EN 30-1-3:2003/prA1
(Amendment)Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glass ceramic hotplate
Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glass ceramic hotplate
Modifications to 5.1.4.3, 6.7, 7.6 and Table ZA.1.
Haushalt-Kochgeräte für gasförmige Brennstoffe - Teil 1-3: Sicherheit - Geräte mit Glaskeramik-Kochteil
Appareils de cuisson domestiques utilisant les combustibles gazeux - Partie 1-3: Sécurité - Appareils comportant une table de travail vitrocéramique
Plinski kuhalni aparati za gospodinjstvo – 1-3. del: Varnost – Aparati s steklokeramično kuhalno ploščo – Dopolnilo A1
General Information
Relations
This May Also Interest You
This European Standard specifies the special constructional and operational characteristics, as well as the requirements and methods of test for safety and marking, for domestic cooking appliances having forced-convection ovens and /or grills using combustible gases, as defined in EN 30-1-1:2008+A2:2010.
Unless specifically excluded, this European Standard applies to appliances or their component parts, whether the component parts are independent or incorporated as part of the appliance, even if the other heating components use electrical energy (for example combined gas-electric cookers).
This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that are associated with the use of gas. It does not include requirements covering the electric safety of electrically-heated components or their associated equipment1).
This European Standard does not apply to:
- outdoor appliances;
- appliances connected to a combustion products evacuation duct;
- appliances having a pyrolytic gas oven;
- appliances having covered burners which do not comply with the constructional requirements
of EN 30-1-1:2008+A2:2010, 5.2.8.2.2;
- appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design;
- appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device;
- appliances equipped with a burner having a fan for the supply of combustion air or for the evacuation of the products of combustion;
- appliances supplied at pressures greater than those defined in EN 30-1-1:2008+A2:2010, 7.1.2;
- appliances equipped with an oven and/or with a grill having a fan either for the supply of combustion air or for the evacuation of the products of combustion;
- appliances equipped with a compartment in which a burner and an electric heating element can function simultaneously;
- appliances having one or more burners that are capable of remote operation (type 1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present.
This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.
This European Standard only covers type testing.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft24 pagesEnglish languagesale 10% offe-Library read for×1 day
- 25-Apr-2023
- 97.040.20
- 2016/426
- M/BC/CEN/89/6
- CEN/TC 49
EN 15181:2007+A1specifies the method of test for determining the gas energy consumption in gas-fired domestic ovens when they are being used in one or more of the oven cooking modes defined in 3. 1. It applies to the gas-fired domestic ovens which are capable of utilizing gases of group H or group E !or third family gases", possibly after conversion according to instructions for use.This European Standard applies to these gas-fired domestic ovens, whether they are separate appliances or component parts of domestic cooking appliances.This European Standard also applies to domestic appliances that can utilize gas and/or electrical energy to provide heat for cooking when the ovens are utilizing gas energy to provide heat for cooking, but not when electric energy is used to provide any or all of the heat for cooking in the oven.It is not applicable to:- microwave combination ovens;- small cavities ovens (3.2);- oven cavities not provided with devices to detect and control the temperature for the preparation of food;- cooking modes others than defined in 3.1.1 and 3.1.2;- ovens connected to a chimney in which the gas energy for cooking provides, by design, also space and/or water heating;!Deleted text"This European Standard is concerned neither with safety nor with overall performance requirements.
- Standard27 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard sets out the requirements and the test method for the rational use of energy of gas burning domestic cooking appliances, in accordance with EN 30 1-1:2008+A3:2013, Clause 1.
This European Standard covers type testing only.
NOTE The calorific values specified in this European Standard are based on the gross calorific value (Hs) as defined in EN 30–1-1:2008+A3:2013.
- Standard9 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft9 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Jun-2015
- 30-Dec-2015
- 97.040.20
- 2009/142/EC
- 66/2014
- M/495
- M/BC/CEN/89/6
- CEN/TC 49
This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases defined in EN 30-1-1:2008+A2:2010, that have one or more burners with an automatic burner control system, referred to in the text as "appliances".
