EN 13893:2002
(Main)Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
This European standard specifies the parameters for the measurement of dynamic coefficient of friction (u) on surfaces of resilient, laminate and textile floor coverings, usually walked on with shoes. Reliefed floor coverings with a displacement volume <= 4 cm3/dm2 are included. The measurements are made on dry flooring surfaces only.
Elastische, laminierte und textile Bodenbeläge - Messung des Gleitreibungskoeffizienten von trockenen Bodenbelagsoberflächen
Diese Europäische Norm legt die Parameter für die Messung des Gleitreibungskoeffizienten (u) auf den Oberflächen von elastischen, laminierten und textilen Bodenbelägen fest, die üblicherweise mit Schuhen begangen werden. Diese Norm gilt auch für profilierte Bodenbeläge mit einem Verdrängungsvolumen von <= 4 cm3/dm2. Die Messungen sind ausschließlich auf trockenen Bodenbelagsoberflächen durchzuführen.
Revêtements de sol résilients, stratifiés et textiles - Détermination du coefficient de frottement dynamique sur la surface des sols secs
La présente Norme européenne spécifie la méthode de mesurage du coefficient de frottement dynamique ( ) sur la surface des revêtements de sol résilients, stratifiés et textiles sur lesquels on marche généralement avec des chaussures.
Elle couvre les revêtements de sol structurés pour lesquels le volume de déplacement est 4 cm3/dm2.
Les mesurages sont effectués en laboratoire et uniquement sur des surfaces de revêtement sèches à la sortie de l'usine. La méthode décrite ne convient pas aux essais réalisés sur des surfaces humides ou contaminées.
Netekstilne, laminatne in tekstilne talne obloge - Merjenje dinamičnega koeficienta trenja na suhih talnih površinah
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elastische, laminierte und textile Bodenbeläge - Messung des Gleitreibungskoeffizienten von trockenen BodenbelagsoberflächenRevetements de sol résilients, stratifiés et textiles - Détermination du coefficient de frottement dynamique sur la surface des sols secsResilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces97.150Netekstilne talne oblogeNon-textile floor coverings59.080.60Tekstilne talne oblogeTextile floor coveringsICS:Ta slovenski standard je istoveten z:EN 13893:2002SIST EN 13893:2003en01-februar-2003SIST EN 13893:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13893November 2002ICS 59.080.60; 97.150English versionResilient, laminate and textile floor coverings - Measurement ofdynamic coefficient of friction on dry floor surfacesRevêtements de sol résilients, stratifiés et textiles -Détermination du coefficient de frottement dynamique surla surface des sols secsElastische, laminierte und textile Bodenbeläge - Messungdes Gleitreibungskoeffizienten von trockenenBodenbelagsoberflächenThis European Standard was approved by CEN on 26 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13893:2002 ESIST EN 13893:2003
The method describedis not suitable for testing on wet or contaminated surfaces.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 522:1998, Adhesives for leather and footwear materials — Bond strength — Minimum requirements andadhesive classification.EN 12466:1998, Resilient floor coverings — Vocabulary.EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shorehardness) (ISO 868:1985).3 Terms and definitionsFor the purposes of this European Standard, the terms and definitions of EN 12466:1998 together with thefollowing apply.3.1dynamic coefficient of friction, µquotient of the horizontal frictional force and the vertical load during motion at a constant speed between the sliderand the horizontal floor covering3.2displacement volumeopen volume of a relief floor covering beneath the wear surfaceNOTEThe method for determination of this property is given in annex A.4 PrincipleSliders made from the defined material and having a definite shape are loaded to impose a specified force on thefloor covering. The loaded sliders are pulled parallel to the surface of the floor covering at a constant speed. Thehorizontal force applied to pull the sliders is recorded over the length of a trace. The horizontal force is divided bythe vertical force to obtain the dynamic coefficient of friction.SIST EN 13893:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.