iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13141-4:2011

(Main)

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems

This European Standard specifies aerodynamic, acoustic and electrical power performance test methods for fans used in residential ventilation. These methods primarily concern:
- ventilation fans installed on a wall or in a window without any duct;
- ventilation fans installed in the downstream of a duct;
- ventilation fans installed in the upstream of a duct;
- ventilation fans installed in a duct;
- encased ventilation fans having several inlets.
For acoustic performance testing one of the following methods is used:
- in-duct method;
- reverberant room method;
- enveloping surface method.

Lüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 4: Ventilatoren in Lüftungsanlagen für Wohnungen

Diese Europäische Norm legt Verfahren zur Leistungsprüfung von für die Lüftung von Wohnungen ein¬ge¬setz-ten Ventilatoren im Hinblick auf Aerodynamik, Akustik und elektrische Leistung fest. Diese Verfahren be¬ziehen sich vorwiegend auf:
-   Lüftungsventilatoren, die ohne Luftleitung an einer Wand oder in einem Fenster eingebaut sind;
-   Lüftungsventilatoren, die hinter einer Luftleitung eingebaut sind;
-   Lüftungsventilatoren, die vor einer Luftleitung eingebaut sind;
-   Lüftungsventilatoren, die in einer Luftleitung eingebaut sind;
-   Lüftungsventilatoren in Gehäusen mit mehreren Einströmöffnungen.
Für die Prüfung der akustischen Leistung ist eines der folgenden Verfahren anzuwenden:
-   Verfahren in der Luftleitung;
-   Verfahren im Hallfeld;
-   Hüllflächenverfahren.

Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 4: Ventilateurs utilisés dans les systèmes de ventilation des logements

La présente Norme européenne spécifie les méthodes d’essai de performance aérodynamiques, acoustiques et énergétiques pour les ventilateurs utilisés pour la ventilation des logements. Ces méthodes concernent principalement :
-   les ventilateurs de ventilation installés sur un mur ou une fenêtre sans aucun conduit ;
-   les ventilateurs de ventilation installés en aval d’un conduit ;
-   les ventilateurs de ventilation installés en amont d’un conduit ;
-   les ventilateurs de ventilation installés dans un conduit ;
-   les ventilateurs de ventilation enfermés dans une enveloppe ayant plusieurs aspirations.
Pour définir les performances acoustiques, l’une des méthodes suivantes est utilisée :
-   méthode en conduit ;
-   méthode en champ réverbérant ;
-   méthode de la surface enveloppante.

Prezračevanje stavb - Preskušanje lastnosti stanovanjskih prezračevalnih komponent/izdelkov - 4. del: Uporaba ventilatorjev za prezračevanje stanovanj

Ta evropski standard določa aerodinamične, akustične in električne preskusne metode delovanja za ventilatorje, ki se uporabljajo pri stanovanjskem prezračevanju. Te metode obravnavajo predvsem: - prezračevalne ventilatorje, nameščene na zid ali okno, brez kakršnega koli jaška; - prezračevalne ventilatorje, vgrajene za jaškom; - prezračevalne ventilatorje, vgrajene pred jaškom; - prezračevalne ventilatorje, vgrajene v jašek; - prezračevalne ventilatorje v ohišju, ki imajo več dotokov. Za akustično preskušanje delovanja je uporabljena ena izmed naslednjih metod: - metoda v jašku; - metoda z odmevno sobo; - metoda z obdajanjem površine.

General Information

Status
Withdrawn
Publication Date
05-Jul-2011
Withdrawal Date
13-Apr-2021
ICS
23.120 - Ventilators. Fans. Air-conditioners
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
CEN/TC 156 - Ventilation for buildings
Drafting Committee
CEN/TC 156/WG 2 - Natural and mechanical powered residential ventilation
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Apr-2021
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 13141-4:2012 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems

Relations

Replaces
EN 13141-4:2004 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems
Effective Date
23-Mar-2009
Replaced By
EN 13141-4:2021 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Aerodynamic, electrical power and acoustic performance of unidirectional ventilation units
Effective Date
18-Apr-2018

Buy Standard

EN 13141-4:2012EN 13141-4:2012
PreviousNext
Standard
EN 13141-4:2012
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDOQLKLüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 4: Ventilatoren in Lüftungsanlagen für WohnungenVentilation des bâtiments - Essais des performances des composants/produits pour la ventilation des logements - Partie 4: Ventilateurs utilisés dans les systèmes de ventilation des logementsVentilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems91.140.30VLVWHPLVentilation and air-conditioningICS:Ta slovenski standard je istoveten z:EN 13141-4:2011SIST EN 13141-4:2012en,fr,de01-januar-2012SIST EN 13141-4:2012SLOVENSKI
STANDARDSIST EN 13141-4:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13141-4
July 2011 ICS 91.140.30 Supersedes EN 13141-4:2004English Version
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems
Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 4: Ventilateurs utilisés dans les systèmes de ventilation des logements
Lüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 4: Ventilatoren in Lüftungsanlagen für Wohnungen This European Standard was approved by CEN on 4 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13141-4:2011: ESIST EN 13141-4:2012