This European Standard includes specific requirements and methods of test that are applicable to burners having an automatic burner control system, whether or not the appliance is equipped with a fan for the supply of combustion air to, and/or the evacuation of the products of combustion from the burner concerned. These specific requirements and methods of test are only applicable when the burner has an automatic burner control system and do not apply to burners having automatic ignition that fall within the scope of
EN 30-1-1:2008+A2:2010.
This European Standard is intended to be used in conjunction with EN 30-1-1:2008+A2:2010 and, where appropriate, other parts of EN 30-1 covering appliances having:
- forced-convection ovens and/or grills;
- a glass ceramic hotplate.
It does not cover all of the safety requirements and methods of test that are specific to forced-convection ovens and/or grills and glass ceramic hotplates.
Unless specifically excluded hereafter, this standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e.g. combined gas-electric cookers).
This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically heated component parts of their associated equipment ).
This European Standard does not apply to:
- outdoor appliances;
- appliances connected to a combustion products evacuation duct;
- appliances having a pyrolytic gas oven;
- appliances having automatic burner control systems that:
- have a second safety time (see EN 298:2003), or
- control one or more burners that incorporate a separate ignition burner;
- appliances having an uncovered burner or a non-enclosed covered burner (see 3.1.1) that utilises a fan for the supply of its combustion air;
- appliances having enclosed covered burners that are not equipped with an automatic burner control system;
- appliances having one or more burners that are capable of remote operation (type1), unless the burner(s) concerned are:
- oven burners equipped with an automatic burner control system, or
- oven burners of time-controlled ovens that are designed for a delayed start without the user being present;
- appliances having one or more burners that are capable of remote operation (type 2), unless the burner(s) concerned are:
- oven, grill or hotplate burners equipped with automatic burner control systems, or
- oven burners of time-controlled ovens that are designed for a delayed start without the user being present;
- appliances supplied at pressures greater than those defined in 7.1.3;
- appliances equipped with air-gas ratio controls;
- appliances incorporating one or more hotplate or grill burners that enable the user to program the delayed start of a cooking cycle.
This European Standard does not cover the requirements relating to automatic on-off cycling multi-ring hotplate burners for which specific requirements are under consideration.
This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.
This European Standard only covers type testing.
- Standard102 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft100 pagesEnglish languagesale 10% offe-Library read for×1 day
- 22-May-2012
- 29-Nov-2012
- 97.040.20
- 2009/142/EC
- 90/396/EEC
- M/BC/CEN/89/6
- CEN/TC 49
This standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases defined in EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999, having one or more enclosed covered burners under a glass ceramic panel, referred to in the text as "appliances".
This standard is intended to be used in conjunction with EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999 or EN 30 1 4:2002, and, where appropriate, EN 30-2-1:1999.
It does not cover all of the safety requirements and methods of test that are specific to forced convection ovens and/or grills.
Unless excluded specifically hereafter, this standard covers appliances or their components, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e.g. gas-electric-cookers).
This standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with gas. It does not include requirements covering the electrical safety of electrically-heated component parts of their associated equipment ).
This Standard does not apply to:
- outdoor appliances;
- appliances connected to a combustion products evacuation duct;
- appliances having a pyrolytic gas oven;
- appliances having automatic burner control systems that
- have a second safety time, or
- control one or more burners that incorporate a separate ignition burner;
- appliances having an uncovered burner or a non-enclosed covered burner;
- appliances equipped with air-gas ratio controls;
- appliances with more than one fan for the supply of combustion air and/or for the evacuation of products of combustion from a combustion chamber;
- appliances supplied at pressures greater than those defined in 7.1.2.
