EN 1176-6:2017+AC:2019
(Main)Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
This document is applicable to rocking equipment which is used as playground equipment for children, as defined in 3.1. Where the main play function is not rocking, the relevant requirements in this document may be used, as appropriate.
This document specifies additional safety requirements and test methods for seesaws and rocking equipment intended for permanent installation for use by children.
It is intended to provide protection to the user against possible hazards during use.
NOTE Guidance for assessing the safety of other forms of seesaw/rocking equipment is given in informative Annex A.
Spielplatzgeräte und Spielplatzböden - Teil 6: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Wippgeräte
Dieses Dokument gilt für Wippgeräte, die nach der Definition in 3.1 als Spielplatzgeräte für Kinder be¬nutzt werden. Sofern die Hauptspielfunktion nicht Wippen ist, dürfen die entsprechenden An¬for¬de¬run¬gen dieses Dokumentes, falls zutreffend, verwendet werden.
Dieses Dokument legt zusätzliche sicherheitstechnische Anforderungen an und Prüfverfahren für Wippen und Wippgeräte fest, die dauerhaft installiert und für die Benutzung durch Kinder vorgesehen sind.
Das Ziel besteht darin, den Nutzer gegen mögliche Gefahren während der Nutzung zu schützen.
ANMERKUNG Eine Anleitung zur Bewertung der Sicherheit anderer Formen von Wippen/Wippgeräten ist im infor¬-ma¬tiven Anhang A enthalten.
Équipements et sols d'aires de jeux - Partie 6 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux équipements oscillants
Le présent document est applicable aux équipements oscillants, comme définis en 3.1, qui sont utilisés comme équipements d’aires de jeux pour enfants. Lorsque la principale fonction de jeu n’est pas l’oscillation, les exigences appropriées définies dans le présent document peuvent être utilisées, selon le cas.
Le présent document spécifie les exigences de sécurité et méthodes d’essai complémentaires relatives aux équipements à bascule et aux équipements oscillants destinés à être installés de façon permanente et utilisés par des enfants.
Elles sont destinées à fournir à l’utilisateur une protection contre les éventuels dangers pendant l’utilisation.
NOTE L’Annexe A, informative, comporte des préconisations concernant l'évaluation de la sécurité d’autres formes d’équipements à bascule ou oscillants.
Oprema in podloge otroških igrišč - 6. del: Dodatne posebne varnostne zahteve in preskusne metode za oporne gugalnice
Ta dokument se uporablja za oporne gugalnice, ki se uporabljajo kot oprema za otroška igrišča, kot je določeno v točki 3.1. Kadar glavna funkcija igranja ni zibanje, se lahko ustrezne zahteve tega dokumenta uporabljajo, kot je ustrezno.
Ta dokument določa dodatne varnostne zahteve za opremo za nihanje in guganje, namenjeno za trajno namestitev za otroke.
Namenjen je zaščiti uporabnika pred morebitnimi nevarnostmi med uporabo.
OPOMBA: Smernice za ocenjevanje varnosti drugih oblik opreme za nihanje/guganje so na voljo v informativnem dodatku A.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spielplatzgeräte und Spielplatzböden - Teil 6: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für WippgeräteÉquipements et sols d'aires de jeux - Partie 6 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux équipements oscillantsPlayground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment97.200.40,JULãþDPlaygroundsICS:Ta slovenski standard je istoveten z:EN 1176-6:2017+AC:2019SIST EN 1176-6:2018+AC:2019en,fr,de01-april-2019SIST EN 1176-6:2018+AC:2019SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1176-6:2017+AC
January 2019 ICS 97.200.40 Supersedes EN 1176-6:2017
English Version
Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
Équipements et sols d'aires de jeux - Partie 6: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux équipements oscillants
Spielplatzgeräte und Spielplatzböden - Teil 6: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Wippgeräte This European Standard was approved by CEN on 15 April 2016 and includes the Corrigendum issued by CEN on 9 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels © 2019 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1176-6:2017+AC:2019 E SIST EN 1176-6:2018+AC:2019
a) Rocking equipment
b) Seesaw Key 1 hand support 4 seat/stand 2 body 5 supporting component 3 foot rest 6 anchorage Figure 1 — Principal components for rocking equipment/seesaw SIST EN 1176-6:2018+AC:2019
Figure 2 — Example of an axial seesaw (Type 1) 3.3 single point seesaw single point rocking equipment (Type 2A and 2B) equipment with a single point supporting component Note 1 to entry: See Figure 3. Note 2 to entry: Typical single point supporting components include: coils, springs, torsion and compression blocks.
a) Type 2A with predetermined main direction of movement b) Type 2B with multi-directional movement Figure 3 — Examples of single point seesaw/rocking equipment (Types 2A and 2B) SIST EN 1176-6:2018+AC:2019
a) Type 3A with predetermined movement b) Type 3B with multi-directional movement Figure 4 — Examples of multi point seesaw (Types 3A and 3B) 3.5 rocking seesaw (Type 4) equipment that is fixed so that the movement, which is mainly horizontal, is guided by several parallel axes and moves in one (to fro) direction only Note 1 to entry: See Figure 5.
Figure 5 — Example of a rocking seesaw (Type 4) SIST EN 1176-6:2018+AC:2019
™ Key 1 circular movement around central post 2 rocking movement Figure 6 — Example of a sweeping seesaw supported above the users position (Type 5) SIST EN 1176-6:2018+AC:2019
™ Key 1 limited swinging movement 2 rocking movement Figure 7 — Example of overhead single axis seesaw (Type 6) 3.8 equipment body main moving part connected to the equipment supporting component(s) 3.9 supporting component component which connects the equipment body to the anchorage 3.10 Anchorage means by which stability and fixation to the ground/surface is made 3.11 damping combined effect of the supporting component(s) that moderates the speed at which the equipment can move and the reduction of shock effects at the outer positions of the equipment SIST EN 1176-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.