prEN ISO 10882-2
(Main)Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023)
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023)
This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in
welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove
metals:
(111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/
(114) Self-shielded tubular-cored arc welding
(131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/
(135) Metal active gas welding; MAG welding; gas metal arc welding /USA/
(136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/
(137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/
(141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/
(15) Plasma arc welding;
(31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/
(52) Laser beam welding;
(912) Flame brazing; torch brazing /USA/
(97) Braze welding;
_ arc and flame gouging;
_ arc and laser cutting processes;
_ flame, plasma and laser and plasma cutting processes;
_ metal-spraying (see EN ISO 4063).
The following gases and vapours which can be produced or be present during welding and allied processes are
covered:
_ ozone (O3);
_ carbon monoxide (CO);
_ carbon dioxide (CO2);
_ nitric oxide (NO) and nitrogen dioxide (NO2);
_ vapours produced in the welding or cutting of metals having paint or other surface coatings.
Fuel, oxidant and shielding gases used in welding and allied processes are not covered.
The general background level of gases and vapours in the workplace atmosphere influences personal exposure,
and therefore the role of fixed point measurements is also considered.
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren - Probenahme von partikelförmigen Stoffen und Gasen im Atembereich des Schweißers - Teil 2: Probenahme von Gasen (ISO/DIS 10882‑2:2023)
Hygiène et sécurité en soudage et techniques connexes - Échantillonnage de particules en suspension et gaz dans la zone respiratoire des opérateurs - Partie 2: Échantillonnage des gaz (ISO/DIS 10882-2:2023)
La présente partie de l'EN ISO 10882 donne des indications pour la détermination de l'exposition individuelle aux
gaz et aux vapeurs organiques en soudage et techniques connexes. Elle s'applique aux procédés thermiques
suivant utilisés pour assembler, couper, plaquer ou éliminer le métal :
(111) Soudage manuel à l'arc avec électrode enrobée ;
(114) Soudage à l'arc avec fil fourré autoprotecteur ;
(131) Soudage MIG (Soudage à l'arc sous protection de gaz inerte avec fil-électrode fusible) ;
(135) Soudage MAG (Soudage à l'arc sous protection de gaz actif avec fil-électrode fusible) ;
(136) Soudage MAG avec fil fourré (Soudage à l'arc sous protection de gaz actif avec fil-électrode fourré) ;
(137) Soudage MIG avec fil fourré (Soudage à l'arc sous protection de gaz inerte avec fil-électrode fourré) ;
(141) Soudage TIG (Soudage à l'arc sous protection de gaz inerte avec électrode de tungstène) ;
(15) Soudage plasma ;
(31) Soudage oxygaz ;
(52) Soudage laser ;
(912) Brasage fort aux gaz ;
(97) Soudobrasage ;
Gougeage à l'arc et à la flamme;
Procédés de coupage à l'arc et au laser ;
Procédés de coupage à la flamme, au laser/plasma et au plasma ;
Métallisation. [EN ISO 4063]
Les gaz et vapeurs organiques suivants, qui peuvent être produits ou être préexistants lors du soudage et des
techniques connexes, sont couverts :
_ l'ozone (O3) ;
_ le monoxyde de carbone (CO) ;
_ le dioxyde de carbone (CO2) ;
_ le monoxyde d'azote (NO) et le peroxyde d'azote (NO2) ;
_ les vapeurs organiques produites en soudage ou coupage de métaux peints ou ayant un autre type de
revêtement.
Les gaz combustibles, les gaz oxydants et les gaz de protection utilisés en soudage et techniques connexes ne
sont pas couverts.
Les concentrations ambiantes générales de gaz et de vapeurs organiques dans l'atmosphère du poste de travail
influent sur l'exposition individuelle, et, par conséquent, le rôle des mesurages à point fixe est également pris en
compte.
Varnost in zdravje pri varjenju in sorodnih postopkih - Vzorčenje prašnih delcev in plinov iz dihalnega območja varilca - 2. del: Vzorčenje plinov (ISO/DIS 10882-2:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10882-2:2023
01-julij-2023
Varnost in zdravje pri varjenju in sorodnih postopkih - Vzorčenje prahu in plinov iz
dihalnega območja varilca - 2. del: Vzorčenje plinov (ISO/DIS 10882-2:2023)
Health and safety in welding and allied processes - Sampling of airborne particles and
gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-
2:2023)
Arbeits- und Gesundheitsschutz beim Schweißen und bei verwandten Verfahren -
Probenahme von partikelförmigen Stoffen und Gasen im Atembereich des Schweißers -
Teil 2: Probenahme von Gasen (ISO/DIS 10882-2:2023)
Hygiène et sécurité en soudage et techniques connexes - Échantillonnage de particules
en suspension et gaz dans la zone respiratoire des opérateurs - Partie 2:
Échantillonnage des gaz (ISO/DIS 10882-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 10882-2
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
oSIST prEN ISO 10882-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10882-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10882-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10882-2
ISO/TC 44/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-05-09 2023-08-01
Health and safety in welding and allied processes —
Sampling of airborne particles and gases in the operator's
breathing zone —
Part 2:
Sampling of gases
Hygiène et sécurité en soudage et techniques connexes — Échantillonnage de particules en suspension et
gaz dans la zone respiratoire des opérateurs —
Partie 2: Échantillonnage des gaz
ICS: 13.100; 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10882-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10882-2:2023
ISO/DIS 10882-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10882-2
ISO/TC 44/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Health and safety in welding and allied processes —
Sampling of airborne particles and gases in the operator's
breathing zone —
Part 2:
Sampling of gases
Hygiène et sécurité en soudage et techniques connexes — Échantillonnage de particules en suspension et
gaz dans la zone respiratoire des opérateurs —
Partie 2: Échantillonnage des gaz
ICS: 13.100; 25.160.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 10882-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10882-2:2023
ISO/DIS 10882-2:2023(E)
Contents Page
Fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.