EN 71-1:2011/FprA1

Safety of toys - Part 1: Mechanical and physical properties

Amendment concerning legibility of warnings and correction of Gauss-meter specification. Revision of EN 71-1 to take into account the new Toys Safety Directive 2009/48/EC with regard to Legibility of warnings and Correction of Gauss-meter specification

Sicherheit von Spielzeug - Teil 1: Mechanische und physikalische Eigenschaften

Sécurité des jouets - Partie 1: Propriétés mécaniques et physiques

Varnost igrač - 1. del: Mehanske in fizikalne lastnosti - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 97.200.50 - Toys
• Technical Committee: CEN/TC 52 - Safety of toys
• Drafting Committee: CEN/TC 52/WG 3 - Safety of toys - Mechanical, physical and general properties
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 19-Nov-2013
• Due Date: 22-Aug-2014
• Completion Date: 19-Nov-2013
• Directive: 2009/48/EC - DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys
• Directive: 88/378/EEC - Safety of toys
• Mandate: M/445 - Standardisation mandate addressed to CEN and CENELEC within the framework of Directive 2009/48/EC revising Directive 88/378/EEC concerning the safety of Toys
• Ref Project: SIST EN 71-1:2011/kFprA1:2013 - Safety of toys - Part 1: Mechanical and physical properties - Amendment 1: "Legibility of warnings" including "correction of specification for Gauss-meter"

Relations

• Merged Into: EN 71-1:2011+A3:2014 - Safety of toys - Part 1: Mechanical and physical properties
• Effective Date: 18-Jan-2023
• Amends: EN 71-1:2011+A2:2013 - Safety of toys - Part 1: Mechanical and physical properties
• Effective Date: 09-Oct-2013
• Amends: EN 71-1:2011 - Safety of toys - Part 1: Mechanical and physical properties
• Effective Date: 26-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 71-1:2011/oprA1:2012
01-december-2012
9DUQRVWLJUDþGHO0HKDQVNHLQIL]LNDOQHODVWQRVWL'RSROQLOR$
Safety of toys - Part 1: Mechanical and physical properties - Amendment 1: "Legibility of
warnings" including "correction of specification for Gauss-meter"
Sicherheit von Spielzeug - Teil 1: Mechanische und physikalische Eigenschaften
Sécurité des jouets - Partie 1: Propriétés mécaniques et physiques
Ta slovenski standard je istoveten z: EN 71-1:2011/prA1
ICS:
97.200.50 ,JUDþH Toys
SIST EN 71-1:2011/oprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 71-1:2011/oprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 71-1:2011/oprA1:2012


EUROPEAN STANDARD
DRAFT
EN 71-1:2011
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
August 2012
ICS 97.200.50
English Version
Safety of toys - Part 1: Mechanical and physical properties -
Amendment 1: "Legibility of warnings" including "correction of
specification for Gauss-meter"
 Sicherheit von Spielzeug - Teil 1: Mechanische und
physikalische Eigenschaften
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 52.

This draft amendment A1, if approved, will modify the European Standard EN 71-1:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-1:2011/prA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 71-1:2011/oprA1:2012
EN 71-1:2011/prA1:2012 (E)
Contents Page
Foreword .3
7.1 General .3
7.2 Toys not intended for children under 36 months (see 4.22 and A.34) .4
A.33 Warnings, markings and instructions for use (see 7.1) .4

2

---------------------- Page: 4 ----------------------

SIST EN 71-1:2011/oprA1:2012
EN 71-1:2011/prA1:2012 (E)
Foreword
This document (EN 71-1:2011/prA1:2012) has been prepared by Technical Committee CEN/TC 52 “Safety of
toys”, the secretariat of which is held by DS.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
Underlined text to be added.
7.1 General
Amend 7.1 as follows:
Warnings on toys shall not be misleading or incorrect. Toys intended for children under 36 months shall
comply with the requirements in Clause 5. A warning on a toy or its packaging does not release the
manufacturer or his authorized representative from the obligation to meet these requirements.
A toy shall not bear a warning that conflicts with the intended use of the toy, as determined by virtue of its
function, dimension and characteristics.
The warnings shall be preceded by the words "Warning" or "Warnings", as appropriate. The word “Warning” or
“Warnings” may be followed by e.g. an exclamatio
...