iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10088-1:1995

(Main)

Stainless steels - Part 1: List of stainless steels

Stainless steels - Part 1: List of stainless steels

This European Standard lists - the chemical composition of stainless steels (see tables 1 to 4) - reference data on some physical properties (see tables A.1to A.4). Note: A CEN Report covering information on the forms of wrought products in which the grades are standardized and the application of the grades is in course of preparation.

Nichtrostende Stähle - Teil 1: Verzeichnis der nichtrostenden Stähle

Diese Europäische Norm führt auf - die chemische Zusammensetzung nichtrostender Stähle (siehe Tabellen 1 bis 4), - Anhaltsangaben für einige physikalische Eigenschaften (siehe Tabellen A.1 bis A.4) und gibt einige Informationen über die Sorteneinteilung (siehe Anhang B). Anmerkung: Ein CEN Report mit Informationen über die Erzeugnisformen, in denen die Sorten genormt sind und über die Anwendung der Sorten ist in Vorbereitung.

Aciers inoxydables - Partie 1: Liste des aciers inoxydables

La présente norme européenne spécifie: - la composition chimique des aciers inoxydables (voir tableaux 1 à 4), - les données de référence concernant certaines propriétés physiques (voir tableaux A.1 à A.4). Note: Un rapport CEN donnant des informations sur les diverses formes de produits corroyés pour lesquelles des nuances d'aciers inoxydables sont normalisées et l'application de ces nuances est en cours de préparation.

Nerjavna jekla - 1. del: Seznam nerjavnih jekel

General Information

Status
Withdrawn
Publication Date
25-Apr-1995
Withdrawal Date
31-May-2005
ICS
77.140.20 - Stainless steels
Technical Committee
ECISS/TC 105 - Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
Drafting Committee
ECISS/TC 23/SC 1 - Stainless steels
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jun-2005
Completion Date
01-Jun-2005
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
Ref Project
SIST EN 10088-1:1997 - Stainless steels - Part 1: List of stainless steels

Relations

Replaced By
EN 10088-1:2005 - Stainless steels - Part 1: List of stainless steels
Effective Date
22-Dec-2008

Buy Standard

EN 10088-1:1997EN 10088-1:1997
PreviousNext
Standard
EN 10088-1:1997
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nerjavna jekla - 1. del: Seznam nerjavnih jekelNichtrostende Stähle - Teil 1: Verzeichnis der nichtrostenden StähleAciers inoxydables - Partie 1: Liste des aciers inoxydablesStainless steels - Part 1: List of stainless steels77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10088-1:1995SIST EN 10088-1:1997en01-december-1997SIST EN 10088-1:1997SL
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 683-3:2022(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022)
SIST EN ISO 683-3:2022

This document specifies the technical delivery requirements for
—    semi-finished products, hot formed (e.g. blooms, billets, slabs) (see NOTE 1),
—    bars (see NOTE 1),
—    wire rod,
—    finished flat products, and
—    hammer or drop forgings (see NOTE 1)
manufactured from the case-hardening non-alloy or alloy steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of case-hardened machine parts.
NOTE 1   Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammerforged bars are covered under semi-finished products or bars and not under the term “hammer and drop forgings”.
NOTE 2   For International Standards relating to steels conforming with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-5:2021(Main)
Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
SIST EN ISO 683-5:2021

ISO 683-5:2017 gives the technical delivery requirements for
-      semi-finished products, e.g. blooms, billets, slabs (see note 1),
-      bars (see note 1),
-      wire rod,
-      hot-rolled plates (see note 2), and
-      hammer or drop forgings (see note 1)
manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2.
The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts.
The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       The term "plate" includes in the following also wide flats unless otherwise stated.
In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to this document, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4957:2018(Main)
Tool steels (ISO 4957:2018)
SIST EN ISO 4957:2018

This document specifies requirements for the following grades of wrought tool steels:
a)    non-alloy cold-work tool steels;
b)    alloy cold-work tool steels;
c)    alloy hot-work tool steels;
d)    high-speed tool steels.
If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or cold-rolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1.
NOTE       Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards.
Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-4:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016)
SIST EN ISO 683-4:2018

ISO 683-4:2016 gives the technical delivery requirements for semi-finished products (e.g. blooms, billets, slabs), bars and wire rod, manufactured from the free-cutting steels listed in Table 2 and supplied in one of the treatment conditions given for the different types of products in Table 1, rows 2 to 4.
It covers three groups of free-cutting steels for mechanical purposes as listed in Table 2, namely
a)    not intended for heat treatment,
b)    suitable for case-hardening, and
c)    suitable for quenching and tempering.
Free-cutting steels are often used as bright bars. For these products, refer to ISO 683‑18.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-4:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-1:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016)
SIST EN ISO 683-1:2018

ISO 683-1:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
-      finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening non-alloy steels and the non-alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 9 and 11), but can also be partly used in the normalized condition (see Table 10).
The requirements for mechanical properties given in ISO 683-1:2016 are restricted to the sizes given in Tables 9 and 10.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are, in the following, covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-1 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement between the manufacturer and purchaser at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-1:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-2:2018(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016)
SIST EN ISO 683-2:2018

ISO 683-2:2016 specifies the technical delivery requirements for
-      semi-finished products, hot formed, e.g. blooms, billets, slabs (see Note 1),
-      bars (see Note 1),
-      wire rod,
       finished flat products, and
-      hammer or drop forgings (see Note 1)
manufactured from the direct hardening alloy steels and the alloy flame- and induction-hardening steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1 and in one of the surface conditions given in Table 2.
The steels are, in general, intended for the manufacture of quenched and tempered or austempered (see 3.2 and Note 2) and flame- or induction-hardened machine parts (see Tables 8 and 9).
The requirements for mechanical properties given in ISO 683-2:2016 are restricted to the sizes given in the relevant Table 8.
NOTE 1       Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2       For the purposes of simplification, the term "quenched and tempered" is, unless otherwise indicated, used in the following also for the austempered condition.
NOTE 3       For International Standards relating to steels complying with the requirements for the chemical composition in Table 3, however, supplied in other product forms or treatment conditions than given above or intended for special applications, and for other related International Standards, see the Bibliography.
NOTE 4       ISO 683-2 :2016 does not apply to bright products and bars and wire rod for cold heading. For such products, see ISO 683‑18 and ISO 4954.
In special cases, variations in these technical delivery requirements or additions to them can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to ISO 683-2:2016, the general technical delivery requirements of ISO 404 are applicable.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10088-2:2014(Main)
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
SIST EN 10088-2:2015

This European Standard specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.
NOTE   General purposes include the use of stainless steels in contact with foodstuffs.
The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this European Standard, unless otherwise specified in this European Standard.
This European Standard does not apply to components manufactured by further processing of the product forms listed above with quality characteristics altered as a result of such further processing.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10088-1:2014(Main)
Stainless steels - Part 1: List of stainless steels
SIST EN 10088-1:2015

This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting steels and specified in the European Standards given in Table 1.
(...)
Reference data on some physical properties are given in Tables E.1 to E.8.
NOTE 1   A matrix that shows which steels are included in which standard is given in Annex B.
NOTE 2   Valve steels are specified in EN 10090.
NOTE 3   Steel castings are specified in various European Standards (see Bibliography).
NOTE 4   Tool steels are specified in EN ISO 4957.
NOTE 5   Welding consumables are specified in various European Standards (see Bibliography).

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-17:2014(Main)
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
SIST EN ISO 683-17:2015

ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day