EN 1035:1998/AC:2002 - Tannery machines - Moving platen machinery

Tannery machines - Moving platen machinery - Safety requirements

TC - Changes in Figure 4

Gerberei-Maschinen - Maschinen mit beweglichen Platten - Sicherheitsanforderungen

Machines de tannerie - Machines à plateaux mobiles - Prescriptions de sécurité

Strojarski stroji - Stroji z gibljivimi ploščami - Varnostne zahteve

General Information

Status

Published

Publication Date

23-Jul-2002

ICS

59.140.40 - Machines and equipment for leather and fur production

Technical Committee

CEN/TC 200 - Tannery machinery - Safety

Drafting Committee

CEN/TC 200 - Tannery machinery - Safety

Current Stage

6060 - Definitive text made available (DAV) - Publishing

Start Date

24-Jul-2002

Completion Date

24-Jul-2002

Ref Project

SIST EN 1035:2000/AC:2004 - Tannery machines - Moving platen machinery - Safety requirements

Relations

Corrects

EN 1035:1998 - Tannery machines - Moving platen machinery - Safety requirements

Effective Date

22-Dec-2008

Buy Standard

Corrigendum

EN 1035:2000/AC:2004

English language

4 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 59 59.140 59.140.40

Standards Content (Sample)

EN 1035:2000/AC:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYHGerberei-Maschinen - Maschinen mit beweglichen Platten - SicherheitsanforderungenMachines de tannerie - Machines a plateaux mobiles - Prescriptions de sécuritéTannery machines - Moving platen machinery - Safety requirements59.140.40Stroji in oprema za proizvodnjo usnja in krznaMachines and equipment for leather and fur productionICS:Ta slovenski standard je istoveten z:EN 1035:1998/AC:2002SIST EN 1035:2000/AC:2004en01-september-2004SIST EN 1035:2000/AC:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1035:1998/ACJuly 2002Juillet 2002Juli 2002ICS 59.140.40English versionVersion FrançaiseDeutsche FassungTannery machines - Moving platen machinery - SafetyrequirementsMachines de tannerie - Machines à plateaux mobiles -Prescriptions de sécuritéGerberei-Maschinen - Maschinen mit beweglichen Platten -SicherheitsanforderungenThis corrigendum becomes effective on 24 July 2002 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 24 juillet 2002 pour incorporation dans les trois versionslinguistiques officielles de l'EN.Die Berichtigung tritt am 24.Juli 2002 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN

EN 972:1998+A1:2010/AC:2011(Corrigendum)

Tannery machines - Reciprocating roller machines - Safety requirements

SIST EN 972:2000+A1:2011/AC:2011

TC - Correction of reference in 5.3.2 a. from EN 1769-2 to EN 1760-2 - Mechanical engineering - Machinery

Corrigendum
2 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 972:1998+A1:2010(Main + Amendment)

Tannery machines - Reciprocating roller machines - Safety requirements

SIST EN 972:2000+A1:2011

This European Standard specifies safety requirements for all the phases of the life of a machine listed in
5.3 a) of EN ISO 12100-1:2003.
Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyors which, if required, may also reverse their direction.
This standard covers the following reciprocating roller machines (see figures 1 to 13 for typical configurations and annex D for descriptions):
a)   Buffing machines (see figures 1a and 1b)
b)   Polishing machines (see figures 1a and 1b)
c)   Ironing machines (woolskins and fur) (see figures 2a and 2b)
d)   Carding machines (see figures 3a and 3b)
e)   Shearing machines (woolskins and fur) (see figures 4a and 4b)
f)   Cylinder universal staking machines (see figures 5a and 5b)
g)   Setting-out machines (see figures 6a and 6b)
h)   Dewooling machines (see figures 6a and 6b)
i)   Scudding machines (see figures 6a and 6b)
j)   Unhairing (dehairing) machines (see figures 6a and 6b)
k)   Sammying machines (see figures 6a and 6b)
l)   Cylinder ironing machines (see figures 7a and 7b)
m)   Cylinder staking machines (see figures 8a and 8b)
n)   Fleshing machines (see figures 9a and 9b)
o)   Demanuring machines (see figures 10a and 10b)
p)   Wet wheeling machines (see figures 11a and 11b)
q)   Shaving machines (feed-out) (see figures 12a and 12b)
r)   Shaving machines (feed-in) (see figures 13a and 13b)
It takes account of intended use, foreseeable misuse, component and systems failure.
This European Standard is not applicable to reciprocating roller machines which are manufactured before the date of its publication as EN.
This European Standard provides provisions for the reduction of noise emission at the design stage (see 5.2.4 and Annex A). However, it does not provide a noise test code for the determination by measurement of noise emission values for the machines it covers. Without such a code the manufacturer c

