iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 17996:2024

(Main)

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

This European Standard is a complementary document for the installation of ductile iron pipes, fittings, accessories and their joints, covered by EN 598:2009 harmonized standard. It is intended to describe, in a wider perspective, installation technologies, tools and pipelines particular examples, applicable for the construction, outside buildings, of:
-   Drainage pipeline systems;
-   Raw water pipeline systems;
-   Sewage pipeline systems;
-   Pipeline systems conveying surface water (e.g. rainwater), domestic waste water and/or certain types of industrial effluents, either in separate systems or in combined systems;
-   Operating without pressure (gravity sewers) or with positive or negative pressure;
-   Below or above ground installation types.
It also gives some site operation/site instructions for the application of fittings, intended to be used for the connection of ductile iron drains and sewers to other materials as plastic, concrete, vitrified clay, etc.
This European Standard is not intended to cover:
-   Hydraulic design of drains and sewers systems outside buildings. For this purpose, EN 16933-2 applies.
-   Construction and site testing of drains and sewers. For this purpose, EN 1610 applies.
-   Trenchless construction and testing of drains and sewers. For this purpose, EN 12889:2000 applies

Rohre, Formstücke, Zubehörteile aus duktilem Gusseisen und ihre Verbindungen für Wasserleitungen - Richtlinien für die Installation von Rohrleitungen

Cevi, fitingi, pribor in spoji iz duktilne železove litine za kanalizacijo - Smernice za vgradnjo cevovodov

General Information

Status
Published
Publication Date
20-Feb-2024
ICS
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 203 - Cast iron pipes, fittings and their joints
Drafting Committee
CEN/TC 203/WG 9 - Revision of EN 545, EN 598 and EN 969
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Feb-2024
Due Date
11-Jan-2024
Completion Date
21-Feb-2024
Ref Project
SIST-TP CEN/TR 17996:2024 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

Buy Standard

kTP FprCEN/TR 17996:2023 - BARVEkTP FprCEN/TR 17996:2023 - BARVE
PreviousNext
Draft
kTP FprCEN/TR 17996:2023 - BARVE
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 17996:2023
01-december-2023
Cevi, fitingi, pribor in spoji iz duktilne železove litine za kanalizacijo - Smernice za
vgradnjo cevovodov
Ductile iron pipes, fittings, accessories and their joints for sewerage applications -
Guidelines for Pipelines Installation
Rohre, Formstücke, Zubehörteile aus duktilem Gusseisen und ihre Verbindungen für
Wasserleitungen - Richtlinien für die Installation von Rohrleitungen
Ta slovenski standard je istoveten z: FprCEN/TR 17996
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
kSIST-TP FprCEN/TR 17996:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 17996:2023

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 17996:2023


FINAL DRAFT
TECHNICAL REPORT
FprCEN/TR 17996
RAPPORT TECHNIQUE

TECHNISCHER REPORT

June 2023
ICS
English Version

Ductile iron pipes, fittings, accessories and their joints for
sewerage applications - Guidelines for Pipelines
Installation
 Rohre, Formstücke, Zubehörteile aus duktilem
Gusseisen und ihre Verbindungen für Wasserleitungen
- Richtlinien für die Installation von Rohrleitungen


This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC
203.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 17996:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 17996:2023
FprCEN/TR 17996:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Assembling methods for pipes and fittings . 12
4.1 General. 12
4.2 Crowbar method . 12
4.3 Rope winches/Lever hoists method . 13
4.4 Devices with lever/Jointing tackle method . 15
4.5 Trench excavator method . 16
5 Laying in trench . 16
5.1 General. 16
5.2 Safety rules . 17
5.3 Laying in the presence of excavation shoring . 18
5.3.1 Obligations .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15655-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
SIST EN 15655-2:2021

This document specifies the requirements and test methods applicable to factory applied internal lining made of thermoplastic acid modified polyolefin (TMPO) for the heavy duty corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969. This document also applies to pipes with only socket and spigot ends coated with TMPO. Fittings and accessories are covered separately by EN 14901-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14628-1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
SIST EN 14628-1:2020

This document specifies the requirements and test methods applicable to factory applied extruded polyethylene coatings for the external corrosion protection of ductile iron pipes according to EN 545, EN 598 and EN 969 for use at operating temperatures up to 50 °C.
This document is not applicable to ductile iron pipes protected with thin PE sleeve. Special works at site like drilling, tapping, etc. can influence the corrosion protection properties. Those job steps are intended to be included in the instructions of pipe saddle and accessory manufacturers and all other essential installation instructions. These instructions are not part of this document.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14901-2:2019(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
SIST EN 14901-2:2020

This document defines the requirements and test methods for factory applied thermoplastic acid modified polyolefin (TMPO) coatings used for the protection of ductile iron fittings and accessories according to EN 545, EN 598, EN 969, EN 12842 and EN 14525:
-   conveying water (e.g. potable water, raw water, …) at operating temperature up to 50 °C; or
-   conveying waste water at operating temperature up to 45 °C; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in D.2.3 of EN 545:2010.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14901-1:2014+A1:2019(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
SIST EN 14901-1:2014+A1:2020

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15655-1:2018(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
SIST EN 15655-1:2019

This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545, EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16950:2016(Main)
Ductile iron pipes, fittings and accessories - Sanitary characteristics and test methods
SIST-TP CEN/TR 16950:2017

This Technical Report contains the sanitary characteristics and test methods applicable to those factory applied lining, coating and jointing materials of ductile iron pipes and fittings conforming to EN 545 which are in contact with water intended for human consumption for use at operating temperatures up to 50 °C. Ductile cast iron itself is not in direct contact with the conveyed water therefore no characteristics in respect to the sanitary behaviour are necessary. As ductile cast iron is impermeable against diffusion of organic substances the water quality is maintained in service. Different surface/volume ratios are used in the tests for pipes, fittings and joints to reflect the different impact of their surface areas exposed to the water in the overall pipeline.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 545:2010(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
SIST EN 545:2011

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings:
-   to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.);
-   with or without pressure;
-   to be installed below or above ground.
This European Standard is applicable to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   supplied externally and internally coated;
-               suitable for fluid temperatures between 0 °C and 50 °C, excluding frost;
-   not intended for use in areas subject to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard.
In addition, reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day