This standard does not cover the requirements relating to third family ga
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
This standard sets out the requirements and test method for the rational use of energy of gas cooking appliances having forced-convection ovens and/or grills using combustible gases described in clause 1 of EN 30-1-2:1999. This standard covers only type testing. NOTE: The calorific values given in this standard are based on the gross calorific value (Hs) as defined in EN 30-1-2:1999.
- Standard6 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Jul-1999
- 30-Jan-2000
- 97.040.20
- 2009/142/EC
- 90/396/EEC
- M/BC/CEN/89/6
- CEN/TC 49
This European Standard sets out the requirements and the test method for the rational use of energy of gas burning domestic cooking appliances, in accordance with EN 30-1-1:2021, Clause 1.
This European Standard covers type testing only.
NOTE The calorific values specified in this European Standard are based on the gross calorific value (Hs) as defined in EN 30–1-1:2008+A3:2013.
- Draft10 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases defined in EN 30-1-1:2008+A2:2010, that have one or more burners with an automatic burner control system, referred to in the text as "appliances".
This European Standard includes specific requirements and methods of test that are applicable to burners having an automatic burner control system, whether or not the appliance is equipped with a fan for the supply of combustion air to, and/or the evacuation of the products of combustion from the burner concerned. These specific requirements and methods of test are only applicable when the burner has an automatic burner control system and do not apply to burners having automatic ignition that fall within the scope of
EN 30-1-1:2008+A2:2010.
This European Standard is intended to be used in conjunction with EN 30-1-1:2008+A2:2010 and, where appropriate, other parts of EN 30-1 covering appliances having:
- forced-convection ovens and/or grills;
- a glass ceramic hotplate.
It does not cover all of the safety requirements and methods of test that are specific to forced-convection ovens and/or grills and glass ceramic hotplates.
Unless specifically excluded hereafter, this standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e.g. combined gas-electric cookers).
This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically heated component parts of their associated equipment ).
This European Standard does not apply to:
- outdoor appliances;
- appliances connected to a combustion products evacuation duct;
- appliances having a pyrolytic gas oven;
- appliances having automatic burner control systems that:
- have a second safety time (see EN 298:2003), or
- control one or more burners that incorporate a separate ignition burner;
- appliances having an uncovered burner or a non-enclosed covered burner (see 3.1.1) that utilises a fan for the supply of its combustion air;
- appliances having enclosed covered burners that are not equipped with an automatic burner control system;
- appliances having one or more burners that are capable of remote operation (type1), unless the burner(s) concerned are:
- oven burners equipped with an automatic burner control system, or
- oven burners of time-controlled ovens that are designed for a delayed start without the user being present;
- appliances having one or more burners that are capable of remote operation (type 2), unless the burner(s) concerned are:
- oven, grill or hotplate burners equipped with automatic burner control systems, or
- oven burners of time-controlled ovens that are designed for a delayed start without the user being present;
- appliances supplied at pressures greater than those defined in 7.1.3;
- appliances equipped with air-gas ratio controls;
- appliances incorporating one or more hotplate or grill burners that enable the user to program the delayed start of a cooking cycle.
This European Standard does not cover the requirements relating to automatic on-off cycling multi-ring hotplate burners for which specific requirements are under consideration.
This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.
This European Standard only covers type testing.
- Draft87 pagesEnglish languagesale 10% offe-Library read for×1 day
- 16-Apr-2023
- 97.040.20
- 2016/426
- M/595
- M/BC/CEN/89/6
- CEN/TC 49
This document specifies the requirements and test method for the rational use of energy of gas cooking appliances having forced-convection ovens and/or grills using combustible gases described in Clause 1 of EN 30 1 2:2012.
This document covers only type testing.
- Draft6 pagesEnglish languagesale 10% offe-Library read for×1 day
- 07-Jul-2022
- 08-Jan-2023
- 97.040.20
- 2016/426
- 2016/426/EU
- M/595
- M/BC/CEN/89/6
- CEN/TC 49
Amendment A3 to EN 30-1-1:2008+A2:2010
- Draft8 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.