iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 10855-1:2024

(Main)

Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2024)

Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2024)

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.
This document specifies only transport-related requirements.

Offshore-Container und dazugehörige Anschlaggarnituren - Teil 1: Auslegung, Herstellung und Kennzeichnung von Offshore-Containern (ISO 10855-1:2024)

Conteneurs pour une utilisation en mer et dispositifs de levage associés - Partie 1: Conception, fabrication et marquage des conteneurs pour une utilisation en mer (ISO 10855-1:2024)

Le présent document spécifie les exigences relatives à la conception, à la fabrication et au marquage des conteneurs pour une utilisation en mer ayant une masse brute maximale inférieure ou égale à 25 000 kg, destinés à un usage répété à destination, en provenance ou entre des installations en mer et des navires.
Le présent document spécifie uniquement les exigences liées au transport.

Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 1. del: Načrtovanje, izdelava in označevanje plavajočih kontejnerskih enot (ISO 10855-1:2024)

General Information

Status
Published
Publication Date
26-Nov-2024
ICS
55.180.10 - General purpose containers
75.180.10 - Exploratory, drilling and extraction equipment
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Nov-2024
Completion Date
27-Nov-2024
Ref Project
SIST EN ISO 10855-1:2025 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2024)

Relations

Replaces
EN ISO 10855-1:2018 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
Effective Date
04-May-2022

Buy Standard

EN ISO 10855-1:2025EN ISO 10855-1:2025
PreviousNext
Standard
EN ISO 10855-1:2025
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 1. del: Načrtovanje,
izdelava in označevanje plavajočih kontejnerskih enot (ISO 10855-1:2024)
Offshore containers and associated lifting sets - Part 1: Design, manufacture and
marking of offshore containers (ISO 10855-1:2024)
Offshore-Container und dazugehörige Anschlaggarnituren - Teil 1: Auslegung,
Herstellung und Kennzeichnung von Offshore-Containern (ISO 10855-1:2024)
Conteneurs pour une utilisation en mer et dispositifs de levage associés - Partie 1:
Conception, fabrication et marquage des conteneurs pour une utilisation en me (ISO
10855-1:2024)
Ta slovenski standard je istoveten z: EN ISO 10855-1:2024
ICS:
53.020.99 Druga dvigalna oprema Other lifting equipment
55.180.10 Večnamenski kontejnerji General purpose containers
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10855-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 55.180.10; 75.180.10 Supersedes EN ISO 10855-1:2018
English Version
Offshore containers and associated lifting sets - Part 1:
Design, manufacture and marking of offshore containers
(ISO 10855-1:2024)
Conteneurs pour une utilisation en mer et dispositifs Offshore-Container und dazugehörige
de levage associés - Partie 1: Conception, fabrication et Anschlaggarnituren - Teil 1: Auslegung, Herstellung
marquage des conteneurs pour une utilisation en mer und Kennzeichnung von Offshore-Containern (ISO
(ISO 10855-1:2024) 10855-1:2024)
This European Standard was approved by CEN on 18 November 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10855-1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10855-1:2024) has been prepared by Technical Committee ISO/TC 67 "Oil and
gas industries including lower carbon energy" in collaboration with Technical Committee CEN/TC 12
“Oil and gas industries including lower carbon energy” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10855-1:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10855-1:2024 has been approved by CEN as EN ISO 10855-1:2024 without any
modification.
International
Standard
ISO 10855-1
Second edition
Offshore containers and associated
2024-11
lifting sets —
Part 1:
Design, manufacture and marking
of offshore containers
Conteneurs pour une utilisation en mer et dispositifs de levage
associés —
Partie 1: Conception, fabrication et marquage des conteneurs
pour une utilisation en mer
Reference number
ISO 10855-1:2024(en) © ISO 2024

