iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 17075:2018/FprA1

(Amendment)

Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices

Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices

This European Standard specifies general requirements and performance test procedures for portable and fixed position measuring devices (MDs) that are used in an in-line or online operating position to measure physical and chemical determinands in water. It excludes at-line devices, such as chemical test kits, and off-line devices, such as laboratory analysers.
The general requirements include functional facilities that MDs need to meet users’ applications and information that need to be included in associated documents.
The test procedures specify uniform methods to be used when determining key performance characteristics of MDs. The performance tests comprise testing carried out under laboratory and field conditions.
Statistical procedures are defined for evaluation of the test data. It is recognized that for some devices certain test procedures are not applicable.
Example values for performance characteristics for a selection of MDs for monitoring waste water effluents and receiving waters are detailed in Annex A for guidance.
This European Standard requires the manufacturer of a MD to provide more technical data for verification than does EN ISO 15839:2006 [5]. Consequently, EN ISO 15839 will be of greater assistance to manufacturers wishing to characterize a new device whereas this European Standard is more focussed on user requirements for the verification of manufacturer’s claims.

Wasserbeschaffenheit - Allgemeine Anforderungen und Testverfahren zur Leistungsprüfung von Geräten zum Wassermonitoring - Kontinuierliche Messgeräte

Qualité de l'eau - Exigences générales et modes opératoires d'essai de performance pour les équipements de surveillance de l'eau - Dispositifs de mesure en continue

Kakovost vode - Splošne zahteve in postopki preskušanja zmogljivosti opreme za monitoring vode - Merilniki za kontinuirano merjenje

General Information

Status
Not Published
Publication Date
20-Jun-2023
ICS
13.060.45 - Examination of water in general
Technical Committee
CEN/TC 230 - Water analysis
Drafting Committee
CEN/TC 230/WG 4 - Performance Requirements for Water Monitoring Equipment
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
19-Jan-2023
Due Date
31-Mar-2023
Completion Date
19-Jan-2023
Directive
2000/60/EC - Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy (substitutes Directive Reference 01/991 - Common Position on WFD)
Ref Project
SIST EN 17075:2019/kFprA1:2022 - Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices

Relations

Merged Into
EN 17075:2018+A1:2023 - Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices
Effective Date
28-Jan-2023
Amends
EN 17075:2018 - Water quality - General requirements and performance test procedures for water monitoring equipment - Measuring devices
Effective Date
17-Mar-2021

Buy Standard

EN 17075:2019/oprA1:2022EN 17075:2019/oprA1:2022
PreviousNext
Draft
EN 17075:2019/oprA1:2022
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17075:2019/oprA1:2022
01-februar-2022
Kakovost vode - Splošne zahteve in postopki preskušanja zmogljivosti opreme za
monitoring vode - Merilniki za kontinuirano merjenje
Water quality - General requirements and performance test procedures for water
monitoring equipment - Continuous measuring devices
Wasserbeschaffenheit - Allgemeine Anforderungen und Testverfahren zur
Leistungsprüfung von Geräten zum Wassermonitoring - Kontinuierliche Messgeräte
Qualité de l'eau - Exigences générales et modes opératoires d'essai de performance
pour les équipements de surveillance de l'eau - Dispositifs de mesure continue
Ta slovenski standard je istoveten z: EN 17075:2018/prA1
ICS:
13.060.45 Preiskava vode na splošno Examination of water in
general
SIST EN 17075:2019/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17075:2019/oprA1:2022

---------------------- Page: 2 ----------------------
SIST EN 17075:2019/oprA1:2022


DRAFT
EUROPEAN STANDARD
EN 17075:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
January 2022
ICS 13.060.45
English Version

Water quality - General requirements and performance
test procedures for water monitoring equipment -
Continuous measuring devices
Qualité de l'eau - Exigences générales et modes Wasserbeschaffenheit - Allgemeine Anforderungen und
opératoires d'essai de performance pour les Testverfahren zur Leistungsprüfung von Geräten zum
équipements de surveillance de l'eau - Dispositifs de Wassermonitoring - Kontinuierliche Messgeräte
mesure continue
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 230.

