CEN/TS 17201:2018

Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests

This Technical Specification specifies analytical methods for the determination of major, minor and trace elements in aqua regia digests of construction products. It refers to the following 67 elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rubidium (Rb), rhenium (Re), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulphur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr.
The methods in this Technical Specification are applicable to construction products.
NOTE   Construction products include e.g. mineral-based products (S); bituminous products (B); metals (M); wood-based products (W); plastics and rubbers (P); sealants and adhesives (A); paints and coatings (C), see also CEN/TR 16045 [1].
The selection of analytical methods to be applied is based on the required sensitivity of the method, which is provided for all combinations of substance and analytical procedure.

Bauprodukte: Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an anorganischen Stoffen - Verfahren zur Analyse von Königswasseraufschlusslösungen

Produits de construction: Evaluation de l'émission de substances dangereuses - Contenu des substances inorganiques - Méthodes d’analyse des digestats d’eau régale

Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Vsebnost anorganskih snovi - Metode za analizo po razklopu z zlatotopko

Ta evropski standard določa metode za določanje glavnih in stranskih elementov ter elementov v sledovih (Ag, Al, As, Ba, Be, Bi, B, Cd, Ca, Cr, Co, Cu, Fe, Hg, K, La, Li, Mg, Mo, Mn, Na, Nd, Ni, P, Pb, Pr, skupnega S, Sb, Sc, Se, Sm, Sr, Te, Tl, Th, Ti, U, V, W, Zn in Zr) v gradbenih proizvodih. <>
Podane so meje zaznavanja pri tej metodi, ki omogočajo izbiro analize metode za uporabo. Za živo srebro je podana tudi metoda hladnih par.

General Information

• Status: Withdrawn
• Publication Date: 17-Jul-2018
• Withdrawal Date: 18-Dec-2018
• ICS: 91.100.01 - Construction materials in general
• Technical Committee: CEN/TC 351 - Construction Products - Assessment of release of dangerous substances
• Drafting Committee: CEN/TC 351/WG 5 - Content and eluate analysis in construction products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Dec-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/366 - Concerning the execution of standardisation work for the development of horizontal standardised assessment methods for harmonized approcaches relating to dangerous substances under the construction products directive (CPD)
• Ref Project: SIST-TS CEN/TS 17201:2019 - Construction products - Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests

Relations

• Merged Into: CEN/TS 17201:2018+AC:2018 - Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
• Effective Date: 31-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 17201:2019
01-januar-2019
*UDGEHQLSURL]YRGL2FHQMHYDQMHVSURãþDQMDQHYDUQLKVQRYL9VHEQRVW
DQRUJDQVNLKVQRYL0HWRGH]DDQDOL]RSRUD]NORSX]]ODWRWRSNR
Construction products - Assessment of release of dangerous substances - Content of
inorganic substances - Methods for analysis of aqua regia digests
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an
anorganischen Stoffen - Verfahren zur Analyse von Königswasseraufschlusslösungen
Produits de construction - Evaluation de l'émission de substances dangereuses -
Contenu des substances inorganiques - Méthodes d’analyse des digestats d’eau régale
Ta slovenski standard je istoveten z: CEN/TS 17201:2018
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST-TS CEN/TS 17201:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 17201:2019

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 17201:2019


CEN/TS 17201
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

July 2018
TECHNISCHE SPEZIFIKATION
ICS 91.100.01
English Version

Construction products: Assessment of release of
dangerous substances - Content of inorganic substances -
Methods for analysis of aqua regia digests
Produits de construction: Evaluation de l'émission de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Contenu des substances gefährlichen Stoffen - Gehalt an anorganischen Stoffen
inorganiques - Méthodes d'analyse des digestats d'eau - Verfahren zur Analyse von
régale Königswasseraufschlusslösungen
This Technical Specification (CEN/TS) was approved by CEN on 23 March 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17201:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 17201:2019
CEN/TS 17201:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 8
5 Sample pre-treatment . 8
6 Selection of suitable analytical test method . 8
6.1 Table of test methods . 8
6.2 General validation information .
...