Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)

This document specifies the minimum requirements, test methods, marking and information supplied by the manufacturer, for ventilated and non-ventilated gas-tight chemical protective suits for use by emergency teams (ET).
It specifies full body personal protective ensembles to be worn for protection against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Chemicals such as violently air sensitive reagents, unstable explosives and cryogenic liquids have not been considered since protection against these additional hazards is beyond the scope of this standard.
This document does not establish minimum criteria for protection against non-chemical hazards, e.g. radiological, fire, heat and explosive hazards and infective agents. This type of equipment is not intended for total immersion in liquids.
The seams, joins and assemblages attaching the accessories are included within the scope of this standard. The performance criteria for the accessories, gloves, boots or respiratory protective equipment are given in other standards.
Particulate protection is limited to physical penetration of the particulates only.

Schutzkleidung gegen gefährliche feste, flüssige und gasförmige Chemikalien, einschließlich Flüssigkeitsaerosole und feste Partikel - Teil 2: Leistungsanforderungen für Typ 1 (gasdichte) Chemikalienschutzkleidung für Notfallteams (ET)

Dieses Dokument legt die Mindestanforderungen, Prüfverfahren, Kennzeichnung und vom Hersteller zur Verfügung gestellten Informationen für belüftete und unbelüftete gasdichte Chemikalienschutzanzüge zur Benutzung durch Notfallteams (ET, en: emergency team) fest.
Es legt persönliche Ganzkörper Schutzkleidungssysteme fest, die zum Schutz gegen feste, flüssige und gasförmige Chemikalien, einschließlich Flüssigkeitsaerosole und feste Partikel, zu tragen sind. Chemikalien wie stark luftempfindliche Reagenzien, instabile Explosivstoffe und kryogene Flüssigkeiten wurden nicht berücksichtigt, da der Schutz gegen diese zusätzlichen Gefahren außerhalb des Anwendungsbereichs dieser Norm liegt.
Dieses Dokument legt keine Mindestanforderungen an den Schutz vor nicht chemischen Gefahren, z. B. Strahlung, Feuer, Hitze, explosive Gefahren und Infektionserreger, fest. Diese Art der Ausrüstung ist nicht für das vollständige Eintauchen in Flüssigkeiten vorgesehen.
Die Nähte, Verbindungen und Verbünde zum Anbringen der Zubehörteile liegen innerhalb des Anwendungs¬bereichs dieser Norm. Die Leistungsanforderungen für Zubehörteile, Handschuhe, Schutzschuhe oder Atem¬schutzgeräte sind in anderen Normen angegeben.
Der Schutz vor Partikeln ist auf das physische Durchdringen der Partikel begrenzt.

Vêtements de protection contre les produits chimiques dangereux solides, liquides et gazeux, y compris les aérosols liquides et les particules solides - Partie 2: Exigences de performance des combinaisons des protections chimiques étanches aux gaz (Type 1) destinés aux équipes de secours (ET)

Le présent document définit les exigences minimales, les méthodes d’essai, le marquage ainsi que les informations fournies par le fabricant concernant les combinaisons de protection chimique ventilées et non ventilées étanches aux gaz, destinées à être utilisées par des équipes de secours (ET).
Elle décrit les combinaisons individuelles protégeant tout le corps, destinées à être portées pour se prémunir contre les produits chimiques solides, liquides et gazeux, y compris les aérosols liquides et les particules solides. Les produits chimiques tels que les réactifs ultra-sensibles à l'air, les explosifs instables et les liquides cryogéniques n'ont pas été pris en compte, car la protection contre les dangers supplémentaires qu'ils présentent ne relève pas du domaine d'application de la présente norme.
Le présent document n'établit pas de critères minimaux de protection contre les risques non chimiques, par exemple les risques radiologiques, d’incendie, d’explosion ou liés à la chaleur et les agents infectieux. Ce type d’équipement n’est pas prévu pour une immersion totale dans des liquides.
Les coutures, les jonctions et les assemblages servant à fixer les accessoires sont inclus dans le domaine d’application de la présente norme. Les critères de performance pour les accessoires, les gants, les bottes ou l’équipement de protection respiratoire sont mentionnés dans d’autres normes.
La protection contre les particules se limite exclusivement à la pénétration physique des particules.

