Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering

This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, lacquered or coextruded.
NOTE The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.

Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung der Beständigkeit gegenüber künstlicher Bewitterung

Dieses Dokument legt ein Verfahren zur Beanspruchung von Proben, die aus Profilen auf Basis von Polyvinylchlorid (PVC) hergestellt wurden, durch Xenonbogenstrahlung fest, mit dem Ziel, Veränderungen der Eigenschaften zu bewerten.
Es ist anwendbar auf Profile auf Basis von PVC, einschließlich folierter Profile und solcher, die lackiert oder koextrudiert sind.
ANMERKUNG   Die Bestimmung der Änderungen der Farbe und anderer Eigenschaften nach Beanspruchung von Profilen auf Basis von PVC durch Xenonbogenstrahlung ist in einem informativen Anhang A beschrieben.

Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la résistance au vieillissement artificiel

Le présent document spécifie une méthode permettant d’exposer des éprouvettes prélevées sur des profilés en poly(chlorure de vinyle) (PVC) au rayonnement d’une lampe à arc au xénon, dans le but d’évaluer les variations de leurs caractéristiques.
Il est applicable aux profilés à base de PVC, y compris ceux recouverts d’un film, laqués ou coextrudés.
NOTE La détermination des changements de couleur et des variations des propriétés après l’exposition des profilés à base de PVC au rayonnement d’une lampe à arc au xénon est décrite dans une Annexe A informative.

Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje odpornosti proti vremenskim vplivom s pospešenim staranjem

Ta dokument določa metodo izpostavitve preskušancev iz profilov na osnovi polivinilklorida (PVC) ksenonskemu obločnemu sevanju za ocenitev sprememb lastnosti.
Uporablja se za profile na osnovi polivinilklorida, vključno s tistimi, ki so prekriti s folijo, lakirani ali koekstrudirani.
OPOMBA: Določanje sprememb barve in različic lastnosti po izpostavitvi profilov na osnovi polivinilklorida (PVC) ksenonskemu obločnemu sevanju je opisano v informativnem dodatku A.

General Information

Status
Published
Publication Date
11-Dec-2018
Withdrawal Date
29-Jun-2019
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jan-2024
Completion Date
15-Jan-2024

Relations

Buy Standard

Standard
EN 513:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 513:2018
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 513:2019
01-marec-2019
1DGRPHãþD
SIST EN 513:2000
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje
odpornosti proti vremenskim vplivom s pospešenim staranjem
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to
artificial weathering
Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung der
Wetterechtheit und Wetterbeständigkeit durch künstliche Bewitterung
Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la
résistance au vieillissement artificiel
Ta slovenski standard je istoveten z: EN 513:2018
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
SIST EN 513:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 513:2019

---------------------- Page: 2 ----------------------

SIST EN 513:2019


EN 513
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 83.140.99 Supersedes EN 513:1999
English Version

Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the resistance to artificial weathering
Plastiques - Profilés à base de poly(chlorure de vinyle) Kunststoffe - Profile auf Basis von Polyvinylchlorid
(PVC) - Détermination de la résistance au (PVC) - Bestimmung der Wetterechtheit und
vieillissement artificiel Wetterbeständigkeit durch künstliche Bewitterung
This European Standard was approved by CEN on 26 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 513:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 513:2019
EN 513:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols and abbreviations . 5
5 Principle . 5
6 Apparatus . 5
7 Test specimens . 5
8 Conditioning . 6
9 Weathering test conditions . 6
10 Procedure. 7
11 Test report .
...

SLOVENSKI STANDARD
oSIST prEN 513:2018
01-februar-2018
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje
odpornosti proti vremenskim vplivom s pospešenim staranjem
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to
artificial weathering
Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung der
Wetterechtheit und Wetterbeständigkeit durch künstliche Bewitterung
Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination de la
résistance au vieillissement artificiel
Ta slovenski standard je istoveten z: prEN 513
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
oSIST prEN 513:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 513:2018

---------------------- Page: 2 ----------------------
oSIST prEN 513:2018


DRAFT
EUROPEAN STANDARD
prEN 513
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2017
ICS 83.140.99 Will supersede EN 513:1999
English Version

Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the resistance to artificial weathering
Plastiques - Profilés à base de poly(chlorure de vinyle) Kunststoffe - Profile auf Basis von Polyvinylchlorid
(PVC) - Détermination de la résistance au (PVC) - Bestimmung der Wetterechtheit und
vieillissement artificiel Wetterbeständigkeit durch künstliche Bewitterung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 513:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 513:2018
prEN 513:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols and abbreviations . 4
5 Principle . 5
6 Apparatus . 5
7 Test specimens . 5
8 Conditioning . 5
9 Weathering test con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.