This draft amendment A1, if approved, will modify the European Standard EN 17075:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17075:2018/prA1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17075:2019/oprA1:2022
EN 17075:2018/prA1:2022
Contents Page
European foreword . 3
1 Modification to the Title . 4
2 Modification to the whole document . 4
3 Modification to Clause 3, "Terms and definitions". 4
4 Modifications to Clause 4, "Symbols" . 4
5 Modification to Clause 6, "General requirements" . 4
6 Modification to Clause 7, "Performance characteristics" . 4
7 Modifications to Clause 9, "Laboratory test procedures" . 4
8 Modifications to Annex B, "Evaluation of performance test data" . 5
9 Modifications to Annex C, "Example calculation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16479:2023(Main)
Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automatic sampling devices (samplers) for water and waste water
SIST EN 16479:2023

This document specifies general requirements, performance requirements and conformity test procedures for automatic sampling devices (samplers) for water and waste water that:
—   sample water and waste water from non-pressurized (i.e. open to atmosphere) channels or vessels;
—   sample over extended periods to collect discrete or composite samples based on time, event or flow proportional sampling.
It does not include sampling systems built into online and in-line analysers.
The general requirements include functional facilities that samplers need to meet users’ applications and information that needs to be included in associated documents.
The test procedures specify uniform methods to be used when determining key performance characteristics of samplers at one or more set sample volume. It is for the sampler manufacturer and/or user to decide on the required set sample volume(s). All of the test procedures are to be carried out under laboratory conditions. It is recognized that for some samplers, certain test procedures are not applicable.
Statistical procedures are specified for evaluation of the test data. Some example calculations are provided.
Specific sample integrity requirements are specified for samplers to be used for the collection of samples of final effluent or influent for the purpose of monitoring the performance of urban waste water treatment works. Samplers to be used for other industrial applications do not need to be assessed against these specific sample integrity requirements.
This document does not cover the installation and on-going use of samplers.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-1:2023(Main)
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2023)
SIST EN ISO 5667-1:2023

This document sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents, suspended solids and sediments).
This document does not include detailed instructions for specific sampling situations, which are covered in various other parts of the ISO 5667 series and in ISO 19458.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17075:2018+A1:2023(Main)
Water quality - General requirements and performance test procedures for water monitoring equipment - Continuous measuring devices
SIST EN 17075:2019+A1:2023

This European Standard specifies general requirements and performance test procedures for portable and fixed position measuring devices (MDs) that are used in an in-line or online operating position to measure physical and chemical determinands in water. It excludes at-line devices, such as chemical test kits, and off-line devices, such as laboratory analysers.
The general requirements include functional facilities that MDs need to meet users’ applications and information that need to be included in associated documents.
The test procedures specify uniform methods to be used when determining key performance characteristics of MDs. The performance tests comprise testing carried out under laboratory and field conditions.
Statistical procedures are defined for evaluation of the test data. It is recognized that for some devices certain test procedures are not applicable.
Example values for performance characteristics for a selection of MDs for monitoring waste water effluents and receiving waters are detailed in Annex A for guidance.
This European Standard requires the manufacturer of a MD to provide more technical data for verification than does EN ISO 15839:2006 [5]. Consequently, EN ISO 15839 will be of greater assistance to manufacturers wishing to characterize a new device whereas this European Standard is more focussed on user requirements for the verification of manufacturer’s claims.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-6:2016/A11:2020(Amendment)
Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014)
SIST EN ISO 5667-6:2017/A11:2020
  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-3:2018(Main)
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018)
SIST EN ISO 5667-3:2018

This document specifies general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses.
It is not applicable to water samples intended for microbiological analyses as specified in ISO 19458, ecotoxicological assays, biological assays and passive sampling as specified in the scope of ISO 5667‑23.
This document is particularly appropriate when spot or composite samples cannot be analysed on site and have to be transported to a laboratory for analysis.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-16:2017(Main)
Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
SIST EN ISO 5667-16:2017

