iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 683-2:2024

(Main)

Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 2: Mechanische Eigenschaften

Dieses Dokument legt die mechanischen Eigenschaften von Vormaterial für Wärmeaustauscher aus Aluminium und Aluminium-Knetlegierungen fest.
Die Grenzwerte für die chemischen Zusammensetzungen dieser Werkstoffe sind in EN 573 3 festgelegt, sofern zwischen dem Lieferanten und dem Käufer nichts anderes vereinbart wurde.
Die in diesem Dokument verwendeten Bezeichnungen für Aluminium und Aluminium-Knetlegierungen sind in EN 573 3 festgelegt und die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert.

Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 : Caractéristiques mécaniques

Le présent document spécifie les caractéristiques mécaniques des bandes pour échangeurs thermiques en aluminium et alliages d'aluminium corroyés.
Les limites de la composition chimique de ces matériaux sont données dans l‘EN 573-3, sauf accord contraire entre le fournisseur et l’acheteur.
La désignation de l'aluminium et des alliages d'aluminium, ainsi que la désignation des états métallurgiques utilisées dans le présent document sont spécifiées dans l'EN 573-3 et la désignation des états métallurgiques est définie dans l'EN 515.

Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 2. del: Mehanske lastnosti

General Information

Status
Published
Publication Date
02-Apr-2024
ICS
77.120.10 - Aluminium and aluminium alloys
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132 - Aluminium and aluminium alloys
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Apr-2024
Due Date
12-Aug-2024
Completion Date
03-Apr-2024
Ref Project
kSIST FprEN 683-2:2024 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties

Relations

Replaces
EN 683-2:2006 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Effective Date
11-May-2022

Buy Standard

prEN 683-2:2023prEN 683-2:2023
PreviousNext
Draft
prEN 683-2:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 683-2:2023
01-junij-2023
Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike
- 2. del: Mehanske lastnosti
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: prEN 683-2
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 683-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 683-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 683-2:2023


DRAFT
EUROPEAN STANDARD
prEN 683-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2023
ICS Will supersede EN 683-2:2006
English Version

Aluminium and aluminium alloys - Finstock - Part 2:
Mechanical properties
Aluminium et alliages d'aluminium - Bandes pour Aluminium und Aluminiumlegierungen - Vormaterial
échangeurs thermiques - Partie 2 : Caractéristiques für Wärmeaustauscher (Finstock) - Teil 2: Mechanische
mécaniques Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 683-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 683-2:2023
prEN 683-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Tensile testing . 4
5 Mechanical properties . 6
6 Rounding of test results . 6
Annex A (normative) Rules for rounding .11
Bibliography .12

2

---------------------- Page: 4 ----------------------
oSIST prEN 683-2:2023
prEN 683-2:2023 (E)
European foreword
This document (prEN 683-2:2023) has been prepared by Technical Committee CEN/TC 132 “Aluminium
and aluminium alloys”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 573-3:2019+A2:2023(Main)
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
SIST EN 573-3:2019+A2:2024

This document specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
NOTE The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminium Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14242:2023(Main)
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
SIST EN 14242:2023

This document specifies an inductively coupled plasma optical emission spectrometric method
(ICP-OES) for the analysis of aluminium and aluminium alloys.
This method is applicable to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
The content of the elements to be determined should be at least 10 times higher than the corresponding detection limits.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1676:2020(Main)
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
SIST EN 1676:2020

This document defines the requirements for grades of alloyed aluminium ingots intended for remelting.
It specifies the classifications and designations applicable to these grades, the conditions in which they are produced, their properties and the marks by which they are identified.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14726:2019(Main)
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
SIST EN 14726:2019

