EN 12621:2006

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

1.1   This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure – in the following called "machine" (see 3.1).
The coating material is supplied by air pressure or airless.
NOTE   Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery.
The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC.
This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment:
¾   pump units;
¾   pressure vessels;
¾   non-pressurised containers;
¾   interconnecting pipes and hoses
¾   flanges, nozzles, couplings, supports, lifting equipment etc.;
¾   agitators;
¾   filters;
¾   pulsation damping devices;
¾   all safety devices (e.g. level monitoring equipment);
¾   equipment for heating and/or cooling of the coating materials.
The machine may be fixed or mobile.
1.2   This European Standard excludes:
¾   pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC;
¾   atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment;
¾   atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment.
1.3   This European Standard does not apply to:
¾   processing of foodstuffs and pharmaceuticals;
¾   design and construction of pipes and hoses

Förder- und Umlaufanlagen für Beschichtungsstoffe unter Druck - Sicherheitsanforderungen

1.1   Diese Europäische Norm gilt für Gestaltung und Konstruktion von Förder  und Umlaufanlagen für Beschichtungs- und/oder Hilfsstoffe unter Druck – im Folgenden als „Anlage“ bezeichnet (siehe 3.1).
Die Beschichtungsstoffe können unter Druck oder drucklos zugeführt werden.
ANMERKUNG   Anlagen nach diesem Dokument können z. B. mit Farbmischgeräten, Spritz- und Sprüheinrichtungen, Spritzkabinen und -ständen und/oder stationären Ausrüstungen zum Beschichten verbunden sein.
Die durch diese Norm abgedeckten druckbetriebenen Teile der Anlagen dürfen die in Artikel 9 der Druckgeräte-Richtlinie 97/23/EG festgelegte Kategorie I nicht übersteigen.
Diese Europäische Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Förder- und Umlaufanlagen für Beschichtungs- und/oder Hilfsstoffe unter Druck zutreffen, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden (siehe Abschnitt 4).
Förder- und Umlaufanlagen für Beschichtungs- und/oder Hilfsstoffe unter Druck enthalten z. B. folgende Komponenten:
-   Pumpeinheiten;
-   Druckbehälter;
-   drucklose Behälter;
-   Verbindungsrohre und -schläuche;
-   Flansche, Düsen, Kupplungen, Halterungen, Hebezeuge usw.;
-   Rührwerke;
-   Filter;
-   Pulsation dämpfende Einrichtungen;
-   alle Sicherheits-, Mess- und Regeleinrichtungen (z. B. Überwachungseinrichtung für den Füllstand);
-   Einrichtungen zum Erwärmen und/oder Kühlen der Beschichtungsstoffe.
Die Anlage kann ortsfest oder ortsbeweglich sein.
1.2   Dieses Dokument gilt nicht für:
-   druckbetriebene Teile der Anlage, die die in Artikel 9 der Druckgeräte-Richtlinie 97/23/EG festgelegte Kategorie I übersteigen;
-   durch EN 1953:1998 abgedeckte Spritz- und Sprüheinrichtungen und die Versorgungsschläuche für diese Einrichtungen;
-   durch EN 50144-2-7:2001 und EN 50260-2-7:2002 abgedeckte Spritz- und Sprüheinrichtungen und die Versorgungsschläuche für diese Einrichtungen;
1.3   Dieses Dokument

Installations d'alimentation et de circulation de produits de revêtement sous pression - Prescriptions de sécurité

1.1   La présente Norme européenne s'applique à la conception et à la fabrication de systèmes pour l'alimentation et la circulation de produits de revêtement et/ou auxiliaires sous pression, désignés ci-après par le terme " machine " (voir 3.1).
Le produit de revêtement est alimenté soit par air comprimé, soit par pulvérisation sans air.
NOTE   Les machines concernées par la présente Norme européenne peuvent être associés par exemple à des machines de mélange de teintes, des équipements d'atomisation et de pulvérisation, des cabines et postes d'application de peinture et/ou des machines de revêtement automatiques.
Les composants soumis à la pression des machines concernées ne peuvent pas être classés au-delà de la catégorie I conformément à l'article 9 de la Directive 97/23/CE " Équipements sous pression ".
La présente Norme européenne traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux liés aux installations d'alimentation et de circulation de produits de revêtement et/ou auxiliaires sous pression, utilisés selon et dans les conditions prévues par le fabricant (voir Article 4).
Les installations pour l'alimentation et la circulation de produits de revêtement et/ou auxiliaires sous pression comprennent les équipements suivants :
-   unités de pompe ;
-   récipients sous pression ;
-   containers non pressurisés;
-   tuyaux et flexibles d'interconnexion ;
-   brides, buses, raccords, supports, équipement de levage, etc. ;
-   agitateurs ;
-   filtres ;
-   dispositifs de réduction des à-coups ;
-   tout dispositif de sécurité (par exemple, équipement de contrôle de niveau) ;
-   équipement pour réchauffer ou refroidir les produits de revêtement.
Le système peut être fixe ou mobile.
1.2   Sont exclus de la présente Norme européenne :
-   les phénomènes dangereux liés à la pression d'équipements classés dans une catégorie supérieure à la catégorie 1 conformément à l'article 9 de la Directive 97/23/CE " Équipements sous pression

Naprave za dovod in obtok premaznih materialov s pomočjo tlaka – Varnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 17-Jan-2006
• Withdrawal Date: 01-Jun-2010
• ICS: 87.100 - Paint coating equipment
• Technical Committee: CEN/TC 271 - Surface treatment equipment - Safety
• Drafting Committee: CEN/TC 271/WG 2 - Machines for coating and color mixing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Jun-2010
• Completion Date: 02-Jun-2010
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 12621:2006 - Machinery for the supply and circulation of coating materials under pressure - Safety requirements

Relations

• Merged Into: EN 12621:2006+A1:2010 - Machinery for the supply and circulation of coating materials under pressure - Safety requirements
• Effective Date: 03-Apr-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Machinery for the supply and circulation of coating materials under pressure - Safety requirements9DUQRVWQH]DKWHYHInstallations d'alimentation et de circulation de produits de revetement sous pression - Prescriptions de sécuritéFörder- und Umlaufanlagen für Beschichtungsstoffe unter Druck - Sicherheitsanforderungen87.100Oprema za nanašanje premazovPaint coating equipmentICS:SIST EN 12621:2006enTa slovenski standard je istoveten z:EN 12621:200601-maj-2006SIST EN 12621:2006SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12621January 2006ICS 87.100 English VersionMachinery for the supply and circulation of coating materialsunder pressure - Safety requirementsInstallations d'alimentation et de circulation de produits derevêtement sous pression - Prescriptions de sécuritéFörder- und Umlaufanlagen für Beschichtungsstoffe unterDruck - SicherheitsanforderungenThis European Standard was approved by CEN on 9 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12621:2006: E

National references to exposure limit values.28 Annex B (informative)
Relationship between categories and zones.30 Annex C (informative)
Classification of construction material’s reaction to fire - National standards.31

Relationship between this
European Standard and the Essential Requirements of EU Directive 98/37/EC.32 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC.33 Bibliography.34

1 Scope 1.1 This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure – in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery.
The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment:  pump units;  pressure vessels;  non-pressurised containers;  interconnecting pipes and hoses  flanges, nozzles, couplings, supports, lifting equipment etc.;  agitators;  filters;  pulsation damping devices;  all safety devices (e.g. level monitoring equipment);  equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. 1.2 This European Standard excludes:  pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC;  atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment;  atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment. 1.3 This European Standard does not apply to:  processing of foodstuffs and pharmaceuticals;
...