Standard
48 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 13113:2002+A1:2010(Main + Amendment)

Tannery machines - Roller coating machines - Safety requirements

SIST EN 13113:2003+A1:2010

This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description):
a)   single and multi-roller contra-rotating machines (see Figure 2);
b)   single and multi-roller synchronised machines (see Figure 3);
c)   single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4).
The machines are not intended to be used during transportation.
This standard specifies safety requirements for design, construction and operation.
It takes account of intended use, foreseeable misuse, component and systems failure.
This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part.
This document is not applicable to the roller coating machines which are manufactured before the date of its publication as EN.
This standard does not establish any requirements for electromagnetic disturbances.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Standard
39 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 13114:2002+A1:2009(Main + Amendment)

Tannery machines - Rotating process vessels - Safety requirements

SIST EN 13114:2003+A1:2010

1.1   This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine.
1.2   This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations):
a)   horizontal rotating vessels;
b)   inclined rotating vessels.
1.3   This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere.
1.4   This standard takes account of intended use, foreseeable misuse, component and systems failure.
The machines are for fixed installation.
1.5   This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN.
1.6   This standard does not establish any requirements for electromagnetic disturbances.
NOTE    Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Standard
35 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 13112:2002+A1:2009(Main + Amendment)

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

SIST EN 13112:2003+A1:2010

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of
-   splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials,
-   bandknife shearing machines (see figures 3, 4, 5, 6)
used in the splitting and shearing of leather and synthetic materials.
This standard takes account of intended use, foreseeable misuse, component and systems failure.
The machines are for fixed installation.
This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of its publication as EN.
All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire.
For these hazards general guidelines are proposed in normative annex A.
Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.
This standard does not establish any requirements for electromagnetic disturbances.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Standard
38 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 1035:1998(Main)

Tannery machines - Moving platen machinery - Safety requirements

SIST EN 1035:2000

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991. Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with: - vertical opening and closing movement, - alternative horizontal feed-in and feed-out movement. This European standard covers the following machines (see figures 1 to 5 for typical configurations and normative annex C for descriptions): a) vacuum dryers with vertical movement (...); b) vacuum dryers with horizontal and vertical movement (...); c) vacuum stretching machines (...); d) platen ironing and embossing machines with vertical movement (...); e) platen ironing and embossing machines with horizontal and vertical movement (...). It takes account of intended use, foreseeable misuse, component and systems failure. This European Standard applies to the machines manufactured after its date of issue. All the significant hazards listed in clause 4 are covered by the requirements included in clause 5 except: - dust, fume, vapour and liquid emissions for which general guidelines are proposed in the informative annex B. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Standard
35 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 972:1998/FprA1(Amendment)

Tannery machines - Reciprocating roller machines - Safety requirements

SIST EN 972:2000/kprA1:2010

2009-12-11: WI activated due to delivery of the text.
2009-12-10: OD WI deleted Alert 2
2009-09-09 SJ: Under Alert 2 - can be deleted if no text by end November 2009.
Type 1 amendment.