EN 13114:2002

Tannery machines - Rotating process vessels - Safety requirements

1.1    This European standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine.
1.2    This standard covers the following machines (see annex C and figures 1 and 2 for typical configurations):
a) horizontal rotating vessels ;
b) inclined rotating vessels.
1.3    This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere
1.4    This standard takes account of intended use, foreseeable misuse, component and systems failure.
The machines are for fixed installation.
1.5    This European standard applies to the machines manufactured after its date of issue.
1.6    This standard does not establish any requirements for electromagnetic disturbances.
NOTE    Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard may be necessary to satisfy Directive 94/9/EC.

Gerberei-Maschinen - Rotierende Bearbeitungsgefäße - Sicherheitsanforderungen

1.1   Diese Europäische Norm spezifiziert Sicherheitsanforderungen bezüglich Konstruktion, Bau, Betrieb, Regelung, Einrichten, Reinigung und Wartung von Maschinen.
1.2   Diese Norm umfasst die folgenden Maschinen (typische Ausführungen siehe Anhang C und Bilder 1 und 2):
a)   Horizontal rotierende Gefäße;
b)   Schräg gelagerte rotierende Gefäße.
1.3   Die Norm gilt nicht für Maschinen, bei denen lösemittelhaltige Substanzen eingesetzt werden, die gesundheitsschädliche Rauchgase bzw. Dampf erzeugen oder zu einer feuergefährlichen oder explosionsfähigen Atmosphäre führen können.
1.4   Diese Norm befasst sich mit der bestimmungsgemäßen Verwendung, vorhersehbarem Missbrauch und möglichem Versagen der Bauteile und des Systems.
Diese Maschinen sind Festinstallationen.
1.5   Diese Europäische Norm gilt für Maschinen, die nach dem Datum ihrer Veröffentlichung gebaut werden.
1.6   Diese Norm legt keine Anforderungen für elektromagnetische Verträglichkeit fest.
ANMERKUNG   Die Richtlinie 94/9/EG zu Ausstattung und Sicherheitssystemen in potentiell explosionsfähiger Atmosphäre kann für die in dieser Europäischen Norm behandelten Arten von Maschinen oder Ausrüstung Anwendung finden. Die derzeitige Norm entspricht jedoch nicht in allem der Richtlinie 94/9/EG. In eine zukünftige Überarbeitung müssen zur Erfüllung der Richtlinie 94/9/EG möglicherweise zusätzliche Sicherheitsanforderungen aufgenommen werden.

Machines de tannerie - Tonneaux tournants - Prescriptions de sécurité

1.1 La présente norme européenne spécifie les prescriptions de sécurité concernant toutes les phases de la vie d'une machine énumérées en 3.11 a) de l'EN 292-1:1991. 1.2 La présente norme européenne s'applique aux machines suivantes (voir figures 1 et 2 pour les configurations types): a) tonneaux tournants horizontaux; b) tonneaux tournants inclinés. 1.3 La présente norme européenne ne s'applique pas aux machines qui utilisent des substances contenant des solvants susceptibles de générer de la fumée et/ou de la vapeur nuisibles pour la santé, ou de provoquer un incendie ou de créer une atmosphère explosible.

Strojarski stroji – Vrteče se procesne posode – Varnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 16-Apr-2002
• Withdrawal Date: 17-Nov-2009
• ICS: 59.140.40 - Machines and equipment for leather and fur production
• Technical Committee: CEN/TC 200 - Tannery machinery - Safety
• Drafting Committee: CEN/TC 200/WG 6 - Rotor and rotating vessel machines (Provisional title)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Nov-2009
• Completion Date: 18-Nov-2009
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN 13114:2003 - Tannery machines - Rotating process vessels - Safety requirements

Relations

• Merged Into: EN 13114:2002+A1:2009 - Tannery machines - Rotating process vessels - Safety requirements
• Effective Date: 18-Jan-2023
• Amended By: EN 13114:2002/FprA1 - Tannery machines - Rotating process vessels - Safety requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13114:2003
01-oktober-2003
6WURMDUVNLVWURML±9UWHþHVHSURFHVQHSRVRGH±9DUQRVWQH]DKWHYH
Tannery machines - Rotating process vessels - Safety requirements
Gerberei-Maschinen - Rotierende Bearbeitungsgefäße - Sicherheitsanforderungen
Machines de tannerie - Tonneaux tournants - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 13114:2002
ICS:
59.140.40 Stroji in oprema za Machines and equipment for
proizvodnjo usnja in krzna leather and fur production
SIST EN 13114:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13114
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2002
ICS 59.140.40
English version
Tannery machines - Rotating process vessels - Safety
requirements
Machines de tannerie - Tonneaux tournants - Prescriptions Gerberei-Maschinen - Rotierende Bearbeitungsgefäße -
de sécurité Sicherheitsanforderungen
This European Standard was approved by CEN on 27 December 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13114:2002 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13114:2002 (E)
Contents
page
Foreword.4
Introduction .5
1 Scope .5
2 Normative references .5
3 Terms and definitions.7
4 List of hazards.8
4.1 Mechanical hazards .9
4.1.1 General.9
4.1.2 Wet processing vessels .9
4.1.3 Dry milling drums .9
4.2 High pressure fluid ejection.11
4.3 Electrical hazard.11
4.4 Slip trip and fall hazard .11
4.5 Noise .11
4.6 Fume and vapour emission .11
4.7 Fire prevention .12
4.8 Neglecting ergonomics prin
...