EN 14516:2006+A1:2010
(Main)Baths for domestic purposes
Baths for domestic purposes
This document specifies requirements, test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for Cleanability and durability.
This document is applicable to all sizes and shapes of baths.
This document does not cover baths for use with medical provisions.
NOTE 1 For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2 Annex A lists characteristics of materials commonly used for manufacturing baths.
Badewannen für den Hausgebrauch
Dieses Dokument legt Anforderungen, Prüfverfahren sowie Verfahren zur Bewertung der Konformität für Badewannen für den Hausgebrauch fest, die sicherstellen, dass das in Übereinstimmung mit den Herstelleranweisungen eingebaute, genutzte und gepflegte Produkt für die Nutzung zur persönlichen Hygiene eine zufrieden stellende !Reinigbarkeit und Dauerhaftigkeit" aufweist.
Dieses Dokument ist auf alle Größen und Formen von Badewannen anwendbar.
Dieses Dokument gilt nicht für Badewannen für spezielle medizinische Anwendungen.
ANMERKUNG 1 Der Begriff „für den Hausgebrauch“ in dieser Norm schließt die Verwendung in Hotels, Studenten-wohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein.
ANMERKUNG 2 Anhang A führt Eigenschaften von Werkstoffen auf, die üblicherweise für die Herstellung von Bade-wannen eingesetzt werden.
Baignoires à usage domestique
Ce document spécifie les exigences, les méthodes d'essai et les modes opératoires pour l'évaluation de la conformité des baignoires à usage domestique et hygiène personnelle assurant que le produit, lorsqu'il est installé, utilisé et entretenu conformément aux instructions du fabricant, répond aux exigences de l’aptitude au nettoyage !et à la durabilité".
Ce document s'applique à toutes les formes et tailles de baignoires.
Ce document ne couvre pas les baignoires utilisées avec des dispositions médicales.
NOTE 1 Pour les besoins de la présente norme, l’expression «à usage domestique» comprend les utilisations dans les hôtels, les logements d’étudiants, les hôpitaux et bâtiments similaires.
NOTE 2 L'Annexe A dresse la liste des caractéristiques des matériaux généralement utilisés pour la fabrication des baignoires.
Kopalne kadi za domačo uporabo
Ta dokument določa zahteve, preskusne metode in postopke za ocenjevanje skladnosti kopalnih kadi za domačo uporabo in osebno higieno, ki zagotavljajo, da bo proizvod, nameščen in vzdrževan v skladu z navodili proizvajalca, izpolnjeval zahteve po zmožnosti čiščenja in trajnosti. Ta dokument velja za vse velikosti in oblike kopalnih kadi.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Badewannen für den HausgebrauchBaignoires à usage domestiqueBaths for domestic purposes91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 14516:2006+A1:2010SIST EN 14516:2006+A1:2010en,fr,de01-oktober-2010SIST EN 14516:2006+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14516:2006+A1
July 2010 ICS 91.140.70 Supersedes EN 14516:2006English Version
Baths for domestic purposes
Baignoires à usage domestique
Badewannen für den Hausgebrauch This European Standard was approved by CEN on 14 December 2005 and includes Amendment 1 approved by CEN on 19 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14516:2006+A1:2010: ESIST EN 14516:2006+A1:2010
Materials . 15Annex B (informative)
Surfaces of baths . 17Annex ZA (informative)
!!!!Clauses of this European Standard addressing the provisions of the EU Construction Products Directive"""" . 18Bibliography . 23
5.3.3.2 Particular requirements for baths made of enamelled steel and enamelled cast iron Baths made from enamelled steel and enamelled cast iron shall comply with the requirements given in Table 2. Table 2 — Requirements for baths made of enamelled steel and enamelled cast iron Requirement Parameter Test method Resistance to boiling water < 10g/m2 ISO 2744 Resistance to cold citric acid Class 2 ISO 2722 Resistance to boiling citric acid < 5g/m² ISO 2742 Resistance to cold sulphuric acid Class 2 EN ISO 8290 Resistance to alkali solutions < 8 g/m² Test apparatus according to ISO 2742 Test solution according to ISO 4533 Duration of test: 2,5 h
5.3.4 Resistance to temperature changes When tested in accordance with !8.3", all baths shall show no evidence of distortion or other defects, e.g. crazing, which will impair their cleanability. Experience has shown that baths manufactured from the stainless steel grades listed in Annex A, enamelled steel, enamelled cast iron and glazed ceramics comply with this requirement. !deleted text" ! 6 Requirements for class 2 products 6.1 General The manufacturer shall provide instructions with each bath covering installation and care. NOTE Annex B gives advice which manufacturers can include in their instructions. SIST EN 14516:2006+A1:2010
6.2 Cleanability 6.2.1 Appearance of surface When a bath is inspected under strong and oblique illumination, the surfaces intended to come into contact with water shall be visibly smooth, non-absorbent and free from inaccessible corners that would impair the cleanability. NOTE Surfaces with cracks, chips, crazing and other similar defects are not considered to be smooth. 6.2.2 Drainage of water Baths shall have at least one waste outlet hole. The dimensions of the waste outlet hole shall comply with the requirements of EN 232. Other dimensions are permissible, if the manufacturer provides or recommends a suitable waste fitting. All water shall empty from the bath unless prevented by surface tension. 6.3 Durability 6.3.1 General Baths shall be readily cleanable for their anticipated working life when normal cleaning and maintenance is carried out. 6.3.2 Materials Experience has shown that baths made from plastics materials, enamelled steel, enamelled cast iron, stainless steel, glazed ceramics or glass and their surfaces intended to come into contact with water have the properties described in 6.3.1." ! 7 Dangerous substances NOTE See
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.