EN ISO 9455-13:2017

Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)

ISO 9455-13:2017 specifies a method for estimating the tendency of a flux to spatter in use. It is a qualitative (comparative) method and is only applicable to liquid fluxes, as defined in ISO 9454‑1.
The method is not applicable to flux cored solder wire or to solder pastes.

Flussmittel zum Weichlöten - Prüfverfahren - Teil 13: Bestimmung von Flussmittelspritzern (ISO 9455-13:2017)

Flux de brasage tendre - Méthodes d'essai - Partie 13: Détermination des projections de flux (ISO 9455-13:2017)

ISO 9455-13:2017 décrit une méthode pour évaluer la tendance à la formation de projections lors de l'utilisation de flux. Il s'agit d'une méthode qualitative (comparative) et elle n'est applicable qu'aux flux liquides, tels que définis dans l'ISO 9454‑1.
La méthode n'est pas applicable aux fils d'apport fourrés ou aux crèmes à braser.

Talila za mehko spajkanje - Preskusne metode - 13. del: Določanje brizganja talila (ISO 9455-13:2017)

Ta dokument določa metodo, s katero se oceni težnjo, da bo preskušeno topilo pri uporabi brizgalo. Gre za kvalitativno (primerjalno) metodo, ki se uporablja samo za tekoča talila iz standarda ISO 9454-1. Metoda se ne uporablja za mehke spajke v obliki strženske žice ali spajkalne paste.

General Information

• Status: Published
• Publication Date: 19-Sep-2017
• Withdrawal Date: 30-Mar-2018
• ICS: 25.160.50 - Brazing and soldering
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Sep-2017
• Completion Date: 20-Sep-2017
• Ref Project: SIST EN ISO 9455-13:2018 - Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)

Relations

• Replaces: EN ISO 9455-13:1999 - Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996)
• Effective Date: 27-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN ISO 9455-13:2001
7DOLOD]DPHKNRVSDMNDQMH3UHVNXVQHPHWRGHGHO'RORþDQMHEUL]JDQMDWDOLOD
,62
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455
-13:2017)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 13: Bestimmung von
Flussmittelspritzern (ISO 9455-13:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 13: Détermination des projections de
flux (ISO 9455-13:2017)
Ta slovenski standard je istoveten z: EN ISO 9455-13:2017
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 9455-13
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 9455-13:1999
English Version
Soft soldering fluxes - Test methods - Part 13:
Determination of flux spattering (ISO 9455-13:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 13: Flussmittel zum Weichlöten - Prüfverfahren - Teil 13:
Détermination des projections de flux (ISO 9455- Bestimmung von Flussmittelspritzern (ISO 9455-
13:2017) 13:2017)
This European Standard was approved by CEN on 12 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-13:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 9455-13:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-13:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-13:2017 has been approved by CEN as EN ISO 9455-13:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 9455-13
Second edition
2017-08
Soft soldering fluxes — Test
methods —
Part 13:
Determination of flux spattering
Flux de brasage tendre — Méthodes d’essai —
Partie 13: Détermination des projections de flux
Reference number
ISO 9455-13:2017(E)
©
ISO 2017
ISO 9455-13:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 9455-13:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Procedure. 2
7 Expression of the results . 2
8 Test report .
...