EN 13197:2011/FprA1

Road marking materials - Wear simulator Turntable

This document specifies the requirements for wear simulator test for road marking materials intended for use in both permanent and temporary road markings including those with increased retroreflection under wet and rain conditions, without road studs.
It gives description for the equipment and for test plate’s characteristics; it also gives description for the test method involving road marking materials application, test conditions during wear test, parameters to be measured, frequency of the measurements and expression of the results as a test report.
This document gives also the requirements to be followed when the test is to be used for CE marking purposes.

Straßenmarkierungsmaterialien - Verschleißsimulator

Produits de marquage routier - Simulateurs d’usure tournant

Materiali za označevanje vozišča - Vrtljiva plošča za simulacijo obrabe

General Information

• Status: Not Published
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 226 - Road equipment
• Drafting Committee: CEN/TC 226/WG 2 - Horizontal road signs
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 12-Feb-2014
• Due Date: 03-Mar-2015
• Completion Date: 12-Feb-2014
• Ref Project: SIST EN 13197:2011/kFprA1:2013 - Road marking materials - Wear simulator Turntable

Relations

• Merged Into: EN 13197:2011+A1:2014 - Road marking materials - Wear simulator Turntable
• Effective Date: 19-Jan-2023
• Amends: EN 13197:2011 - Road marking materials - Wear simulator Turntable
• Effective Date: 26-Jun-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13197:2011/kFprA1:2013
01-november-2013
0DWHULDOL]DR]QDþHYDQMHYR]LãþD9UWOMLYDSORãþD]DVLPXODFLMRREUDEH
Road marking materials - Wear simulator Turntable
Straßenmarkierungsmaterialien - Verschleißsimulator
Produits de marquage routier - Simulateurs d’usure tournant
Ta slovenski standard je istoveten z: EN 13197:2011/FprA1
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13197:2011/kFprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13197:2011/kFprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 13197:2011/kFprA1:2013


EUROPEAN STANDARD
FINAL DRAFT
EN 13197:2011
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
September 2013
ICS
English Version
Road marking materials - Wear simulator Turntable
Produits de marquage routier - Simulateurs d'usure Straßenmarkierungsmaterialien - Verschleißsimulator
tournant
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 226.

This draft amendment A1, if approved, will modify the European Standard EN 13197:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13197:2011/FprA1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13197:2011/kFprA1:2013
EN 13197:2011/FprA1:2013 (E)
Contents Page
Foreword . 3
1 Modification to Clause 2 Normative references . 4
2 Modification to 4.6.3 Type of tyres . 4
3 Modification to 4.6.6 Steering and support angles . 4
4 Modification to 7.5 Conditioning . 4
5 Modification to 8.2.2 General test conditions . 5
6 Modification to 8.5.1 Measuring parameters . 5
7 Modification to 8.5.2 Number of measurements in the measurement areas . 5
8 Addition of a new subclause 8.5.4 Optional measuring parameters . 6

2

---------------------- Page: 4 ----------------------

SIST EN 13197:2011/kFprA1:2013
EN 13197:2011/FprA1:2013 (E)

Foreword
This document (EN 13197:2011/FprA1:2013) has been prepared by Technical Committee CEN/TC 226 “Road
equipment”, the secretariat of which is held by AFNOR.
This document is currently submitted to the UAP.
3

---------------------- Page: 5 ----------------------

SIST EN 13197:2011/kFprA1:2013
EN 13197:2011/FprA1:2013 (E)
1 Modification to Clause 2 Normative references
Replace the first paragraph with the following one:
" The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references,
...