iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 972:1998+A1:2010/AC:2011

(Corrigendum)

Tannery machines - Reciprocating roller machines - Safety requirements

Tannery machines - Reciprocating roller machines - Safety requirements

TC - Correction of reference in 5.3.2 a. from EN 1769-2 to EN 1760-2 - Mechanical engineering - Machinery

Gerberei-Maschinen - Walzenmaschinen - Sicherheitsanforderungen

Machines de tannerie - Machines à cylindres alternatifs - Prescriptions de sécurité

Strojarski stroji - Valjčni stroji - Varnostne zahteve

Ta evropski standard določa varnostne zahteve za vse faze življenja stroja, navedenega v točki 5.3 a) standarda EN ISO 12100-1:2003. Valjčni stroji so stroji, ki se uporabljajo za obdelavo živalskih kož. Imajo izmenično odpirajoče in zapirajoče se gibanje dovajalnih valjev ali tekočih trakov, ki lahko po potrebi tudi tečejo v vzvratno smer. Ta standard zajema naslednje valjčne stroje a) brusilni stroji b) stroji za poliranje c) likalni stroji (ovčja koža in krzno) d) stroji za mikanje e) stroji za striženje (ovčja koža in krzno) f) cilindrični univerzalni stroji za zlaganje g) stroji za glajenje usnja h) stroji za odstranjevanje volne i) golilni stroji j) stroji za odstranjevanje dlak k) stroji za izločevanje vode l) valjasti likalni stroji m) valjasti stroji za zlaganje n) mezdrilni stroji o) stroji za odgnojevanje p) stroji za mokro valjanje q) stroji za struženje (odvod) r) stroji za struženje (dovod) Upošteva namen uporabe, predvidljivo napačno uporabo, okvaro sestavnega dela in sistema. Ta evropski standard se ne uporablja za valjčne stroje, ki so bili proizvedeni pred datumom, ko je bil objavljen kot EN. Ta evropski standard zagotavlja določbe za zmanjšanje emisij hrupa v stopnji načrtovanja. Vendar pa ne zagotavlja preskusne kode hrupa za določevanje z merjenjem vrednosti emisij hrupa za stroj, ki ga zajema. Brez take kode proizvajalec ne more izpolniti svoje obveznosti, da bi zagotovil vrednosti emisij hrupa za stroje, ki jih da na tržišče. V tem evropskem standardu so obravnavane vse velike nevarnosti, razen naslednjih: - emisije prahu, dima in hlapov; - ogenj. Za te nevarnosti so splošna navodila predlagana v normativnih dodatkih. Načrtovalci in proizvajalci morajo neposredno preveriti, da so bile metode, uporabljene za zmanjšanje teh nevarnosti, uspešne.

General Information

Status
Published
Publication Date
05-Apr-2011
ICS
59.140.40 - Machines and equipment for leather and fur production
Technical Committee
CEN/TC 200 - Tannery machinery - Safety
Drafting Committee
CEN/TC 200/WG 1 - Preprocessing and preparation machines
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Apr-2011
Completion Date
06-Apr-2011
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 972:2000+A1:2011/AC:2011 - Tannery machines - Reciprocating roller machines - Safety requirements

Relations

Corrects
EN 972:1998+A1:2010 - Tannery machines - Reciprocating roller machines - Safety requirements
Effective Date
05-Mar-2011

Buy Standard

EN 972:2000+A1:2011/AC:2011EN 972:2000+A1:2011/AC:2011
PreviousNext
Corrigendum
EN 972:2000+A1:2011/AC:2011
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gerberei-Maschinen - Walzenmaschinen - SicherheitsanforderungenMachines de tannerie - Machines à cylindres alternatifs - Prescriptions de sécuritéTannery machines - Reciprocating roller machines - Safety requirements59.140.40Stroji in oprema za proizvodnjo usnja in krznaMachines and equipment for leather and fur productionICS:Ta slovenski standard je istoveten z:EN 972:1998+A1:2010/AC:2011SIST EN 972:2000+A1:2011/AC:2011en,fr01-julij-2011SIST EN 972:2000+A1:2011/AC:2011SLOVENSKI
STANDARD



SIST EN 972:2000+A1:2011/AC:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 972:1998+A1:2010/AC
April 2011
Avril 2011
April 2011 ICS 59.140.40 English version Version Française Deutsche Fassung
Tannery machines - Reciprocating roller machines - Safety requirements
Machines de tannerie - Machines à cylindres alternatifs - Prescriptions de sécurité
Gerberei-Maschinen - Walzenmaschinen - Sicherheitsanforderungen This corrigendum becomes effective on 6 April 2011 for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 972:1998+A1:2010(Main)
Tannery machines - Reciprocating roller machines - Safety requirements
SIST EN 972:2000+A1:2011

