Gypsum binders and gypsum plasters - Part 1: Definitions and requirements

This document specifies the characteristics and performance of powder products based on gypsum binder for building purposes. This includes premixed gypsum building plasters for plastering of walls and ceilings inside buildings where they are applied as a finishing material which can be decorated. These products are specially formulated to meet their application requirements by the use of additives/admixtures, aggregates and other binders. Gypsum and gypsum based building plasters for manual and mechanical applications are included.
This document also applies to gypsum binders both for direct use on site and for further processing into gypsum blocks, gypsum plasterboards, gypsum boards with fibrous reinforcement, gypsum fibrous plasterwork and gypsum ceiling elements. Gypsum mortar for internal not load bearing partitions not exposed to water is also included.
Calcium sulfate used as binder for floor screeds is not covered by this document.
This document defines the reference tests for technical characteristics and provides for the assessment and verification of constancy of performance of the products covered by this European Standard.
Building lime, as calcium hydroxide, can be used as an additional binder together with gypsum binder. If gypsum binder is the principle active binding component in a plaster then this plaster is covered by this European Standard. If building lime is the principle active binding component in a plaster then the plaster is covered by EN 998 1.

Gipsbinder und Gips-Trockenmörtel - Teil 1: Begriffe und Anforderungen

Diese Europäische Norm legt die Eigenschaften und Leistungsmerkmale pulverförmiger Produkte auf Gipsbinderbasis für Anwendungen in Bauwerken fest. Dies schließt werkgemischte Gips-Trockenmörtel (Werktrockenmörtel) zum Verputz von Decken und Wänden innerhalb von Gebäuden ein, die eine fertige Oberfläche bilden, die weiter behandelt werden kann. Diese Produkte werden unter Verwendung von Zusatzstoffen/Zusatzmitteln, Zuschlägen und anderen Bindemitteln anforderungsbezogen hergestellt. Die Norm umfasst Gips Putztrockenmörtel und gipshaltige Putztrockenmörtel für die manuelle und mechanische Verarbeitung.
Diese Europäische Norm gilt auch für Gipsbinder sowohl zur Direktanwendung auf der Baustelle als auch zur Weiterverarbeitung zu Gips Wandbauplatten, Gipsplatten, faserverstärkten Gipsplatten, Formteilen aus faserverstärktem Gips und Gipselementen für Unterdecken sowie für Gipsmörtel für nichttragende Trennwände im Inneren von Gebäuden, die nicht mit Wasser in Berührung kommen.
Calciumsulfat Binder für Estriche werden von dieser Europäischen Norm nicht erfasst.
Diese Europäische Norm legt die Referenzprüfverfahren für technische Merkmale fest und schafft die Voraussetzung für die Bewertung der Konformität der von dieser Norm erfassten Produkte.
Baukalk (als Calciumhydroxyd) kann als zusätzliches Bindemittel zusammen mit Gipsbinder verwendet werden. Wenn Gipsbinder das aktive Hauptbindemittel ist, wird der betreffende Gips-Putztrockenmörtel von dieser Europäischen Norm erfasst. Ist Baukalk das aktive Hauptbindemittel gilt für den Putztrockenmörtel die Norm EN 998-1.

Liants-plâtres et enduits à base de plâtre - Partie 1 : Définitions et exigences

La présente Norme européenne spécifie les caractéristiques et les performances des produits en poudre à base de liant plâtre utilisés dans le domaine du bâtiment. Sont inclus les plâtres de construction pré-mélangés utilisés comme enduits sur les murs et plafonds à l’intérieur des constructions, appliqués sous forme de finitions aptes à recevoir une décoration. Ces produits sont formulés spécialement pour répondre aux exigences de l’utilisation grâce à l’ajout d’additifs/adjuvants, de granulats et d’autres liants. La norme couvre les plâtres de construction et les enduits à base de plâtre destinés aux applications manuelles et mécaniques.
La présente Norme européenne s’applique également aux liants-plâtres destinés à l’usage direct sur le chantier et à la transformation ultérieure en carreaux, plaques de plâtre, plaques de plâtre armées de fibres, ouvrages en staff et éléments de plafonds en plâtre. Le mortier de plâtre utilisé pour le montage de cloisons intérieures non porteuses et non exposées à l’eau est également inclus.
La présente Norme européenne ne concerne pas le sulfate de calcium utilisé comme liant pour les chapes de sols.
La présente Norme européenne définit les essais de référence concernant les caractéristiques techniques et permet l’évaluation de la conformité des produits couverts par la présente Norme européenne.
La chaux de construction, sous forme d’hydroxyde de calcium, est utilisable comme liant complémentaire avec un liant-plâtre. Si ce dernier constitue l’élément principal actif d’un enduit, alors cet enduit est couvert par la présente Norme européenne. Si la chaux de construction constitue l’élément principal actif de l’enduit, alors cet enduit est couvert par l’EN 998-1.

Mavčna veziva in mavčni notranji ometi - 1. del: Definicije in zahteve

General Information

Status
Not Published
Publication Date
03-Mar-2019
Withdrawal Date
03-Sep-2019
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
22-May-2019

Relations

Buy Standard

Draft
prEN 13279-1:2017
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13279-1:2017
01-oktober-2017
0DYþQDYH]LYDLQPDYþQLQRWUDQMLRPHWLGHO'HILQLFLMHLQ]DKWHYH
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
Gipsbinder und Gips-Trockenmörtel - Teil 1: Begriffe und Anforderungen
Liants-plâtres et enduits à base de plâtre - Partie 1 : Définitions et exigences
Ta slovenski standard je istoveten z: prEN 13279-1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
oSIST prEN 13279-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13279-1:2017

---------------------- Page: 2 ----------------------
oSIST prEN 13279-1:2017


DRAFT
EUROPEAN STANDARD
prEN 13279-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2017
ICS 01.040.91; 91.100.10 Will supersede EN 13279-1:2008
English Version

Gypsum binders and gypsum plasters - Part 1: Definitions
and requirements
Liants-plâtres et enduits à base de plâtre - Partie 1 : Gipsbinder und Gips-Trockenmörtel - Teil 1: Begriffe
Définitions et exigences und Anforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 241.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13279-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13279-1:2017
prEN 13279-1:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Types of gypsum binders and gypsum plasters . 7
5 Requirements . 8
5.1 Requirements linked to the end use conditions . 8
5.1.1 Reaction to fire . 8
5.1.2 Fire resistance . 9
5.1.3 Acoustic performance . 9
5.1.4 Thermal resistance . 9
5.1.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.