prEN 1288-3 rev
(Main)Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014)
Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014)
Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3: Essais avec éprouvettes supportées en deux points (flexion quatre points)
Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 3: Prüfung von Proben bei zweiseitiger Auflagerung (Vierschneiden-Verfahren) (ISO/DIS 1288-3:2014)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Biegefestigkeit von Flachglas im Bauwesen unter Einschluss der Glaskanten fest. Das festgelegte Verfahren kann auch nur zur Bestimmung der Biegefestigkeit der Glaskanten angewendet werden.
Die Grenzen der Anwendbarkeit dieses Teiles der Norm sind in ISO 1288 1 beschrieben.
ISO 1288 1 sollte in Verbindung mit diesem Teil der Norm gelesen werden.
Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 3: Essais avec éprouvettes supportées en deux points (flexion quatre points) (ISO/DIS 1288-3:2014)
Steklo v gradbeništvu - Ugotavljanje upogibne trdnosti stekla - 3. del: Preskušanje dvakrat podprtega vzorca (štiritočkovna obremenitev) (ISO/DIS 1288-3:2014)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 1288-3:2014
01-april-2014
6WHNORYVWDYEDK8JRWDYOMDQMHXSRJLEQHWUGQRVWLVWHNODGHO 3UHVNXãDQMH
GYDNUDWSRGSUWHJDY]RUFD ãWLULWRþNRYQDREUHPHQLWHY ,62',6
Glass in building - Determination of the bending strength of glass - Part 3: Test with
specimen supported at two points (four-point bending) (ISO/DIS 1288-3:2014)
Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 3: Prüfung von
Proben bei zweiseitiger Auflagerung (Vierschneiden-Verfahren) (ISO/DIS 1288-3:2014)
Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie
3: Essais avec éprouvettes supportées en deux points (flexion quatre points) (ISO/DIS
1288-3:2014)
Ta slovenski standard je istoveten z: prEN ISO 1288-3 rev
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN ISO 1288-3:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 1288-3:2014
---------------------- Page: 2 ----------------------
oSIST prEN ISO 1288-3:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1288-3
ISO/TC 160/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2014-01-09 2014-06-09
Glass in building — Determination of the bending strength
of glass —
Part 3:
Test with specimen supported at two points (four-point
bending)
Verre dans la construction — Détermination de la résistance du verre à la flexion —
Partie 3: Essais avec éprouvettes supportées en deux points (flexion quatre points)
ICS: 81.040.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1288-3:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013
---------------------- Page: 3 ----------------------
oSIST prEN ISO 1288-3:2014
ISO/DIS 1288-3:2013(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 1288-3:2014
FDIS 1288-3
Contents
Foreword
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 2
5 Apparatus . 2
5.1 Testing machine .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.