This European Standard specifies safety requirements for all the phases of the life of a machine listed in
5.3 a) of EN ISO 12100-1:2003.
Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyors which, if required, may also reverse their direction.
This standard covers the following reciprocating roller machines (see figures 1 to 13 for typical configurations and annex D for descriptions):
a)   Buffing machines (see figures 1a and 1b)
b)   Polishing machines (see figures 1a and 1b)
c)   Ironing machines (woolskins and fur) (see figures 2a and 2b)
d)   Carding machines (see figures 3a and 3b)
e)   Shearing machines (woolskins and fur) (see figures 4a and 4b)
f)   Cylinder universal staking machines (see figures 5a and 5b)
g)   Setting-out machines (see figures 6a and 6b)
h)   Dewooling machines (see figures 6a and 6b)
i)   Scudding machines (see figures 6a and 6b)
j)   Unhairing (dehairing) machines (see figures 6a and 6b)
k)   Sammying machines (see figures 6a and 6b)
l)   Cylinder ironing machines (see figures 7a and 7b)
m)   Cylinder staking machines (see figures 8a and 8b)
n)   Fleshing machines (see figures 9a and 9b)
o)   Demanuring machines (see figures 10a and 10b)
p)   Wet wheeling machines (see figures 11a and 11b)
q)   Shaving machines (feed-out) (see figures 12a and 12b)
r)   Shaving machines (feed-in) (see figures 13a and 13b)
It takes account of intended use, foreseeable misuse, component and systems failure.
This European Standard is not applicable to reciprocating roller machines which are manufactured before the date of its publication as EN.
This European Standard provides provisions for the reduction of noise emission at the design stage (see 5.2.4 and Annex A). However, it does not provide a noise test code for the determination by measurement of noise emission values for the machines it covers. Without such a code the manufacturer c

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13113:2002+A1:2010(Main)
Tannery machines - Roller coating machines - Safety requirements
SIST EN 13113:2003+A1:2010

This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description):
a)   single and multi-roller contra-rotating machines (see Figure 2);
b)   single and multi-roller synchronised machines (see Figure 3);
c)   single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4).
The machines are not intended to be used during transportation.
This standard specifies safety requirements for design, construction and operation.
It takes account of intended use, foreseeable misuse, component and systems failure.
This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part.
This document is not applicable to the roller coating machines which are manufactured before the date of its publication as EN.
This standard does not establish any requirements for electromagnetic disturbances.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13114:2002+A1:2009(Main)
Tannery machines - Rotating process vessels - Safety requirements
SIST EN 13114:2003+A1:2010

1.1   This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine.
1.2   This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations):
a)   horizontal rotating vessels;
b)   inclined rotating vessels.
1.3   This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere.
1.4   This standard takes account of intended use, foreseeable misuse, component and systems failure.
The machines are for fixed installation.
1.5   This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN.
1.6   This standard does not establish any requirements for electromagnetic disturbances.
NOTE    Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13112:2002+A1:2009(Main)
Tannery machines - Splitting and bandknife shearing machines - Safety requirements
SIST EN 13112:2003+A1:2010

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of
-   splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials,
-   bandknife shearing machines (see figures 3, 4, 5, 6)
used in the splitting and shearing of leather and synthetic materials.
This standard takes account of intended use, foreseeable misuse, component and systems failure.
The machines are for fixed installation.
This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of its publication as EN.
All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire.
For these hazards general guidelines are proposed in normative annex A.
Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.
This standard does not establish any requirements for electromagnetic disturbances.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1035:1998/AC:2002(Corrigendum)
Tannery machines - Moving platen machinery - Safety requirements
SIST EN 1035:2000/AC:2004

TC - Changes in Figure 4

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1035:1998(Main)
Tannery machines - Moving platen machinery - Safety requirements
SIST EN 1035:2000

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991.  Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with:  - vertical opening and closing movement, - alternative horizontal feed-in and feed-out movement.  This European standard covers the following machines (see figures 1 to 5 for typical configurations and normative annex C for descriptions):  a) vacuum dryers with vertical movement (...);  b) vacuum dryers with horizontal and vertical movement (...);  c) vacuum stretching machines (...);  d) platen ironing and embossing machines with vertical movement (...);  e) platen ironing and embossing machines with horizontal and vertical movement (...).  It takes account of intended use, foreseeable misuse, component and systems failure.  This European Standard applies to the machines manufactured after its date of issue.  All the significant hazards listed in clause 4 are covered by the requirements included in clause 5 except:  - dust, fume, vapour and liquid emissions  for which general guidelines are proposed in the informative annex B.  Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 972:1998/FprA1(Amendment)
Tannery machines - Reciprocating roller machines - Safety requirements
SIST EN 972:2000/kprA1:2010

2009-12-11: WI activated due to delivery of the text.
2009-12-10: OD WI deleted Alert 2
2009-09-09 SJ: Under Alert 2 - can be deleted if no text by end November 2009.
Type 1 amendment.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13112:2002/FprA1(Amendment)
Tannery machines - Splitting and bandknife shearing machines - Safety requirements
SIST EN 13112:2003/kFprA1:2009

Type 1 amendment.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13114:2002/FprA1(Amendment)
Tannery machines - Rotating process vessels - Safety requirements
SIST EN 13114:2003/kFprA1:2009

Amendment type 1.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13113:2002/FprA1(Amendment)
Tannery machines - Roller coating machines - Safety requirements
SIST EN 13113:2003/kFprA1:2010
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day