EN ISO 13500:2006
(Main)Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2006)
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2006)
This International Standard covers physical properties and test procedures for materials manufactured for use in oil- and gas-well drilling fluids. The materials covered are barite, haematite, bentonite, nontreated bentonite, OCMA grade bentonite, attapulgite, sepiolite, technical grade low-viscosity carboxym ethylcellulose (CMC-LVT), technical grade high-viscosity carboxymethylcellulose (CMC-HVT), and starch. This International Standard is intended for the use of manufacturers of named products.
Erdöl- und Erdgasindustrie - Bohrspülungen - Spezifikationen und Prüfungen (ISO 13500:2006)
Industries du pétrole et du gaz naturel - Produits pour fluides de forage - Spécifications et essais (ISO 13500:2006)
Industrija za predelavo nafte in zemeljskega plina – Materiali za vrtalne tekočine – Specifikacije in preskusi (ISO 13500:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2006
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD±0DWHULDOL]DYUWDOQHWHNRþLQH±
6SHFLILNDFLMHLQSUHVNXVL ,62
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
(ISO 13500:2006)
Erdöl- und Erdgasindustrie - Bohrspülungen - Spezifikationen und Prüfungen (ISO
13500:2006)
Industries du pétrole et du gaz naturel - Produits pour fluides de forage - Spécifications
et essais (ISO 13500:2006)
Ta slovenski standard je istoveten z: EN ISO 13500:2006
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13500
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 75.180.10 Supersedes EN ISO 13500:1998
English Version
Petroleum and natural gas industries - Drilling fluid materials -
Specifications and tests (ISO 13500:2006)
Industries du pétrole et du gaz naturel - Produits pour Erdöl- und Erdgasindustrie - Bohrspülungen -
fluides de forage - Spécifications et essais (ISO Spezifikationen und Prüfungen (ISO 13500:2006)
13500:2006)
This European Standard was approved by CEN on 23 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13500:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 13500:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.
This document supersedes EN ISO 13500:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 13500:2006 has been approved by CEN as EN ISO 13500:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13500
Second edition
2006-02-15
Petroleum and natural gas industries —
Drilling fluid materials — Specifications
and tests
Industries du pétrole et du gaz naturel — Produits pour fluides de
forage — Spécifications et essais
Reference number
ISO 13500:2006(E)
©
ISO 2006
ISO 13500:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 13500:2006(E)
Contents Page
Foreword. vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviations . 1
3.1 Terms and definitions. 1
3.2 Symbols and abbreviations . 2
4 Requirements . 4
4.1 Quality control instructions. 4
4.2 Use of test calibration materials in checking testing procedures. 4
4.3 Records retention . 4
5 Calibration . 4
5.1 Coverage. 4
5.2 Equipment requiring calibration . 5
5.3 Calibration intervals . 9
6 Packaged material . 11
6.1 Description . 11
6.2 Apparatus — Pallets. 11
6.3 Apparatus — Bags. 11
6.4 Marking — Pallets. 11
6.5 Marking — Bags. 12
6.6 Pallet covers. 12
6.7 Package weight. 12
6.8 Storage. 12
6.9 Recycling . 12
7 Barite. 13
7.1 Principle. 13
7.2 Reagents and apparatus — Density by Le Chatelier flask . 13
7.3 Procedure — Density by Le Chatelier flask . 14
7.4 Calculation — Density by Le Chatelier flask. 15
7.5 Reagents and apparatus — Water-soluble alkaline earths as calcium. 15
7.6 Procedure — Water-soluble alkaline earth metals as calcium . 16
7.7 Calculation — Water-soluble alkaline earths as calcium . 16
7.8 Reagents and materials — Residue of diameter greater than 75 µm. 16
7.9 Procedure — Residue of diameter greater than 75 µm. 17
7.10 Calculation — Residue of diameter greater than 75 µm . 17
7.11 Reagents and apparatus — Particles less than 6 µm in equivalent spherical diameter
by sedimentation method . 18
7.12 Procedure — Particles less than 6 µm in equivalent spherical diameter by sedimentation
method . 18
7.13 Calculation — Particles less than 6 µm in equivalent spherical diameter by sedimentation
method . 19
8 Haematite (hematite). 22
8.1 Principle. 22
8.2 Reagent and apparatus — Density by Le Chatelier flask . 23
8.3 Procedure — Density by Le Chatelier flask . 23
8.4 Calculation — Density by Le Chatelier flask. 24
8.5 Reagents and apparatus — Water-soluble alkaline earth metals as calcium . 24
ISO 13500:2006(E)
8.6 Procedure — Water-soluble alkaline earth metals as calcium. 25
8.7 Calculation — Water-soluble alkaline earth metals as calcium . 25
8.8 Reagents and apparatus — Residues greater that 75 µm and 45 µm. 26
8.9 Procedure — Residues of diameter greater than 75 µm and 45 µm . 26
8.10 Calculation — Residues of diameter greater than 75 µm and 45 µm. 27
8.11 Reagents and apparatus — Particles less than 6 µm in equivalent spherical diameter
by sedimentation method. 27
8.12 Procedure — Particles less than 6 µm in equivalent spherical diameter by sedimentation
method . 28
8.13 Calculation — Particles less than 6 µm in equivalent spherical diameter by sedimentation
method . 28
9 Bentonite. 31
9.1 Principle . 31
9.2 Reagents and apparatus — Suspension properties . 31
9.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.