EN ISO 11111-3:2005/A1:2009
(Amendment)Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009)
Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009)
Textilmaschinen - Sicherheitsanforderungen - Teil 3: Vliesstoffmaschinen - Änderung 1 (ISO 11111-3:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 3: Machines de production de nontissés - Amendement 1 (ISO 11111-3:2005/Amd 1:2009)
Tekstilni stroji - Varnostne zahteve - 3. del: Stroji za netkane tekstilije - Dopolnilo A1 (ISO 11111-3:2005/Amd 1:2009)
Amandma A1:2010 je dodatek k standardu SIST EN ISO 11111-3:2005
Ta del ISO 11111 je namenjen za uporabo skupaj z ISO 11111-1, ISO 11111-2, ISO 11111-6 in ISO 11111-7. Določa velike nevarnosti in ustrezne varnostne zahteve in/ali ukrepe za stroje, ki niso namenjeni tkanju. Ob upoštevanju področja ISO 11111-1 glede na ustreznost velja ta del ISO 11111 za vse stroje, obrate in s tem povezano opremo, namenjeno za odpiranje, čiščenje, spajanje, mikanje, iglanje, sušenje in šaržiranje v valju, kot določeno v Klavzuli 5.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2010
Tekstilni stroji - Varnostne zahteve - 3. del: Stroji za netkane tekstilije - Dopolnilo
A1 (ISO 11111-3:2005/Amd 1:2009)
Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment A1
(ISO 11111-3:2005/Amd 1:2009)
Textilmaschinen - Sicherheitsanforderungen - Teil 3: Vliesstoffmaschinen - Änderung A1
(ISO 11111-3:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 3: Machines de production
de nontissés - Amendement A1 (ISO 11111-3:2005/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 11111-3:2005/A1:2009
ICS:
59.120.99 Drugi tekstilni stroji Other textile machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11111-3:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 59.120.99
English Version
Textile machinery - Safety requirements - Part 3: Nonwoven
machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009)
Matériel pour l'industrie textile - Exigences de sécurité - Textilmaschinen - Sicherheitsanforderungen - Teil 3:
Partie 3: Machines de production de nontissés - Vliesstoffmaschinen - Änderung 1 (ISO 11111-3:2005/Amd
Amendement 1 (ISO 11111-3:2005/Amd 1:2009) 1:2009)
This amendment A1 modifies the European Standard EN ISO 11111-3:2005; it was approved by CEN on 3 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-3:2005/A1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
This document (EN ISO 11111-3:2005/A1:2009) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11111-3:2005/Amd 1:2009 has been approved by CEN as a EN ISO 11111-3:2005/A1:2009
without any modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this International standard.
Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.