EN 622-5:2009
(Main)Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.
Faserplatten - Anforderungen - Teil 5: Anforderungen an Platten nach dem Trockenverfahren (MDF)
Diese Europäische Norm legt die Anforderungen an Platten nach dem Trockenverfahren (MDF) nach EN 316
fest.
Die in dieser Europäischen Norm angegebenen Werte beziehen sich auf Produkteigenschaften, es sind keine
charakteristischen Werte, die für konstruktive Berechnungen verwendet werden können1).
Panneaux de fibres - Exigences - Partie 5: Exigences pour panneaux obtenus par procédé à sec (MDF)
La présente norme européenne prescrit les exigences pour les panneaux obtenus par procédé à sec (MDF), tels que définis dans l’EN 316.
Les valeurs données dans la présente Norme Européenne concernent les caractéristiques du produit mais ne sont pas les valeurs caractéristiques à utiliser dans les calculs de conceptions. )
Vlaknene plošče - Specifikacije - 5. del: Zahteve za plošče, izdelane po suhem postopku (MDF)
Ta evropski standard določa zahteve za plošče, izdelane po suhem postopku (MDF), kot je opredeljeno v EN 316. Vrednosti, navedene v tem evropskem standardu, se nanašajo na lastnosti proizvodov, vendar niso značilne vrednosti, ki bi jih uporabili v izračunih pri načrtovanju.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserplatten - Anforderungen - Teil 5: Anforderungen an Platten nach dem Trockenverfahren (MDF)Panneaux de fibres - Exigences - Partie 5: Exigences pour panneaux obtenus par procédé à sec (MDF)Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)79.060.20Fibre and particle boardsICS:Ta slovenski standard je istoveten z:EN 622-5:2009SIST EN 622-5:2010en,fr,de01-april-2010SIST EN 622-5:2010SLOVENSKI
STANDARDSIST EN 622-5:20061DGRPHãþD
SIST EN 622-5:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 622-5
November 2009 ICS 79.060.20 Supersedes EN 622-5:2006English Version
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
Panneaux de fibres - Exigences - Partie 5 : Exigences pour panneaux obtenus par procédé à sec (MDF)
Faserplatten - Anforderungen - Teil 5: Anforderungen an Platten nach dem Trockenverfahren (MDF) This European Standard was approved by CEN on 3 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 622-5:2009: ESIST EN 622-5:2010
EN 622-5:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .5 4 Requirements .6 4.1 General .6 4.2 Requirements for non load-bearing boards, including boards for general purpose use .7 4.2.1 Requirements for boards for use in dry conditions .7 4.2.2 Requirements for boards for use in humid conditions.7 4.3 Requirements for load-bearing boards .8 4.3.1 Requirements for load-bearing boards for use in dry conditions .8 4.3.2 Requirements for load-bearing boards for use in humid conditions .8 4.4 Requirements for light MDF boards for non load-bearing applications, including general purpose boards .9 4.4.1 Requirements for boards for use in dry conditions .9 4.4.2 Requirements for boards for use in humid conditions. 10 4.5 Requirements for ultra-light MDF boards for non load-bearing applications, including general purpose boards . 10 4.6 Requirements for boards for use in rigid underlays in roofing and walls . 11 5 Verification of compliance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.