EN ISO 20312:2011
(Main)Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011)
Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011)
ISO 20312:2011 applies to design and operating limits for drill strings containing aluminium alloy pipes manufactured in accordance with ISO 15546.
Erdöl- und Erdgasindustrie - Auslegung und Einsatzgrenzen von Bohrsträngen aus Aluminium-Bohrgestängen (ISO 20312:2011)
Industries du pétrole et du gaz naturel - Conception et limites de fonctionnement des rames à composants en alliage d'aluminium (ISO 20312:2011)
L'ISO 20312:2011 s'applique à la conception et aux limites de fonctionnement des rames contenant des tiges en alliage d'aluminium fabriquées conformément à l'ISO 15546.
Industrija nafte in zemeljskega plina - Načrtovanje in omejitve uporabe vrtalnih nizov s sestavnimi deli iz aluminijevih zlitin (ISO 20312:2011)
Ta mednarodni standard velja za načrtovanje in omejitve uporabe za vrtalne nize, ki vsebujejo cevi iz aluminijevih zlitin, proizvedene v skladu z ISO 15546.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20312:2011
01-december-2011
,QGXVWULMDQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQRPHMLWYHXSRUDEHYUWDOQLK
QL]RYVVHVWDYQLPLGHOLL]DOXPLQLMHYLK]OLWLQ ,62
Petroleum and natural gas industries - Design and operating limits of drill strings with
aluminium alloy components (ISO 20312:2011)
Erdöl- und Erdgasindustrie - Empfohlenes Verfahren für die Auslegung und die
Einsatzgrenzen von Bohrsträngen aus Aluminium-Bohrgestängen (ISO 20312:2011)
Industries du pétrole et du gaz naturel - Conception et limites d'exploitation des trains de
tiges de forage ayant des composants en alliage d'aluminium (ISO 20312:2011)
Ta slovenski standard je istoveten z: EN ISO 20312:2011
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 20312:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20312:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 20312:2011
EUROPEAN STANDARD
EN ISO 20312
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2011
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operating
limits of drill strings with aluminium alloy components (ISO
20312:2011)
Industries du pétrole et du gaz naturel - Conception et Erdöl- und Erdgasindustrie - Auslegung und
limites de fonctionnement des garnitures de forage en Einsatzgrenzen von Bohrsträngen aus Aluminium-
alliage d'aluminium (ISO 20312:2011) Bohrgestängen (ISO 20312:2011)
This European Standard was approved by CEN on 14 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20312:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20312:2011
EN ISO 20312:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20312:2011
EN ISO 20312:2011 (E)
Foreword
This document (EN ISO 20312:2011) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the
latest by April 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 20312:2011 has been approved by CEN as a EN ISO 20312:2011 without any modification.
3
----------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.