FprEN 16809-1

Thermal insulation products for buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose filled products before installation

This European Standard specifies the requirements for expanded polystyrene (EPS) beads and the adhesive, which are after installation used for the thermal insulation of buildings. The EPS beads and the adhesive are mixed and processed on site.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
This standard does not cover factory made insulation products in the form of prefabricated shapes or boards made of bonded EPS beads.
Products with a declared thermal resistance lower than 0,25 (m² x K)/W or a declared thermal conductivity at 10 °C greater than 0,1 W/(m x K) are not covered by this standard.

Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Produkte aus losen expandierten Polystyrolkugeln (EPS) und gebundenen Polystyrolkugeln - Teil 1: Spezifikation für gebundene und lose Schütt- und Einblasdämmstoffe vor dem Einbau

Produits isolants thermiques destinés aux bâtiments - Produits formés sur place à partir de billes en polystyrène expansé (PSE) en vrac et de billes en polystyrène expansé liées - Partie 1: Spécification pour les produits liés et en vrac avant mise en œuvre

Toplotnoizolacijski proizvodi za stavbe - Proizvodi, izdelani na mestu vgradnje iz nasutih nevezanih in vezanih kroglic iz ekspandiranega polistirena (EPS) - 1. del: Specifikacija za nevezane in vezane nasute proizvode pred vgradnjo

General Information

• Status: Not Published
• Publication Date: 28-Aug-2016
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 15 - In situ formed insulation products
• Current Stage: 4598 - Decision to abandon - Finalization for Vote
• Completion Date: 10-Mar-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: oSIST prEN 16809-1:2015 - Thermal insulation products for buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose filled products before installation

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16809-1:2015
01-marec-2015
Toplotnoizolacijski proizvodi za stavbe - Proizvodi, izdelani na mestu vgradnje iz
nasutih nevezanih in vezanih kroglic iz ekspandiranega polistirena (EPS) - 1. del:
Specifikacija za nevezane in vezane nasute proizvode pred vgradnjo
Thermal insulation products for buildings - In-situ formed products from loose-fill
expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1:
Specification for the bonded and loose filled products before installation
Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Produkte aus
losen expandierten Polystyrolkugeln (EPS) und gebundenen Polystyrolkugeln - Teil 1:
Spezifikation für gebundene und lose Schütt- und Einblasdämmstoffe vor dem Einbau
Produits isolants thermiques destinés aux bâtiments - Produits formés sur place à partir
de billes en polystyrène expansé (PSE) en vrac et de billes en polystyrène expansé liées
- Partie 1: Spécification pour les produits liés et en vrac avant mise en œuvre
Ta slovenski standard je istoveten z: prEN 16809-1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN 16809-1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16809-1:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16809-1:2015

EUROPEAN STANDARD
DRAFT
prEN 16809-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2014
ICS 91.100.60
English Version
Thermal insulation products for buildings - In-situ formed
products from loose-fill expanded polystyrene (EPS) beads and
bonded expanded polystyrene beads - Part 1: Specification for
the bonded and loose filled products before installation
Produits isolants thermiques destinés aux bâtiments - Wärmedämmstoffe für Gebäude - An der
Produits formés sur place à partir de billes en polystyrène Verwendungsstelle hergestellte Produkte aus losen
expansé (PSE) en vrac et de billes en polystyrène expansé expandierten Polystyrolkugeln (EPS) und gebundenen
liées - Partie 1: Spécification pour les produits liés et en Polystyrolkugeln - Teil 1: Spezifikation für gebundene und
vrac avant mise en œuvre lose Schütt- und Einblasdämmstoffe vor dem Einbau
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16809-1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16809-1:2015
prEN 16809-1:2014 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms, definitions, symbols and abbreviations .6
3.1 Terms and definitions .
...