EN 14041:2004
(Main)Resilient, textile and laminate floor coverings - Essential characteristics
Resilient, textile and laminate floor coverings - Essential characteristics
This European Standard specifies the health, safety and energy saving requirements for:
· resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats;
· textile floor coverings, excluding loose-laid mats and rugs;
· laminate floor coverings;
· floor panels for loose-laying.
It also specifies procedures for testing for the evaluation of conformity of the products and the requirements for marking and labelling.
The products are intended for use as floor coverings within a building or externally, according to the manufacturers' specifications.
The European Standard does not apply to floor coverings containing asbestos.
This European Standard does not specify requirements unrelated to health, safety and energy saving, which are covered in the separate European Standards for these products, listed in annex A. To perform correctly, products covered by this standard require correct installation and maintenance. This standard does not, however, cover installation or maintenance, but does give advice on minimising slip hazards.
Elastische, textile und Laminat-Bodenbeläge - Wesentliche Eigenschaften
Revêtements de sol résilients, textiles et stratifiés - Caractéristiques essentielles
La présente Norme européenne spécifie les exigences relatives à la santé, à la sécurité et aux économies d'énergie pour :
- les revêtements de sol résilients fabriqués à partir de plastiques, de linoléum, de liège ou de caoutchouc, à l'exclusion des tapis non posés ;
- revêtements de sol textiles, à l'exclusion des tapis en pose libre ;
- revêtements de sol stratifiés ;
- panneaux de sol en pose libre.
La présente norme spécifie également les procédures d'essai pour l'évaluation de la conformité des produits et les exigences relatives au marquage et à l'étiquetage.
Les produits sont destinés à être utilisés comme revêtements de sol pour usage intérieur ou usage extérieur conformément aux spécifications des fabricants.
La norme ne s'applique pas aux revêtements de sol contenant de l'amiante.
La présente Norme européenne ne spécifie pas les exigences qui ne sont pas liées à la santé, à la sécurité et aux économies d'énergie et qui sont couvertes par les normes européennes distinctes relatives à ces produits, dont la liste est donnée dans l'annexe A. Pour donner de bonnes performances, les produits relevant de la présente norme doivent être correctement installés et entretenus. La présente norme ne traite pas de l'installation ou de l'entretien, mais elle donne des conseils pour réduire au minimum les risques de glissade
Netekstilne, tekstilne in laminirane (plastene) talne obloge - Bistvene značilnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Resilient, textile and laminate floor coverings - Essential characteristicsRevetements de sol résilients, textiles et stratifiés - Caractéristiques essentiellesElastische, textile und Laminat-Bodenbeläge - Wesentliche Eigenschaften97.150Netekstilne talne oblogeNon-textile floor coverings59.080.60Tekstilne talne oblogeTextile floor coveringsICS:SIST EN 14041:2005enTa slovenski standard je istoveten z:EN 14041:200401-marec-2005SIST EN 14041:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14041August 2004ICS 59.080.60; 97.150English versionResilient, textile and laminate floor coverings - EssentialcharacteristicsRevêtements de sol résilients, textiles et stratifiés -Caractéristiques essentiellesElastische, textile Bodenbeläge und Laminatböden -Wesentliche EigenschaftenThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14041:2004: E
Other European Standards for resilient, textile and laminate floor coverings.14 Annex B (normative)
Analysis of pentachlorophenol in floor coverings.16 B.1 Scope.16 B.2 Apparatus and materials.16 B.3 Sampling and specimen preparation.16 B.4 Sample extraction and analysis.16 B.5 Expression of results.16 Annex C (informative)
Guidance on the reduction of slip hazards.17 C.1 General.17 C.2 Design.17 C.3 Service.18 C.4 User responsibility.18 C.5 Conclusion.19 Annex D (normative)
Factory production control and reaction to fire testing.20 D.1 General.20 D.2 Control of raw material.20 D.3 Process control.20 D.4 Calibration plan.20 D.5 Testing of finished products.21
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.23 ZA.1 Scope and relevant clauses.23 ZA.2 Procedure for the attestation of conformity of products.25 ZA.3 CE Marking and labelling – Information to accompany the CE marking.28 Bibliography.30
with foam backing. EN 1817, Resilient floor coverings – Specification for homogeneous and heterogeneous smooth rubber floor coverings. EN 12199, Resilient floor coverings – Specifications for homogeneous and heterogeneous relief rubber floor coverings. EN 12466:1998, Resilient floor coverings – Vocabulary. EN 12524, Building materials and products – Hygrothermal properties – Tabulated design values. EN 12673, Water quality – Gas chromatographic determination of some selected chlorophenols in water. EN 13238:2001, Reaction to fire tests for building products – Conditioning procedures and general rules for selection of substrates. EN 13329, Laminate floor coverings – Specifications, requirements and test methods. EN 13501-1:2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.