EN ISO 12543-6:2021
(Main)Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
This document specifies defects of finished sizes and test methods with regard to the appearance of laminated glass and laminated safety glass when looking through the glass.
All references to laminated glass in this document refer to both laminated glass and laminated safety glass.
NOTE Special attention is paid to acceptability criteria in the vision area.
This document is applicable to finished sizes at the time of supply.
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 6: Aussehen (ISO 12543-6:2021)
Dieses Dokument legt Fehler von Endmaßen sowie Prüfverfahren für das Aussehen von Verbundglas und Verbund-Sicherheitsglas fest, wenn durch das Glas gesehen wird.
Alle Verweise auf Verbundglas in diesem Dokument beziehen sich sowohl auf Verbundglas als auch auf Verbundsicherheitsglas.
ANMERKUNG Besondere Aufmerksamkeit gilt den Annahmekriterien im Sichtfeld.
Das Dokument gilt für Endmaße zum Zeitpunkt der Lieferung.
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 6: Aspect (ISO 12543-6:2021)
Ce document spécifie les défauts de dimension des produits finis et les méthodes d’essai relatives à l’aspect du verre feuilleté et du verre feuilleté de sécurité par observation au travers du vitrage.
Toutes les références au verre feuilleté dans ce document se rapportent au verre feuilleté et au verre feuilleté de sécurité
NOTE Une attention particulière est portée aux critères d’acceptabilité dans la zone visible.
Ce document s’applique aux dimensions du produit fini au moment de la livraison.
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 6. del: Videz (ISO 12543-6:2021)
Ta dokument določa napake končnih velikosti in preskusne metode v zvezi z videzom lepljenega stekla in lepljenega varnostnega stekla pri gledanju skozi steklo. Vsi sklici na lepljeno steklo v tem dokumentu se navezujejo tako na lepljeno steklo kot lepljeno varnostno steklo. OPOMBA: Posebna pozornost je namenjena kriterijem sprejemljivosti v vidnem polju. Ta dokument se uporablja za končne velikosti v času dobave.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12543-6:2022
01-maj-2022
Nadomešča:
SIST EN ISO 12543-6:2012
SIST EN ISO 12543-6:2012/AC:2012
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 6. del: Videz
(ISO 12543-6:2021)
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance
(ISO 12543-6:2021)
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 6: Aussehen (ISO
12543-6:2021)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 6: Aspect
(ISO 12543-6:2021)
Ta slovenski standard je istoveten z: EN ISO 12543-6:2021
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-6:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12543-6:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 12543-6:2022
EN ISO 12543-6
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2021
EUROPÄISCHE NORM
ICS 81.040.20 Supersedes EN ISO 12543-6:2011, EN ISO 12543-
6:2011/AC:2012
English Version
Glass in building - Laminated glass and laminated safety
glass - Part 6: Appearance (ISO 12543-6:2021)
Verre dans la construction - Verre feuilleté et verre Glas im Bauwesen - Verbundglas und Verbund-
feuilleté de sécurité - Partie 6: Aspect (ISO 12543- Sicherheitsglas - Teil 6: Aussehen (ISO 12543-6:2021)
6:2021)
This European Standard was approved by CEN on 25 October 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12543-6:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12543-6:2022
EN ISO 12543-6:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12543-6:2022
EN ISO 12543-6:2021 (E)
European foreword
This document (EN ISO 12543-6:2021) has been prepared by Technical Committee ISO/TC 160 "Glass
in building" in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat
of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2022, and conflicting national standards shall be
withdrawn at the latest by June 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12543-6:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12543-6:2021 has been approved by CEN as EN ISO 12543-6:2021 without any
modification.
3
---------------------- Page: 5 ---------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.