This document describes the criteria and the procedure for analysing aluminium and aluminium alloys with spark optical emission spectrometry (S-OES). The scope of this document covers the following:
-   sample preparation;
-   operational guidelines for an optical emission spectrometer (including maintenance);
-   traceability of the analytical results to the International System of units: mass (kg);
-   assessing the uncertainty associated with each analytical result.
This document refers to simultaneous spark emission spectrometers for the analysis of solid samples.
It applies to the determination of silicon, iron, copper, manganese, magnesium, chromium, nickel, zinc, titanium, boron, gallium, vanadium, beryllium, bismuth, calcium, cadmium, cobalt, lithium, sodium, phosphorus, lead, antimony, tin, strontium and zirconium in aluminium and aluminium alloys.
Elements other than those listed above may be analysed on the condition that:
a) suitable reference materials are available; and
b) the instrument is suitably calibrated and equipped.
In the case of determining mercury, for compliance purposes an alternate method with a limit of quantification < 0,000 1 % is recommended as its detection is compromised by intense iron interference at 253,65 nm.
The test result obtained from a spark optical emission spectrometer generally concerns an amount of less than one milligram per spark spot. The result can be used to refer to the laboratory test sample, to the aluminium or aluminium alloy melt or to the cast product.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 515:2017(Main)
Aluminium and aluminium alloys - Wrought products - Temper designations
SIST EN 515:2017

This European Standard establishes temper designations for all forms of wrought aluminium and aluminium alloys and for continuously cast aluminium and aluminium alloys drawing stock and strip intended to be wrought.
NOTE   Some of these temper designations may be subject of patent or patent applications and their listing herein is not to be construed in any way as the granting of a license under such patent right.
Additional temper designations, conforming to this standard, may be standardized with CEN/TC 132 and AECMA/5 provided:
-   the temper is used or is available for use by more than one user;
-   mechanical property limits are defined;
-   the characteristics of the temper are significantly different from those of all other tempers which have the same sequence of basic treatments and for which designations already have been assigned for the same alloy and product;
-   the following are also defined if characteristics other than mechanical properties are considered significant:
a)   test methods and limits for the characteristics; or
b)   the specific practices used to produce the temper.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 755-9:2016(Main)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
SIST EN 755-9:2016

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm (see Figure 1).
The temper designations used in this part are according to EN 515.
This European Standard applies to extruded profiles for general engineering applications only.
(...)

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16748:2014(Main)
Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
SIST-TP CEN/TR 16748:2015

This Technical Report presents the characteristics of reference dies and reference castings, to be used for evaluating the mechanical potential (in terms of Ultimate Tensile Strength, Yield Strength and Elongation) which can be expected by Al-Si based alloys, cast by high pressure, low pressure and gravity (permanent mould) processes. These properties are measured on separately cast test specimens produced with state-of-the-art knowledge on die design, process management and alloy treatments correctly applied to minimize defects and imperfections.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16749:2014(Main)
Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products
SIST-TP CEN/TR 16749:2015

This Technical Report specifies the classification of the defects and imperfections may be present in cast products manufactured by high pressure, low pressure and gravity die casting of aluminium alloys.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12258-1:2012(Main)
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
SIST EN 12258-1:2012

This European Standard defines general terms relating to products of aluminium and aluminium alloys which are helpful for communication within the aluminium industry and with its customers .
It includes terms dealing with aluminium products, processing, sampling and testing, product characteristics and different types of visual quality characteristics.
It does not include terms dealing with bauxite mining, alumina and anode production and aluminium smelting.
This European Standard tries to adhere as closely as possible to the terms and definitions used in other standards or documents.
NOTE   For materials other than aluminium, different definitions can apply to terms which are defined in this document.
This European Standard tries to follow the "common language" as it is used in native English speaking countries, without giving preference to specific idioms of any one of these counties. In cases where in different English-speaking countries different terms are used for the same concept or different concepts refer to an identical term, the appropriate explanations are given.

  • Standard
    180 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 754-4:2008(Main)
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
SIST EN 754-4:2008

This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn square bars having widths across flats from 3 mm up to and including 100 mm.
The temper designations used in this part are according to EN 515.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day