iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14734:2022/AC:2023

(Corrigendum)

Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method

Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method

This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.

Dauerhaftigkeit von Holz und Holzprodukten - Bestimmung der Tränkbarkeit von Holzarten zur Tränkung mit Holzschutzmitteln - Laborverfahren

Durabilité du bois et des matériaux dérivés du bois - Détermination de l'imprégnabilité d'essences de bois par des produits de préservation - Méthode de laboratoire

Trajnost lesa in lesnih proizvodov - Ugotavljanje možnosti za impregnacijo lesnih vrst z biocidnimi proizvodi za zaščito lesa - Laboratorijska metoda - Popravek AC

General Information

Status
Published
Publication Date
10-Jan-2023
ICS
79.040 - Wood, sawlogs and sawn timber
Technical Committee
CEN/TC 38 - Durability of wood and derived materials
Drafting Committee
CEN/TC 38/WG 26 - Physical/chemical factors (analytical methods)
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Jan-2023
Completion Date
11-Jan-2023
Ref Project
SIST EN 14734:2022/AC:2023 - Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method

Relations

Corrects
EN 14734:2022 - Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
Effective Date
26-Oct-2022

Buy Standard

EN 14734:2022/AC:2023EN 14734:2022/AC:2023
PreviousNext
Corrigendum
EN 14734:2022/AC:2023
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14734:2022/AC:2023
01-marec-2023
Trajnost lesa in lesnih proizvodov - Ugotavljanje možnosti za impregnacijo lesnih
vrst z biocidnimi proizvodi za zaščito lesa - Laboratorijska metoda - Popravek AC
Durability of wood and wood-based products - Determination of treatability of timber
species to be impregnated with wood preservatives - Laboratory method
Dauerhaftigkeit von Holz und Holzprodukten - Bestimmung der Tränkbarkeit von
Holzarten zur Tränkung mit Holzschutzmitteln - Laborverfahren
Durabilité du bois et des matériaux dérivés du bois - Détermination de l'imprégnabilité
d'essences de bois par des produits de préservation - Méthode de laboratoire
Ta slovenski standard je istoveten z: EN 14734:2022/AC:2023
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
SIST EN 14734:2022/AC:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14734:2022/AC:2023

---------------------- Page: 2 ----------------------
SIST EN 14734:2022/AC:2023


EUROPEAN STANDARD EN 14734:2022/AC

NORME EUROPÉENNE
January 2023

EUROPÄISCHE NORM
ICS 79.040
English version

Durability of wood and wood-based products - Determination of treatability of
timber species to be impregnated with wood preservatives - Laboratory
method
Durabilité du bois et des matériaux dérivés Dauerhaftigkeit von Holz und Holzprodukten
du bois - Détermination de l'imprégnabilité
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 351-1:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
SIST EN 351-1:2023

This part of the EN 351 series establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These can be used as a basis for specifying preservative treatments for particular products.
This part of the EN 351 series defines terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
NOTE 1   Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE 2   Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of the EN 351 series does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of the EN 351 series does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informative) provides a decision process for specifying preservative treatment requirements.
Annex B (informative) gives an example of the marking system.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 351-2:2023(Main)
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood
SIST EN 351-2:2023

This part of the EN 351 series gives guidance for the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on the measurement of penetration and retention of a wood preservative in the treated wood.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335.
NOTE   Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of the EN 351 series can be applied for the subsequent examination of treated wood in service.
Annex A (informative) provides a selection of number of sample units.
Annex B (informative) provides examples of retention measurements.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 460:2023(Main)
Durability of wood and wood-based products - Guidance on performance
SIST EN 460:2023

This document gives guidance on the selection of wood and wood-based products for use in situations where they can be subject to degradation by fungi, wood destroying insects or marine borers. This guidance includes information on factors that can influence the service life of a wood or wood-based product when considering biological degradation. In many end uses, design, workmanship and maintenance will also influence the service life of the wood or wood-based product.
This document is a step toward the evaluation of the service life of a wood product.
This document does not consider:
1)   the durability characteristics of the glue used in wood-based products;
2)   the aesthetic function of wood products (discoloration, surface weathering, mould).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14734:2022(Main)
Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method
SIST EN 14734:2022

This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14128:2020(Main)
Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests
SIST EN 14128:2020

This document specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test.
Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives.
This document is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This document is also applicable for products applied to prevent the growth of the dry rot fungus through masonry.
This document is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards.
NOTE   This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR).
This document is not applicable to products used as fumigants.
This document is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1.
Annex A (informative) contains a guidance on re-testing after making variations in product formulation.
Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 599-2:2016(Main)
Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling
SIST EN 599-2:2017