ISO 10855-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 10855-1:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Symbols . 5
5 Design . 5
5.1 General .5
5.2 Structural strength .6
5.2.1 General .6
5.2.2 Lifting loads .6
5.2.3 Impact loads .8
5.2.4 Internal forces on container walls .9
5.2.5 Minimum material thickness .9
5.3 Welding . .9
5.4 Additional design details .9
5.4.1 Floor . .9
5.4.2 Doors and hatches .9
5.4.3 Intermediate cargo decks .9
5.4.4 Driving ramps .10
5.4.5 Internal lashing points .10
5.4.6 Forklift pockets .10
5.4.7 Top protection .10
5.4.8 Pad eyes .11
5.4.9 Corner fittings .11
5.4.10 Equipment supports and protection. 12
5.4.11 Coating and corrosion protection . 12
5.5 Tank containers . 12
5.5.1 General . 12
5.5.2 Frame . 12
5.5.3 Tanks for fluids . 13
5.5.4 Impact protection on tank containers for dangerous cargoes . 13
5.6 Containers for bulk solids . 13
6 Materials .13
6.1 Steel — General . 13
6.2 Rolled and extruded steels in offshore container structures .14
6.2.1 General requirements .14
6.2.2 Groups of steels .14
6.2.3 Stainless steel . 15
6.2.4 Steel forgings .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10855-2:2024(Main)
Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2024)
SIST EN ISO 10855-2:2025

This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10855-3:2024(Main)
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2024)
SIST EN ISO 10855-3:2025

This document specifies requirements for the periodic inspection, examination and testing of offshore containers, built in accordance with ISO 10855-1 and with a maximum gross mass not exceeding 25 000 kg, and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10855-2:2024(Main)
Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2024)
SIST EN ISO 10855-2:2025

This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10855-3:2024(Main)
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2024)
SIST EN ISO 10855-3:2025

This document specifies requirements for the periodic inspection, examination and testing of offshore containers, built in accordance with ISO 10855-1 and with a maximum gross mass not exceeding 25 000 kg, and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13947:2024(Main)
Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen (ISO 13947:2024)
kSIST FprEN ISO 13947:2024

This document specifies a metallographic test method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. This test method is applicable to repress powder-forged test specimens in which there has been minimal lateral flow (<1 %). The core region of the powder-forged test specimen must not contain porosity detectable at 100x magnification.
This test method can also be applied to determine the non-metallic inclusion content of powder-forged steel parts. However, in parts where there has been a significant amount of material flow, the near-neighbour separation distance needs to be changed, or the inclusion sizes agreed between the parties need to be adjusted.
This test method is not applicable for determining the non-metallic inclusion level of parts that have been forged such that the core region contains porosity. At the magnification used for this test method, residual porosity is hard to distinguish from inclusions. Too much residual porosity makes a meaningful assessment of the inclusion population impossible.
This test method can also be applied to materials that contain manganese sulphide (admixed or prealloyed), provided the near-neighbour separation distance is changed from 30 µm to 15 µm.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18034:2024(Main)
Algae and algae products - Methods of sampling and analysis - Determination of chlorophyll a content
kSIST FprEN 18034:2024

This document specifies a laboratory method for the determination of chlorophyll a content in algae. The method was initially tested and evaluated on the microalgae species Nannochloropsis sp. and a heat treated algal product tomato soup with Nannochloropsis sp. supplement, and the macro algae species Ulva sp., Furcellaria lumbricalis, and Saccharina latissima. During an Interlaboratory Trial the method was tested on the microalgae species Nannochloropsis sp. and the macro algae species Saccharina latissima. The microalgae species Nannochloropsis sp. and Phaodactlylum sp. and the macro algae species Ulva sp. and Saccharina latissima were tested in a Round Robin test. This document is only validated for chlorophyll a, but it can be used for other chlorophylls as well.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16605:2024(Main)
Space - Galileo Timing Receiver - Functional and Performance Requirements and associated Tests
oSIST prEN 16605:2024

