EN ISO 17677-1:2009
(Main)Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2009)
Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2009)
ISO 17677-1:2009 establishes a vocabulary of terms and definitions for resistance spot welding, projection welding and seam welding.
Widerstandsschweißen - Begriffe - Teil 1: Punkt-, Buckel- und Rollennahtschweißen (ISO 17677-1:2009)
Diese Internationale Norm definiert Begriffe für das Widerstandspunk-, Buckel- und Rollennahtschweißen.
Alle Zeiten, die mit einem Steuerungsgerät eingestellt werden, werden entsprechend behandelt.
Soudage par résistance - Vocabulaire - Partie 1: Soudage par points, par bossages et à la molette (ISO 17677-1:2009)
L'ISO 17677-1:2009 établit un vocabulaire de termes et définitions relatifs au soudage par résistance par points, par bossages et à la molette.
Uporovno varjenje - Slovar - 1. del: Točkovno, bradavično in kolutno varjenje (ISO 17677-1:2009)
Ta del ISO 17677 vzpostavlja besednjak izrazov in definicij za uporovno točkovno, bradavično in kolutno varjenje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17677-1:2010
01-april-2010
8SRURYQRYDUMHQMH6ORYDUGHO 7RþNRYQREUDGDYLþQRLQNROXWQRYDUMHQMH ,62
Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677
-1:2009)
Widerstandsschweißen - Begriffe - Teil 1: Punkt-, Buckel- und Rollennahtschweißen
(ISO 17677-1:2009)
Soudage par résistance - Vocabulaire - Partie 1: Soudage par points, par bossages et a
la molette (ISO 17677-1:2009)
Ta slovenski standard je istoveten z: EN ISO 17677-1:2009
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 17677-1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17677-1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 17677-1:2010
EUROPEAN STANDARD
EN ISO 17677-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 01.040.25; 25.160.10
English Version
Resistance welding - Vocabulary - Part 1: Spot, projection and
seam welding (ISO 17677-1:2009)
Soudage par résistance - Vocabulaire - Partie 1: Soudage Widerstandsschweißen - Begriffe - Teil 1: Punkt-, Buckel-
par points, par bossages et à la molette (ISO 17677- und Rollennahtschweißen (ISO 17677-1:2009)
1:2009)
This European Standard was approved by CEN on 14 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17677-1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17677-1:2010
EN ISO 17677-1:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17677-1:2010
EN ISO 17677-1:2009 (E)
Foreword
This document (EN ISO 17677-1:2009) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17677-1:2009 has been approved by CEN as a EN ISO 17677-1:2009 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17677-1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 17677-1:2010
INTERNATIONAL ISO
STANDARD 17677-1
NORME
First edition
Première édition
INTERNATIONALE
2009-07-01
Resistance welding — Vocabulary —
Part 1:
Spot, projection and seam welding
Soudage par résistance — Vocabulaire —
Partie 1:
Soudage par points, par bossages et à la
molette
Widerstandsschweißen — Begriffe —
Teil 1:
Punkt-, Buckel- und Ro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.