ISO 5667-16:2017 gives practical guidance on sampling, pre-treatment, performance and evaluation of environmental samples in the context of performing biological tests. Information is given on how to cope with the problems of biotesting arising from the sample and the suitability of the test design.
It is intended to convey practical experience concerning precautions to be taken by describing methods successfully proven to solve or to circumvent some of the experimental problems of biotesting of, for example, waters.
Primarily dealt with are substance-related problems concerning sampling and pre-treatment of environmental samples (e.g. waste water samples) for the performance of biotests.
This guidance is on ecotoxicological testing with organisms (single-species biotests; in vivo and in vitro). Some features addressed in this document also apply to biotests using single-cell systems (in vitro bioassays) and biodegradation studies as far as sampling and sample preparations are concerned. Testing of substances in the water solubility range is also addressed.
Reference has been made as far as possible to existing International Standards and guidelines. Information taken from published papers or oral communication has been utilized as well.
ISO 5667-16:2017 is applicable to biological tests for determining the effect of environmental samples like treated communal and industrial waste water, groundwater, fresh water, aqueous extracts (e.g. leachates, eluates), pore water of sediments and whole sediments. This document is also applicable to chemical substances.
ISO 5667-16:2017 is not applicable to bacteriological examination of water. Appropriate methods for bacteriological examination are described in other documents (see ISO 19458[17]).

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16870:2017(Main)
Water quality - Guidance standard on determining the degree of modification of lake hydromorphology
SIST EN 16870:2017

This European Standard provides guidance on determining the degree of modification of lake hydromorphological features described in EN 16039. It enables consistent comparisons of hydromorphology between lakes within a country and between different countries in Europe, providing a method for broad based characterization across a wide spectrum of hydromorphological modification. Its primary aim is to assess ‘departure from naturalness’ for a given type of lake as a result of human pressures, and it suggests suitable sources of information that may contribute to characterizing the degree of modification of hydromorphological features. For wholly artificial lakes or reservoirs formed by damming rivers the aim is to assess the extent to which processes approximate to those in comparable natural water bodies. However, this standard does not replace methods that have been developed within particular countries for local assessment and reporting. Decisions on management for individual lakes require expert local knowledge and vary according to lake type.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-6:2016(Main)
Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014)
SIST EN ISO 5667-6:2017

ISO 5667-6:2014 sets out the principles to be applied to the design of sampling programmes, sampling techniques, and the handling of water samples from rivers and streams for physical and chemical assessment.
It is not applicable to the sampling of estuarine or coastal waters nor for microbiological sampling. (Procedures for microbiological sampling are given in ISO 19458.)
ISO 5667-6:2014 is neither applicable to the examination of sediment, suspended solids or biota, nor to dammed stretches of rivers or streams. Also, it is not applicable to passive sampling of surface waters (see ISO 5667‑23).
In cases where naturally occurring or artificially constructed dams result in the retention or storage of water for several days or more, the stretch of the river or stream should be considered as a standing water body. For sampling purposes, see ISO 5667‑4.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5667-14:2016(Main)
Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014)
SIST EN ISO 5667-14:2017

ISO 5667-14:2014 provides guidance on the selection and use of various quality assurance and quality control techniques relating to the manual sampling of surface, potable, waste, marine and ground waters.
NOTE          The general principles outlined in this part of ISO 5667 might, in some circumstances, be applicable to sludge and sediment sampling.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16260:2012(Main)
Water quality - Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data
SIST EN 16260:2013

This European Standard describes methods, requirements and equipment for remote visual surveillance of organisms and the seabed using still photography and video recording to ensure precise and reproducible data. The main aims of the methods are to record or monitor seabed conditions and organisms on and just above the seabed in a reproducible way at a resolution that is appropriate to the aims of the survey.
In caves and overhangs this standard may not be suitable due to technological limitations related to navigation and movement of the observation platform.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day