This European Standard specifies the requirements for labelling wood preservative products according to their efficacy and suitability for use, for each of the five use classes defined in EN 335.
This European Standard is applicable to all wood preservative products supplied for application in liquid form for the preventive treatment of timbers (structural and non-structural) against wood-attacking fungi, wood-attacking insects and marine organisms as described in EN 1001-2 and EN 335. It is applicable to products for preventive treatments against fungi causing disfigurement (blue stain) of wood in service, only if this forms part of the overall preventive effectiveness of the product.
This European Standard is not applicable to wood preservative products supplied for application as pastes, solids or in capsule form because they cannot be tested without modification of the biological tests demanded in this standard. It does not apply either to wood preservative products for remedial (curative) treatments or to those applied to prevent fungi causing sap stain on green (unseasoned) timber.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 350:2016(Main)
Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials
SIST EN 350:2017

This European Standard gives guidance on methods for determining and classifying the durability of wood and wood-based materials against biological wood-destroying agents.
The methods can be applied either to individual wood species, batches of wood and processed wood-based materials, including heat-treated, preservative-treated wood and modified wood. However, this standard is not intended to replace testing of the efficacy of biocides.
The wood-destroying agents considered in this standard are:
—   wood-decay fungi (basidiomycete and soft-rot fungi);
—   beetles capable of attacking dry wood;
—   termites;
—   marine organisms capable of attacking wood in service.
Data on the biological durability of selected wood species considered of economic importance in European countries are presented in Annex B (informative), which also provides information relating to their geographical origin, density, sapwood width and treatability.
NOTE   Treatability, durability to disfiguring fungi, permeability to water and performance in use of wood and wood-based materials are also important issues. However, because standardized methods aiming to assess and classify these factors do not exist and/or have not been extensively experienced yet, preliminary guidance is given in Annex C (informative) for the classification of wood treatability with aqueous wood preservatives, Annex D (informative) for the classification of the permeability to water, Annex E (informative) for the durability to disfiguring fungi, and Annex F (informative) for the classification of performance.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 335:2013(Main)
Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
SIST EN 335:2013

This European Standard is applicable to solid wood and wood-based products.
This European Standard defines five use classes that represent different service situations to which wood and wood-based products can be exposed. This standard also indicates the biological agents relevant to each situation.
A use class is not a performance class and does not give guidance for how long wood and wood-based product will last in service.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16420:2012(Main)
Analytical Method for the Analysis of Propiconazole in treated Wood Samples
SIST-TP CEN/TR 16420:2013

This CEN Technical Report specifies a laboratory method for determining the content of propiconazole in treated wood using either Gas Chromatography (GC) or High Performance Liquid Chromatography (HPLC).
The method is aiming at determining the treatment quality at the time of treatment.
NOTE 1   Under appropriate circumstances the method is applicable for tebuconazole-treated wood as well as for the analysis of waste timber with respect to its propiconazole content.
The method has a detection limit lower than 1 µg propiconazole/g and a quantification limit corresponding to 30 µg propiconazole/g of wood material expressed as dry matter. It can be used over a measurement range up to a propiconazole content of 600 µg/g of dry matter.
NOTE 2   This method may need some modifications with some wood species such as hardwoods.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15003:2012(Main)
Durability of wood and wood-based products - Criteria for hot air processes for curative uses against wood destroying organisms
SIST-TP CEN/TR 15003:2013

This Technical Report specifies the minimum performance requirements for hot air treatment intended for application against specific classes of wood attacking organism. It specifies the minimum performance criteria to be achieved by hot air treatment.
NOTE   Until now sufficient practical experience and results of scientific tests are available only for heat treatments using hot air as a medium to increase the temperature inside building components up to a threshold lethal to wood destroying organisms. Therefore, this document is restricted to hot air treatments although other measures like, for example, radio waves or electric blankets may be useful means for limited and special applications.
This document is applicable only to hot air treatment, in so far as it is intended to cure attack by wood destroying beetles and the dry rot fungus (Serpula lacrymans).
This Technical Report is not applicable to eradicate an attack by termites or by fungi other than the dry rot fungus (Serpula lacrymans).
Hot air treatment as described in this document does not provide subsequent preventive protection against attack by wood-destroying organisms.
This document does not define the equipment, techniques or precise operation procedures required to achieve the parameters given in Clauses 4 and 5 for any set of practical circumstances. Specifications for particular practical circumstances have to be developed on a case by case basis by expert advisers/consultants.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day