Mechanical Building Services
Control systems
Ventilation and air conditioning systems
Heating systems
Ductwork
Air terminal devices
Air handling units
Mechanical and natural residential ventilation Design criteria for the indoor environment System performance
Installation
Components/products for residential ventilation Required and optional performance characteristics
Performance testing of components/products for residential ventilation
Simplified calculation methods for residential ventilation systems Design and dimensioning for residential ventilation systems
Performance testing and installation checks for residential ventilation systems
Part 1: Externally and internally mounted air transfer devices
Part 2: Exhaust and supply air terminal devices
Part 3: Range hoods for residential use
Part 4: Fans used in residential ventilation systems
Part 5: Cowls and roof outlet terminal devices
Part 6: Exhaust ventilation system packages used in a single dwelling
Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
Partie 9: Externally mounted humidity controlled air transfer device
Partie 10: Humidity controlled extract air terminal device
Figure 1 — Position of EN 13141-4 in the field of mechanical building services SIST EN 13141-4:2012

Safety
Part 2-80: Particular requirements for fans (IEC 60335-2-80:2002) EN ISO 5136 Acoustics
Determination of sound power radiated into a duct by fans and other air-moving devices
In-duct method (ISO 5136:2003) EN ISO 5801:2008, Industrial fans
Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) ISO 13347-2, Industrial fans
Determination of fan sound power levels under standardized laboratory conditions
Part 2: Reverberant room method ISO 13347-3, Industrial fans
Determination of fan sound power levels under standardized laboratory conditions
Part 3: Enveloping surface methods 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN ISO 5801:2008 and the following apply. 3.1 fan pressure pF pressure increase (in Pa) induced by the fan given as the difference of outlet and inlet total pressure NOTE
Pressure is expressed in Pascals. SIST EN 13141-4:2012

Test voltage is expressed in Volts. 3.4 declared maximum air volume flow qvmax,d maximum air volume flow corresponding to the operating range declared by the manufacturer, given for standard air conditions (20 °C, 101 325 Pa) (in m3/s) NOTE 1 The declared maximum air volume flow is expressed in m3/s. NOTE 2 qvmax,d is not the end point of the curve but a point declared by the manufacturer and ideally chosen for a pressure taken in the list of pref. 3.5 reference total pressure pref pressure set in the table of reference (see Table 1), equal or just below the pressure obtained for declared maximal air volume flow, given in total pressure (in Pa) Table 1 — Set of reference fan total pressure pref Total reference pressurepref Pa 10 20 50 100 150 200 250
NOTE If the measured pressure is lower than 10 Pa, use 10 Pa. 3.6 reference air volume flow qvref air volume flow measured during the aerodynamic test of the envelope curve (maximum setting) and corresponding to the total pressure, given for standard air conditions (20 °C, 101 325 Pa) (in m3/s) NOTE The reference air volume flow is expressed in m3/s. 3.7 Demand Controlled Ventilation DCV method providing automatic regulation to the ventilation system dependant upon the needs of air c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12309-2:2015(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety
SIST EN 12309-2:2015

1.1   Scope of EN 12309 series
Appliances covered by this European Standard include one or a combination of the following:
―   gas fired sorption chiller;
―   gas fired sorption chiller/heater;
―   gas fired sorption heat pump.
This European Standard applies to appliances only when used for space heating and cooling with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
―   integral burners under the control of fully automatic burner control systems;
―   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated;
―   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012). In the case of packaged units (consisting of several parts), the standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by this European Standard.
Installations used for heating and/or cooling of industrial processes are not within the scope of these standards.
NOTE   All the symbols given in this text are used regardless of the language used.
1.2   Scope of this Part 2 to EN 12309
This part of EN 12309 deals with the safety of gas-driven sorption heat pumps as defined in prEN 12309 1. Only types B12 for outdoor installations, B13 for outdoor installations, B22 for outdoor installations, B23 for outdoor installations, C12 and C13, C32 and C33 are covered in this European Standard.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12309-7:2014(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances
SIST EN 12309-7:2015