This document is intended to stablish and define functional and performance requirements and associated tests for Galileo Timing Receivers. This document covers the following topics related to Galileo Timing Receivers:
- GNSS constellations and frequencies processed: Galileo plus additionally GPS, with nominal mode being dual-frequency processing,
- Time scales processed, including at least Galileo System Time and Universal Time Coordinate,
- User dynamics, with two operation modes: static users with well-known and static antenna position and dynamics users with moving antenna,
- Holdover devices,
- Nominal and back-up modes, including single-frequency modes, single-constellation modes and holdover mode.
- Processing of timing integrity information disseminated by the Galileo System,
- Time Receiver Autonomous Integrity Monitoring processing,
- Anti-jamming and anti-spoofing capabilities, including Automatic Gain Control monitoring and Galileo Open Service Navigation Message Authentication processing,
- Robustness to multipath.
In addition, this document gives guidelines for the installation and maintenance of the receiver, including antenna, cabling and receiver installation, initial and periodic receiver calibration, and periodic maintenance.
On top of the functional requirements, performance requirements this document defines in terms of different key performance indicators such as:
- Accuracy, availability, continuity and integrity requirements,
- T-RAIM performances, including time to alert,
- Holdover performances including maximum degradation of the timing solution with time and maximum holdover time,
This document also gives a simple test suite to verify the most fundamental requirements of the Galileo Timing Receivers.

  • Draft
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18001:2024(Main)
Curtain walling - Environmental product declarations - Product category rules for curtain walling
kSIST FprEN 18001:2024

This document provides product category rules (PCR) for Type III environmental declarations for curtain walling as defined in EN 13830:2015+A1:2020, excluding openable infills. Openable infills are addressed in EN 17213:2020.
This document complements the core rules for the product category of construction products as defined in EN 15804:2012+A2:2019. This document complements EN 15804:2012+A2:2019 and does not replace it.
NOTE   The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
-   defines the parameters to be declared and the way in which they are collated and reported;
-   describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   defines rules for the development of scenarios;
-   includes the rules for calculating the life cycle inventory and the life cycle impact assessment underlying the EPD, including the specification of the data quality to be applied;
-   includes the rules for reporting the predetermined, environmental and health information that is not covered by life cycle assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
-   defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-12:2024(Main)
Methods of testing cement - Part 12: Reactivity of cement constituents - Heat of hydration and bound water content methods
SIST EN 196-12:2025

This document specifies two equivalent test methods to assess the chemical reactivity of a pozzolanic or latent hydraulic cement constituent or concrete addition by measurements of heat of hydration (see Clause 5 and 8.3 Method A, Heat of Hydration) or bound water content (see Clause 5 and 8.4 Method B, Bound Water Content) of hydrated pastes composed of the cement constituent or concrete addition, calcium hydroxide, calcium carbonate, potassium sulfate, and potassium hydroxide cured at 40 °C for 72 h and 168 h (3 days and 7 days).
These two test methods measure chemical reactivity of test specimens intended for use as cementitious materials, such as cement constituents and concrete additions. The test methods do not distinguish between latent hydraulic and pozzolanic reactivity.
The test methods are used for qualification purposes if the cement constituents or concrete additions are tested at the fineness as specified by the respective product standards. In the absence of a product standard or a specification in the product standard, the constituents are tested at the fineness of the intended use.
NOTE   In case the test methods are used for purposes of comparison of intrinsic reactivity, cement constituents are tested at similar fineness, where possible.
The test methods are also used for testing other new constituents that are latent hydraulic or pozzolanic and that are not covered by EN 197 series product standards. However, for such new constituents the validity of the underlying correlations with strength development have not been verified; in consequence the test results can only be used for informative and indicative purposes.
Furthermore, these test methods are used in manufacturing control of cement constituents for assessing their latent hydraulic or pozzolanic reactivity.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4869-104:2024(Main)
Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 104: Multimode female termini size 12 - Technical specification
kSIST FprEN 4869-104:2024

This document details the dimensions and performance requirements of a multimode female size 12, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 12 socket crimp contact cavities (series I and III): connectors with cavities for contact of type EN 3155-009F12.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day