EN ISO 3449:2008

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

ISO 3449:2004 specifies laboratory tests for measuring the structural characteristics of, and gives performance requirements in a representative test for, falling-object protective structures (FOPS) intended for use on ride-on earth-moving machines as defined in ISO 6165. It is applicable to both FOPS supplied as an integral part of the machine and those supplied separately for attachment to the machine. It is not applicable to FOPS intended for use on landfill compactors, excavators, rollers, trenchers, pipelayers, for the additional seat for operation of an attachment (e.g. attachment backhoe), or on machines with a power rating of less than 15 kW.

Erdbaumaschinen - Schutzaufbauten gegen herabfallende Gegenstände - Prüfungen und Anforderungen (ISO 3449:2005)

Diese Internationale Norm beschreibt die Prüfverfahren zur Bestimmung der baulichen Eigenschaften und
Anforderungen bei einer repräsentativen Prüfung eines Schutzaufbaus gegen herabfallende Gegenstände
(FOPS) für Erdbaumaschinen mit aufsitzendem Maschinenführer, wie in ISO 6165 definiert. Sie gilt sowohl für
FOPS, die ein integraler Bestandteil der Maschine sind, als auch für solche, die separat an die Maschine
angebaut sind. Sie gilt nicht für FOPS für Müllverdichter, Bagger, Walzen, Grabenfräsen, Rohrleger,
Maschinen, die in Verbindung mit einer Arbeitsausrüstung einen zusätzlichen Sitz aufweisen (z. B. Anbau-
Heckbagger) oder Maschinen mit einer Leistung < 15 kW.
ANMERKUNG Diese Internationale Norm kann dazu benutzt werden, eine Anleitung für den Hersteller von Schutzaufbauten
gegen herabfallende Gegenstände zu geben, falls solche Schutzaufbauten für in dieser Norm behandelte und
andere Maschinen mit bestimmter Anwendung bereit gestellt werden sollen.

Engins de terrassement - Structures de protection contre les chutes d'objets - Essais de laboratoire et critères de performance (ISO 3449:2005)

L'ISO 3449:2005 spécifie des essais de laboratoire destinés à établir les caractéristiques structurelles, et fournit des exigences de performance lors d'un essai représentatif des structures de protection contre les chutes d'objets (FOPS) destinées à être utilisées dans des engins de terrassement à conducteur porté, tels que définis dans l'ISO 6165. Elle est applicable aussi bien aux FOPS faisant partie intégrante de l'engin qu'à celles qui sont fournies séparément pour être fixées à un engin. Elle n'est pas destinée à s'appliquer aux FOPS pour compacteurs de remblais, pelles, compacteurs, trancheuses, poseurs de canalisations, pour le siège supplémentaire nécessité par le fonctionnement d'un accessoire (par exemple chargeuse-pelleteuse), ou pour les engins de moins de 15 kW de puissance nominale.

Stroji za zemeljska dela - Zaščita pred padajočimi predmeti - Laboratorijski preskusi in zahteve (ISO 3449:2005)

General Information

• Status: Published
• Publication Date: 16-Sep-2008
• Withdrawal Date: 27-Dec-2009
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-Sep-2008
• Completion Date: 17-Sep-2008
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 3449:2008 - Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

Relations

• Replaces: EN ISO 3449:2005 - Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3449:2008
01-november-2008
1DGRPHãþD
SIST EN ISO 3449:2005
6WURML]D]HPHOMVNDGHOD=DãþLWDSUHGSDGDMRþLPLSUHGPHWL/DERUDWRULMVNL
SUHVNXVLLQ]DKWHYH,62
Earth-moving machinery - Falling-object protective structures - Laboratory tests and
performance requirements (ISO 3449:2005)
Erdbaumaschinen - Schutzaufbauten gegen herabfallende Gegenstände - Prüfungen
und Anforderungen (ISO 3449:2005)
Engins de terrassement - Structures de protection contre les chutes d'objets - Essais de
laboratoire et critères de performance (ISO 3449:2005)
Ta slovenski standard je istoveten z: EN ISO 3449:2008
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3449:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3449:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 3449:2008
EUROPEAN STANDARD
EN ISO 3449
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 53.100 Supersedes EN ISO 3449:2005
English Version
Earth-moving machinery - Falling-object protective structures -
Laboratory tests and performance requirements (ISO
3449:2005)
Engins de terrassement - Structures de protection contre Erdbaumaschinen - Schutzaufbauten gegen herabfallende
les chutes d'objets - Essais de laboratoire et critères de Gegenstände - Prüfungen und Anforderungen (ISO
performance (ISO 3449:2005) 3449:2005)
This European Standard was approved by CEN on 25 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3449:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3449:2008
EN ISO 3449:2008 (E)
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3449:2008
EN ISO 3449:2008 (E)
Foreword
The text of ISO 3449:2005 has been prepared by Technical Committee ISO/TC 127 “Earth-moving machinery”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO 3449:2008 by
Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3449:2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fol
...