EN ISO 9455-13:1999
(Main)Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996)
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996)
Describes a method for estimating the tendency of a flux to spatter in use. It is a qualitative (comparative) method and is only applicable to liquid fluxes, as defined in ISO 9454-1.
Flußmittel zum Weichlöten - Prüfverfahren - Teil 13: Bestimmung von Flußmittelspritzern (ISO 9455-13:1996)
Dieser Teil der ISO 9455 beschreibt eine Methode zur Bestimmung des Spritzverhaltens von Flußmitteln. Es handelt sich dabei um eine qualitative (vergleichende) Methode und ist nur auf Flußmittel anwendbar, die in ISO 9454-1 definiert sind.
Flux de brasage tendre - Méthodes d'essai - Partie 13: Détermination de projections de flux (ISO 9455-13:1996)
La présente partie de PISO 9455 décrit une méthode pour l'évaluation de la tendance à la formation de projections lors de l'utilisation de flux. Il s'agit d'une méthode qualitative (comparative) et elle n'est applicable qu'aux flux liquides, tels que définis dans PISO 9454-1.La méthode n'est pas applicable aux fils d'apport fourrés ou aux crèmes à braser.
Talila za mehko spajkanje - Preskusne metode - 13. del: Določevanje brizganja talila (ISO 9455-13:1996)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flußmittel zum Weichlöten - Prüfverfahren - Teil 13: Bestimmung von Flußmittelspritzern (ISO 9455-13:1996)Flux de brasage tendre - Méthodes d'essai - Partie 13: Détermination de projections de flux (ISO 9455-13:1996)Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996)25.160.50Trdo in mehko lotanjeBrazing and solderingICS:Ta slovenski standard je istoveten z:EN ISO 9455-13:1999SIST EN ISO 9455-13:2001en01-februar-2001SIST EN ISO 9455-13:2001SLOVENSKI
STANDARD
INTERNATIONAL STANDARD IS0 9455-13 First edition 1996-I 2-l 5 Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering Flux de brasage tendre - M&hodes d’essai - Partie 13: D&ermina tion des projections de flux Reference number IS0 9455-l 3:1996(E) SIST EN ISO 9455-13:2001
IS0 9455=13:1996(E) Foreword 60 {the International Organization for Standardization) is a worldwide fed- eratjon of national standards bodies lS0 member bodies). The work of preparing lnternationai Standards is normally carried out through lS0 technical committees. Each membe body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part rn the work. IS0 collaborates closely with the international Electrotechnscaj Commrssron (IEC) on ail matters of electrotechnical standardizatron. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an international Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 9455-13 was prepared by Technical Committee lSO/TC 44, Welding and allied processes, Subcommittee SC 12, Soldering and brazing materials. IS0 9455 consists of the following parts under the general title Soft soldering fluxes - Test methods: Part 1: Determination of non-volatile matter, gravimetric method Part 2: Determination of non-volatile matter, ebulliome tric method - Part 3: Determination of acid value, potentiometric and visual titration methods - Part 5: Copper mirror test - Part 6: Determination and detection of halide (excluding fluoride) content Part 8: Determination of zinc content - Part 9: Determination of ammonia content Part 70: Flux efficacy tests, solder spread method 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electrontc or mechanical, including photocopyrng and mrcrofilm, without permission in writing from the publisher. International Organtzatron for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 9455-13:2001
@ IS0 IS0 9455=13:1996(E) - Part 7 I: Solubility of flux residues - Part 12: Steel tube corrosion test - Part 13: Determination of flux spattering - Part 14: Assessment of tackiness of flux residues - Part 7 5: Copper corrosion test - Part 16: Flux efficacy tests, wetting balance method - Part 17: Surface insulation resistance, comb test and electrochemical migration test of flux residues. III SIST EN ISO 9455-13:2001
This page intentionally left blank SIST EN ISO 9455-13:2001
INTERNATIONAL STANDARD 0 IS0 IS0 9455~‘I3:1996(E) Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering 1 Scope This part of IS0 9455 describes a method for estimating the tendency of a flux to spatter in use. it is a qualitative (comparative) method and is only applicable to liquid fluxes, as defined in IS0 9454-l. The method is not applicabl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.