen, und
- einheitliche Regeln für die Prüfung aufzustellen.

Spécification géométrique des produits (GPS) - Concepts généraux - Partie 1: Modèle pour la spécification et la vérification géométriques (ISO 17450-1:2011)

L'ISO 17450-1:2011 propose un modèle pour la spécification et la vérification géométriques, et elle définit les concepts correspondants. Elle fournit également une explication des bases mathématiques de ces concepts associés aux modèles et définit les termes généraux utilisés pour les éléments géométriques des pièces.
L'ISO 17450-1:2011 définit les concepts fondamentaux du système GPS, afin de fournir un langage GPS non ambigu, destiné à être utilisé par la conception, la fabrication et le contrôle; d'identifier correctement les éléments, les caractéristiques et les règles permettant de fournir le fondement des spécifications; de fournir une symbolique complète permettant d'indiquer les spécifications GPS; de proposer une symbolique simplifiée pour exprimer des règles par défaut; et de développer des règles cohérentes pour la vérification.

Specifikacija geometrijskih veličin izdelka - Osnove - 1. del: Model za geometrijsko specifikacijo in preverjenje (ISO 17450-1:2011)

Ta del standarda ISO 17450 določa model za geometrijsko specifikacijo in preverjanje ter določa ustrezne koncepte. Opisuje tudi matematično podlago za koncepte, povezane z modelom, in določa splošne pogoje za geometrijske lastnosti obdelovancev. Ta del standarda ISO 17450 določa temeljne koncepte za sistem specifikacije geometrijskih veličin izdelka (GPS); da se: – zagotovi jasen jezik specifikacije geometrijskih veličin izdelka, ki se uporabi pri zasnovi, izdelavi in preverjanju; – določijo lastnosti, značilnosti in pravila, ki predstavljajo podlago za specifikacije; – zagotovi popoln simbološki jezik za izražanje specifikacij GPS; – zagotovi poenostavljena simbologija z opredelitvijo privzetih pravil; in – določijo skladna pravila za preverjanje.

General Information

• Status: Published
• Publication Date: 14-Dec-2011
• Withdrawal Date: 29-Jun-2012
• ICS: 17.040.01 - Linear and angular measurements in general
• ICS: 17.040.30 - Measuring instruments
• ICS: 17.040.40 - Geometrical Product Specification (GPS)
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 17450-1:2012 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)

Relations

• Replaces: CEN ISO/TS 17450-1:2007 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005)
• Effective Date: 21-Dec-2011
• Replaces: CEN ISO/TS 17450-1:2007/AC:2008 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005/Cor 1:2007)
• Effective Date: 21-Dec-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17450-1:2012
01-marec-2012
1DGRPHãþD
SIST-TS CEN ISO/TS 17450-1:2008
SIST-TS CEN ISO/TS 17450-1:2008/AC:2008
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND2VQRYHGHO0RGHO]DJHRPHWULMVNR
VSHFLILNDFLMRLQSUHYHUMHQMH,62
Geometrical product specifications (GPS) - General concepts - Part 1: Model for
geometrical specification and verification (ISO 17450-1:2011)
Geometrische Produktspezifikation (GPS) - Grundlagen - Teil 1: Modell für die
geometrische Spezifikation und Prüfung (ISO 17450-1:2011)
Spécification géométrique des produits (GPS) - Concepts généraux - Partie 1: Modèle
pour la spécification et la vérification géométriques (ISO 17450-1:2011)
Ta slovenski standard je istoveten z: EN ISO 17450-1:2011
ICS:
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND*36 Specification (GPS)
SIST EN ISO 17450-1:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17450-1:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 17450-1:2012


EUROPEAN STANDARD
EN ISO 17450-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2011
ICS 17.040.01 Supersedes CEN ISO/TS 17450-1:2007
English Version
Geometrical product specifications (GPS) - General concepts -
Part 1: Model for geometrical specification and verification (ISO
17450-1:2011)
Spécification géométrique des produits (GPS) - Concepts Geometrische Produktspezifikation (GPS) - Grundlagen -
généraux - Partie 1: Modèle pour la spécification et la Teil 1: Modell für die geometrische Spezifikation und
vérification géométriques (ISO 17450-1:2011) Prüfung (ISO 17450-1:2011)
This European Standard was approved by CEN on 10 December 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17450-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17450-1:2012
EN ISO 17450-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17450-1:2012
EN ISO 17450-1:2011 (E)
Foreword
This document (EN ISO 17450-1:2011) has been prepared by Technical Committee ISO/TC 213 "Dimensional
and geometrical product specifications and verification" in collaboration with Technical Committee
CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 17450-1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17450-1:2011 has b
...