EN ISO 7047:2011

Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)

ISO 7047:2011 specifies the characteristics of countersunk raised head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess.

Linsensenkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Form Z - Produktklasse A (ISO 7047:2011)

Diese Internationale Norm legt die Eigenschaften von Linsensenkschrauben, in Produktklasse A, mit Gewinde
von M1,6 bis M10 und mit Kreuzschlitz Form H oder Form Z fest.
Falls in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt
werden, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1, ISO 965-2 und ISO 3506-1.

Vis à métaux à tête fraisée bombée à empreinte cruciforme de type H ou de type Z - Grade A (ISO 7047:2011)

L'ISO 7047:2011 spécifie les caractéristiques des vis à métaux à tête fraisée bombée à empreinte cruciforme de types H ou de type Z, de diamètre de filetage M1,6 à M10 inclus et de grade A.

Vijaki z lečasto ugrezno glavo in križno zarezo - Razred izdelave A (ISO 7047:2011)

Ta mednarodni standard določa značilnosti vijakov z lečasto ugrezno glavo in križno zarezo v obliki H ali Z, razreda izdelave A in z navoji od M1,6 do vključno M10. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 3506-1.

General Information

• Status: Published
• Publication Date: 31-Aug-2011
• Withdrawal Date: 30-Mar-2012
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 7047:2011 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)

Relations

• Replaces: EN ISO 7047:1994 - Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)
• Effective Date: 10-Sep-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7047:2011
01-december-2011
1DGRPHãþD
SIST EN ISO 7047:1996
9LMDNL]OHþDVWRXJUH]QRJODYRLQNULåQR]DUH]R5D]UHGL]GHODYH$,62
Raised countersunk head screws (common head style) with type H or type Z cross
recess - Product grade A (ISO 7047:2011)
Linsensenkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Form Z -
Produktklasse A (ISO 7047:2011)
Vis à métaux à tête fraisée bombée à empreinte cruciforme de type H ou de type Z -
Grade A (ISO 7047:2011)
Ta slovenski standard je istoveten z: EN ISO 7047:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7047:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7047:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 7047:2011


EUROPEAN STANDARD
EN ISO 7047

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 21.060.10 Supersedes EN ISO 7047:1994
English Version
Raised countersunk head screws (common head style) with type
H or type Z cross recess - Product grade A (ISO 7047:2011)
Vis à métaux à tête fraisée bombée à empreinte cruciforme Linsensenkschrauben (Einheitskopf) mit Kreuzschlitz Form
de type H ou de type Z - Grade A (ISO 7047:2011) H oder Form Z - Produktklasse A (ISO 7047:2011)
This European Standard was approved by CEN on 8 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7047:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7047:2011
EN ISO 7047:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7047:2011
EN ISO 7047:2011 (E)
Foreword
This document (EN ISO 7047:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7047:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7047:2011 has been approved by CEN as a EN ISO 7047:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7047:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 7047:2011

INTERNATIONAL ISO
STANDARD 7047
Third edition
2011-09-01


Raised countersunk head screws
(common head style) with type H or
type Z cross recess — Product grade A
Vis à métaux à tête fraisée bombée à empreinte cruciforme de type H
ou de type Z — Grade A




Refe
...