Varovalna obleka pred nevarnimi trdnimi, tekočimi in plinskimi kemikalijami, vključno s tekočimi in trdnimi aerosoli - 2. del: Varnostne zahteve za kemijsko varovalno obleko, neprepustno za plin (tip 1), za intervencijske enote

Ta evropski standard določa minimalne zahteve, preskusne metode, označevanje in informacije, ki jih mora zagotoviti proizvajalec, za prezračevano in neprezračevano kemijsko varovalno obleko, neprepustno za plin, ki jo uporabljajo intervencijske enote.
Določa komplete osebnih varovalnih oblačil za celotno telo, ki se nosijo za zaščito pred trdnimi, tekočimi in plinskimi kemikalijami, vključno s tekočimi in trdnimi aerosoli. Kemikalije, kot so reagenti, ki so zelo občutljivi na zrak, nestabilen eksplozivni material in kriogene tekočine, niso obravnavane, ker zaščita pred temi dodatnimi nevarnostmi presega področje uporabe tega standarda.
Ta standard ne vzpostavlja minimalnih meril za zaščito pred nekemičnimi nevarnostmi, kot je radiološka nevarnost, nevarnost nastanka požara, nevarnost zaradi vročine, nevarnost eksplozije in nevarnost povzročiteljev infekcije. Ta vrsta opreme ni namenjena popolni potopitvi v tekočine.
Šivi, spoji in sestavi, s katerimi je pritrjena dodatna oprema, spadajo na področje uporabe tega standarda. Merila učinkovitosti za dodatno opremo, rokavice, škornje ali dihalno varovalno opremo so podana v drugih standardih.
Zaščita pred delci je omejena samo na fizično penetracijo delcev.

General Information

Status
Published
Publication Date
26-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Mar-2019
Due Date
18-Sep-2019
Completion Date
27-Mar-2019

Relations

Buy Standard

Standard
EN 943-2:2019
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 943-2:2019
01-maj-2019
1DGRPHãþD
SIST EN 943-2:2002
9DURYDOQDREOHNDSUHGQHYDUQLPLWUGQLPLWHNRþLPLLQSOLQVNLPLNHPLNDOLMDPL
YNOMXþQRVWHNRþLPLLQWUGQLPLDHURVROLGHO9DUQRVWQH]DKWHYH]DNHPLMVNR
YDURYDOQRREOHNRQHSUHSXVWQR]DSOLQ WLS ]DLQWHUYHQFLMVNHHQRWH
Protective clothing against dangerous solid, liquid and gaseous chemicals, including
liquid and solid aerosols - Part 2: Performance requirements for Type 1 (gas-tight)
chemical protective suits for emergency teams (ET)
Schutzkleidung gegen gefährliche feste, flüssige und gasförmige Chemikalien,
einschließlich Flüssigkeitsaerosole und feste Partikel - Teil 2: Leistungsanforderungen
für Typ 1 (gasdichte) Chemikalienschutzkleidung für Notfallteams (ET)
Vêtements de protection contre les produits chimiques dangereux solides, liquides et
gazeux, y compris les aérosols liquides et les particules solides - Partie 2: Exigences de
performance des combinaisons des protections chimiques étanches aux gaz (Type 1)
destinés aux équipes de secours (ET)
Ta slovenski standard je istoveten z: EN 943-2:2019
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN 943-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 943-2:2019

---------------------- Page: 2 ----------------------

SIST EN 943-2:2019


EN 943-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 13.340.10 Supersedes EN 943-2:2002
English Version

Protective clothing against dangerous solid, liquid and
gaseous chemicals, including liquid and solid aerosols -
Part 2: Performance requirements for Type 1 (gas-tight)
chemical protective suits for emergency teams (ET)
Vêtements de protection contre les produits chimiques Schutzkleidung gegen gefährliche feste, flüssige und
dangereux solides, liquides et gazeux, y compris les gasförmige Chemikalien, einschließlich
aérosols liquides et les particules solides - Partie 2: Flüssigkeitsaerosole und feste Partikel - Teil 2:
Exigences de performance des combinaisons des Leistungsanforderungen für Typ 1 (gasdichte)
protections chimiques étanches aux gaz (Type 1) Chemikalienschutzkleidung für Notfallteams (ET)
destinés aux équipes de secours (ET)
This European Standard was approved by CEN on 17 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 943-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 943-2:2019
EN 943-2:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 General performance requirements . 5
5 Additional performance requirements . 5
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.