Fixed, vertical road traffic signs - Part 4: Factory production control

This Part of EN 12899 describes the requirements for Factory production control (FPC), for Parts 1, 2 and 3 of EN 12899.

Ortsfeste, vertikale Straßenverkehrszeichen - Teil 4: Werkseigene Produktionskontrolle

Signalisation routière verticale - Signaux permanents fixes - Partie 4 : Contrôle de la production en usine

Stalna vertikalna cestna signalizacija - 4. del: Kontrola proizvodnje v tovarni

General Information

Status
Not Published
Publication Date
23-Jun-2013
Withdrawal Date
28-Feb-2014
Current Stage
5098 - Decision to abandon - Formal Approval
Start Date
27-Aug-2013
Completion Date
27-Aug-2013

Relations

Buy Standard

Draft
EN 12899-4:2008/kFprA1:2012
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12899-4:2008/kFprA1:2012
01-november-2012
Stalna vertikalna cestna signalizacija - 4. del: Kontrola proizvodnje v tovarni
Fixed, vertical road traffic signs - Part 4: Factory production control
Ortsfeste, vertikale Straßenverkehrszeichen - Teil 4: Werkseigene Produktionskontrolle
Signalisation routière verticale - Signaux permanents fixes - Partie 4 : Contrôle de la
production en usine
Ta slovenski standard je istoveten z: EN 12899-4:2007/FprA1
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 12899-4:2008/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12899-4:2008/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 12899-4:2008/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 12899-4:2007
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
September 2012
ICS 93.080.30
English Version
Fixed, vertical road traffic signs - Part 4: Factory production
control
Signalisation routière verticale - Signaux permanents fixes - Ortsfeste, vertikale Straßenverkehrszeichen - Teil 4:
Partie 4 : Contrôle de la production en usine Werkseigene Produktionskontrolle
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 226.

This draft amendment A1, if approved, will modify the European Standard EN 12899-4:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12899-4:2007/FprA1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12899-4:2008/kFprA1:2012
EN 12899-4:2007/FprA1:2012 (E)
Contents Page
Foreword . 3
1 Modifications to the Foreword . 4
2 Modifications to Clause 2 . 4
3 Modification to Clause 3 . 4
4 Modifications to 4.2 . 4
5 Modification to 4.5, 48, 4.9, 4.10 . 14

2

---------------------- Page: 4 ----------------------

SIST EN 12899-4:2008/kFprA1:2012
EN 12899-4:2007/FprA1:2012 (E)
Foreword
This document (EN 12899-4:2007/FprA1:2012) has been prepared by Technical Committee
CEN/TC 226 “Road equipment”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
This document is an amendment to EN 12899-4:2007.
The main reason for this amendment is to incorporate in the series of existing standards
EN 12899:2007 (Parts 1 to 5), a new standard EN 12899-6, which deals with the visual performance of
retroreflective sign face materials.
3

---------------------- Page: 5 ----------------------

SIST EN 12899-4:2008/kFp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.