1.1   Scope of EN 12309
Appliances covered by this European Standard include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump.
This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems,
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in prEN 12309 1:2012).
In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this text should be used regardless of the language used.
1.2   Scope of this Part 7 of EN 12309
This part of EN 12309 deals particularly with the specific provisions of hybrid heating appliances based on gas-driven sorption heat pumps as defined in Part 1.
The heating appliances covered by this European Standard are of a hybrid type, an encased assembly or assemblies combining a direct or indirect-fired sorption heat pump for base load and a peak load condensing boiler with only one flue system, electrical supply cable and human machine interface to the end user. The direct- or indirect-fired sorption heat pump integrated in the hybrid appliances in this European Standard could be intermittent or continuously operating ab or adsorption heat pump.
The control system of hybrid heating appliances decides on the transition between the heat pump operation mode to/from the mixed operation mode (heating by both sorption heat pump as well as the peak boiler) and the direct heating mode (only peak boiler) depending on the heating fluid inlet or return temperature, temperature of brine entering the indoor heat exchanger (evaporator) of the heat pump, the required outlet or supply temperature dependent on the outdoor temperature as well as the target value of the indoor or room temperature. Upon transition from the heat pump operation mode to the mixed operation mode, the control system decides also on the degree of mixing based on the above mentioned parameters.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12309-6:2014(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 6: Calculation of seasonal performances
SIST EN 12309-6:2015

1.1   Scope of EN 12309
Appliances covered by this standard include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump.
This European Standard applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems,
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309 1:2014).
In the case of packaged units (consisting of several parts), this European Standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this text should be used regardless of the language used.
1.2   Scope of this Part 6 to EN 12309
This part of EN 12309 specifies the calculation methods of seasonal performances for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. It deals in particular with the calculation methods of reference seasonal performances in cooling and heating mode for monovalent and bivalent appliances.
NOTE   This European Standard serves as an input for the calculation of the system energy efficiency in heating mode of specific heat pump systems in buildings, as stipulated in EN 15316-4-2.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3379:2024(Main)
Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)
SIST EN ISO 3379:2025

This document specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12007-5:2024(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
SIST EN 12007-5:2025

This document describes the specific functional requirements for the transportation of gases (gaseous energy carriers) through service lines in addition to the general functional requirements of EN 12007 1 for:
a)   a maximum operating pressure (MOP) up to and including 16 bar;
b)   an operating temperature between −20 °C and +40 °C;
c)   gases and blends of gases which are in the gaseous state when conveyed in the gas pipeline infrastructure such as hydrogen, hydrogen rich, and methane rich gases, dimethyl ether (DME) and propane and butanes used for combustion and/or as feedstock, excluding steam and compressed air, where technical evaluation has ensured that operating conditions, constituents and properties of the gas do not affect the safe operation and maintenance of the service line.
It applies to their design, construction, commissioning, decommissioning, operation, maintenance, extension and other associated works including safety and environmental aspects. The service line is the physical asset comprising of pipework from the gas main branch saddle or top tee to the outlet of the distribution system operator’s nominated point(s) of delivery (for example: isolation valve, regulator, meter connection or combination of regulator and isolation valve).
This document does not apply retrospectively to installations before the publication date unless specifically stated.
Specific functional requirements for:
—   polyethylene pipelines are given in EN 12007 2;
—   steel pipelines are given in EN 12007 3;
—   polyamide (PA-U) pipelines are given in CEN/TS 12007 6;
—   pipework for buildings are given in EN 1775;
—   pressure regulating installations are given in EN 12279 or EN 12186;
—   pressure testing, commissioning and decommissioning are given in EN 12327;
—   safety management system (SMS) and pipeline integrity management system (PIMS) are given in EN 17649.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that there can exist more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 gives:
—   description of legislations/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
SIST EN 18003:2025

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17972:2024(Main)
Food authenticity - Food authenticity and fraud - Concepts, terms and definitions
SIST EN 17972:2025

This document provides technical definitions of terms relating to authenticity and fraud when referring to food products. All terms and definitions are in the context of food supply chains, but most of them can also be applied when referring to feed products and the feed supply chain.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-3:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects
kSIST FprEN 16214-3:2023

This document specifies procedures, criteria and indicators meeting the sustainability criteria of European Commission Directive 2018/EU/2001 (RED II), the recast of the Renewable Energy Directive, for agricultural biomass and forest biomass for energy applications, i.e. biofuels, bioliquids and biomass fuels. This document is applicable to production, cultivation and harvesting of biomass from agricultural land and forest land for biofuels, bioliquids and biomass fuel production.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
SIST EN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17992:2024(Main)
Food authenticity - Determination of the sum of 16-O-Methylcafestol, 16-O-Methylkahweol and their derivatives in roasted coffee by ¹H-qNMR
SIST EN 17992:2025

This document specifies a method for the determination of soluble 16-O-Methylcafestol and 16-O-Methylkahweol content (the sum of free forms and derivatives, e.g. fatty acid esters, henceforth abbreviated as 16-OMD = “diterpenes”) in roasted coffee (beans or ground), using quantitative proton nuclear magnetic resonance spectroscopy (1H-qNMR).
If complying with the experimental parameters described below, this test procedure has been proven for the following mass fraction range:
w16-OMD:    20 mg/kg to 2 000 mg/kg.
The mass fraction range can be expanded by suitable changes of the experimental parameters, e.g. a different weighed portion of ground coffee or the accumulation of more NMR-transients.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day