EN ISO 20482:2003
(Main)Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003)
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003)
ISO 20482:2003 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming.
Metallische Werkstoffe - Bleche und Bänder - Tiefungsversuch nach Erichsen (ISO 20482:2003)
Diese Internationale Norm legt ein Standardverfahren zur Bestimmung der Tiefungsfähigkeit metallischer Bleche und Bänder fest, die eine Dicke von 0,1 mm bis 2 mm und eine Breite von 90 mm oder mehr haben.
Mit anderen Werkzeugen können auch dickere bzw. schmalere Bänder geprüft werden. In diesen Fällen sind Indices dem Erichsen-Tiefungswert beizufügen, wie in Tabelle 1 angegeben.
Matériaux métalliques - Tôles et bandes - Essai d'emboutissage Erichsen (ISO 20482:2003)
L'ISO 20482:2003 spécifie une méthode d'essai pour déterminer l'aptitude à la déformation plastique par emboutissage des tôles et bandes métalliques, d'épaisseur comprise entre 0,1 mm et 2 mm et de largeur égale ou supérieure à 90 mm.
Kovinski materiali – Pločevine in trakovi – Preskus globokega vleka po Erichsenu (ISO 20482:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2004
.RYLQVNLPDWHULDOL±3ORþHYLQHLQWUDNRYL±3UHVNXVJORERNHJDYOHNDSR(ULFKVHQX
,62
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003)
Metallische Werkstoffe - Bleche und Bänder - Tiefungsversuch nach Erichsen (ISO
20482:2003)
Matériaux métalliques - Tôles et bandes - Essai d'emboutissage Erichsen (ISO
20482:2003)
Ta slovenski standard je istoveten z: EN ISO 20482:2003
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 20482
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2003
ICS 77.040.10
English version
Metallic materials - Sheet and strip - Erichsen cupping test (ISO
20482:2003)
Matériaux métalliques - Tôles et bandes - Essai Metallische Werkstoffe - Bleche und Bänder -
d'emboutissage Erichsen (ISO 20482:2003) Tiefungsversuch nach Erichsen (ISO 20482:2003)
This European Standard was approved by CEN on 2 June 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20482:2003 E
worldwide for CEN national Members.
CORRECTED 2003-09-24
Foreword
This document (EN ISO 20482:2003) has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals" in collaboration with Technical Committee ECISS/TC 1 "Steel -
Mechanical testing", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2004, and conflicting national
standards shall be withdrawn at the latest by January 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 20482:2003 has been approved by CEN as EN ISO 20482:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 4287 1997 Geometrical product specifications EN ISO 4287 1998
(GPS) - Surface texture: Profile
method - Terms, definitions and
surface texture parameters
INTERNATIONAL ISO
STANDARD 20482
First edition
2003-07-01
Metallic materials — Sheet and strip —
Erichsen cupping test
Matériaux métalliques — Tôles et bandes — Essai d'emboutissage
Erichsen
Reference number
ISO 20482:2003(E)
©
ISO 2003
ISO 20482:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
ISO 20482:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20482 was prepared by Technical Committee ISO/TC 164, Mechanical testing of metals, Subcommittee
SC 2, Ductility testing.
This first edition of ISO 20482 cancels and replaces ISO 8490:1986 of which it constitutes a technical revision.
INTERNATIONAL STANDARD ISO 20482:2003(E)
Metallic materials — Sheet and strip — Erichsen cupping test
1 Scope
This International Standard specifies a standard test method for determining the ability of metallic sheets and
strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic
deformation in stretch forming.
For materials that are thicker and when only narrower strips are available, tools of specified dimensions are
provided, in which case subscripts are used, as shown in Table 1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.